Avide RGB LED Strip Light Kit

1. Instruccions de seguretat

Si us plau, llegiu atentament aquestes instruccions abans de la instal·lació i l'ús. Conserveu aquest manual per a futures consultes.

• Assegureu-vos que la font d'alimentació estigui desconnectada abans de la instal·lació o el manteniment.
• This product is designed for indoor use unless otherwise specified.
• Do not expose the LED strip to direct water or excessive humidity unless it is specifically rated for such conditions (IP65 rating indicates protection against water jets, but not submersion).
• Do not cut the LED strip unless marked with designated cutting points. Cutting elsewhere may damage the strip.
• Feu servir només l'adaptador de corrent proporcionat. L'ús d'un adaptador incompatible pot causar danys o incendis.
• Avoid bending the LED strip sharply, as this can damage the internal circuitry.
• Mantenir fora de l'abast dels nens.

2. Contingut del paquet

Verifiqueu que tots els components siguin presents al paquet:

• 1x Avide RGB LED Strip (5 meters)
• 1x adaptador de corrent (12V)
• 1x comandament a distància

Image: The Avide RGB LED Strip Light Kit, showing the coiled 5-meter LED strip, the included remote control, and the power adapter. Key specifications like 330 lumen/m, 7.2W/meter, 1650 lumen total, and IP65 rating are visible on the packaging.

3. Configuració

1. Prepara la superfície: Ensure the surface where the LED strip will be mounted is clean, dry, and smooth. Dust or uneven surfaces can affect the adhesive.
2. Desenrotlleu la tira de LED: Carefully unroll the entire 5-meter LED strip. Avoid kinking or twisting the strip.
3. Connect the Strip to the Controller: Connect the 4-pin connector of the LED strip to the corresponding 4-pin port on the RGB controller (usually a small white box attached to the adapter cable). Ensure the arrows on both connectors align.
4. Connecteu l'adaptador de corrent: Plug the DC output of the 12V power adapter into the input port of the RGB controller.
5. Muntar la tira de LED: Peel off the protective backing from the adhesive tape on the back of the LED strip. Carefully press the strip onto the desired surface, applying even pressure along its length.
6. Connectar-se a l'alimentació: Once the strip is securely mounted and all connections are made, plug the power adapter into a standard electrical outlet.

4. Instruccions de funcionament

Use the included remote control to operate the LED strip:

• ON/OFF: Premeu el botó ON botó per encendre els llums i el OFF botó per desactivar-los.
• Selecció de color: Press the colored buttons (R, G, B, W, and other color swatches) to select a static color.
• Ajust de brillantor: Use the brightness up (▲) and brightness down (▼) buttons to adjust the intensity of the selected color or mode.
• Modes dinàmics:
  • FLASH: Canvia pels colors ràpidament.
  • ESTROBA: Parpelleja d'un sol color.
  • ESMOLIR: Transicions suaus entre colors.
  • LLIS: Provides a gradual, continuous color change.

Ensure the remote control is pointed towards the IR receiver on the LED strip controller for optimal response.

5. Manteniment

• Neteja: Disconnect power before cleaning. Gently wipe the LED strip with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
• Emmagatzematge: If storing the LED strip, ensure it is clean and dry. Coil it loosely to prevent damage to the internal wiring. Store in a cool, dry place.
• Inspecció: Periodically inspect the strip and connections for any signs of damage or wear.

6. Solució De Problemes

• LED strip does not light up:
  • Check if the power adapter is securely plugged into both the wall outlet and the controller.
  • Ensure the 4-pin connector between the strip and controller is correctly aligned and fully inserted.
  • Verifiqueu que les piles del comandament a distància funcionin i que estiguin correctament inserides.
  • Premeu el botó ON del comandament a distància.
• El comandament a distància no funciona:
  • Assegureu-vos que no hi hagi obstacles entre el comandament a distància i el receptor d'infrarojos del controlador.
  • Replace the remote control battery if necessary.
  • Ensure the remote is pointed directly at the IR receiver.
• Els colors són incorrectes o inconsistents:
  • Check the 4-pin connector for proper alignment. Misalignment can cause incorrect color display.
  • Ensure the strip is not damaged.

7. Especificacions

Image: Energy efficiency label indicating an A+ rating for the LED strip, with an energy consumption of 8kWh/1000h.

8. Garantia i Suport

For warranty information, technical support, or service inquiries, please refer to the documentation provided at the point of purchase or contact your retailer. Keep your proof of purchase for warranty claims.