Sacnahe Tattoo Transfer Stencil Machine Copier Printer Instruction Manual

1. Introducció i finalview

The Sacnahe Thermal Copier is designed to efficiently transfer tattoo designs onto stencil paper. This device offers a low-noise operation and stable performance, aiming to streamline the tattoo preparation process. It is lightweight and portable, making it suitable for various work environments.

The transfer process is quick, typically completing clear patterns in about 10 seconds, without the need for ink or replacement parts. It supports A4 and A5 paper sizes and is compatible with 100-240V, allowing for international use.

Note: If poor print quality occurs after multiple uses, open the printer cover to cool it and wipe the print head with alcohol to restore quality.

2. Product Components and Diagram

Familiarize yourself with the components of your Sacnahe Tattoo Transfer Stencil Machine:

Image: Diagram of the Sacnahe Tattoo Transfer Stencil Machine, highlighting key parts and dimensions.

• Interruptor d'alimentació: Situat al lateral de la màquina.
• Tauler d'operacions: Contains buttons for Mirror, Photo, Deepness I, Deepness II, Power, Error, Stop, and Copy.
• Function Indicator Lights: LEDs indicating selected mode and status.
• Llum d'advertència: Indicates overheating or errors.
• Transfer Paper Cover: Protects the paper input area.
• Document Input Mouth: Where the original design document is inserted.
• Document Output Mouth: Where the original design document exits.
• Transfer Paper Input Mouth: Where the stencil paper is inserted.
• Transfer Paper Output Mouth: Where the completed stencil paper exits.

3. Instruccions de configuració

1. Desempaquetar la màquina: Carefully remove the transfer machine and all accessories from the packaging.
2. Connectar l'alimentació: Plug the power cord into the machine's power port and then into a suitable electrical outlet.
3. Encès: Turn on the power switch located on the side of the machine. Allow a few minutes for the machine to warm up. The indicator lights on the operation panel should illuminate.
4. Prepare Stencil Paper: Take an A4 4-layer tattoo transfer paper. Remove the protective sheet from the yellow bottom paper.
5. Load Stencil Paper: Insert the yellow bottom paper into the Transfer Paper Input Mouth, ensuring it is aligned and flat to prevent jams.

Image: Visual guide showing the step-by-step process of preparing and loading transfer paper into the machine.

4. Instruccions de funcionament

Follow these steps to create a tattoo stencil:

1. Seleccioneu el mode: On the operation panel, choose your desired mode:
   • Mirall: For designs that need to be mirrored (e.g., text or specific orientations).
   • Foto: For designs with more intricate details or shading.
2. Adjust Deepness: Select the transfer deepness:
   • Deepness I: Lighter transfer effect (normal).
   • Deepness II: Darker transfer effect.
3. Insert Original Design: Insert your printed pattern document into the Document Input Mouth with the back facing you. The machine will automatically feed the document.
4. Inicia la transferència: Premeu el blau CÒPIA button. The machine will begin the transfer process. You may need to gently assist the transfer paper to ensure smooth feeding.
5. Check Transfer: Once the transfer is complete, remove the stencil paper and check the transfer effect.

Image: Close-up of the machine's operation panel, showing the various function buttons and indicator lights.

5. Manteniment

• Cleaning the Print Head and Roller: If the transferred pattern shows black lines or poor quality, open the machine cover and carefully wipe the print head and roller with alcohol. This helps remove any accumulated residue.
• Refredant: After prolonged continuous use, the machine may overheat. Open the machine cover to allow it to cool down sufficiently before resuming operation.

6. Solució De Problemes

• Poor Print Quality (Faded/Blurred): If transfers are faded or blurred, ensure the print head and roller are clean. Wipe them with alcohol as described in the Maintenance section. Also, ensure the original design is clear and not overly complex or shaded.
• Embussos de paper: To prevent paper jams, avoid continuous transfer of complex patterns. Allow the machine to cool down if it feels warm. Ensure transfer paper is inserted flat and aligned.
• Sobreescalfament: If the red warning light appears, the machine is overheating. Open the cover and let it cool down before continuing. Complex or large shaded patterns can cause overheating.

7. Especificacions

• Dimensions del producte: 11.4 x 8.9 x 3.2 polzades
• Pes: 4.25 lliures
• UPC: 778739888588
• ASIN: B092TQ9LQN
• Fabricant: Sacnahe
• GTIN: 778739888588

8. Important Notes and Precautions

• This transfer machine is not a printer and has no ordinary printing function. It is solely for transferring designs.
• This printer is best suited for line drafts and totem-type manuscripts with a white background. The transfer effect may not be optimal for images with heavy matte or blurred backgrounds.
• The only consumable required is transfer paper; no ink is needed.
• The maximum transfer size is A4. For larger patterns, separate transfers are required.
• The machine cannot connect to a mobile phone or computer.

9. Garantia i Suport

This product comes with a 30-day return policy for refund or replacement.

For any questions or support regarding your Sacnahe Tattoo Transfer Stencil Machine, please contact the seller, Sacnahe Direct, through your purchase platform.