1. Introducció
This manual provides instructions for the WINFLIKE RC-406 replacement remote control, designed for use with various Kenwood CD Receivers and Dual DIN Sized CD Receivers. This remote offers a convenient way to control your audio system with sensitive keys and an ergonomic design.
Compatible Kenwood Models include:
- KDC-200UB, KDC-100UR, KDC-100UG, KDC-1010U, KDC-200UV, KDC-100UW, KDC-100UA
- KDC-X398, KDC-358U, KDC-X704, KDC-X304, KDC-BT778HD, KDC-BT378U, KDC-BT360U, KDC-BT34, KDC-BT278U, KDC-MP378BT
- KDC-100UBS, KDC-100UB, KDC-10UR, KDC-170Y, KDC-150RY
- KMM-BT728HD, KMM-X704, KMM-BT240U, KMM-BT322U, KMM-BT322, KMM-BT228U, KMM-BT328, KMM-BT260U, KMM-BT222U
- KMR-M322BT, KMM-BT328U, KMR-M328BT, KMR-D378BT, KMR-D358
- KDC-181UWM, KDC-161URM, KDC-151UBM, KMM-BT522HD
- Dual DIN Sized CD Receivers: DPX794BH, DPX594BT, DPX560BT, DPX524BT, DPX504BT, DPX304MBT, DPX793BH, DPX593BT, DPX540BT, DPX523BT, DPX503BT, DPX303MBT
Imatge 1.1: Anglesa view of the WINFLIKE RC-406 remote control, showing its ergonomic shape and button layout.
2. Configuració
2.1. Instal·lació de bateries
The RC-406 remote control requires two AAA batteries (not included). Follow these steps to install them:
- Localitzeu la tapa del compartiment de la bateria a la part posterior del comandament a distància.
- Feu lliscar la tapa cap avall o premeu el pestell (si n'hi ha) per obrir el compartiment.
- Introduïu dues piles AAA, assegurant-vos que els terminals positiu (+) i negatiu (-) s'alineïn correctament amb les marques de l'interior del compartiment.
- Feu lliscar la tapa del compartiment de la bateria fins que faci clic de manera segura.
Imatge 2.1: posterior view of the RC-406 remote control, indicating the battery compartment location.
2.2. No Programming Required
This replacement remote control is pre-programmed and does not require any additional setup or programming. Once the batteries are correctly installed, the remote is ready for immediate use with your compatible Kenwood CD Receiver.
3. Instruccions de funcionament
The RC-406 remote control provides full access to the functions of your Kenwood CD Receiver. Familiarize yourself with the button layout and their corresponding functions.
Imatge 3.1: De dalt a baix view of the RC-406 remote control, highlighting the various buttons and their labels.
3.1. Funcions dels botons més amuntview
| Botó | Funció |
|---|---|
| VOL ▲/▼ | Ajusta el nivell de volum amunt o avall. |
| SRC | Selects the audio source (e.g., CD, Tuner, USB, Bluetooth). |
| OFF | Turns the receiver power off. |
| ATT | Activates or deactivates the attenuator function, reducing audio output. |
| AUD | Accesses audio control settings (e.g., bass, treble, balance). |
| ENT / ▶▶ | Confirms selections or plays/pauses media. |
| ◀◀ / ▶▶ | Skips tracks/chapters backward or forward. |
| ▲ / ▼ | Navigation buttons for menu selection or tuning. |
| DIRECT / OK | Direct input or confirmation. |
| *AM- / #FM+ | Selects AM or FM radio bands. |
| 0-9 | Numeric keypad for direct track selection or radio preset recall. |
| Green Call Button | Initiates a call (if connected to a compatible Bluetooth device). |
| Red End Call Button | Ends a call (if connected to a compatible Bluetooth device). |
4. Manteniment
4.1. Neteja
- To clean the remote control, use a soft, dry cloth.
- Do not use abrasive cleaners, solvents, or alcohol, as these can damage the surface or markings.
4.2. Substitució de la bateria
- Replace batteries when the remote's range decreases or it becomes unresponsive.
- Always replace both batteries at the same time with new AAA alkaline batteries.
- No barregeu piles velles i noves o diferents tipus de piles.
- Traieu les piles si no feu servir el comandament a distància durant un període prolongat per evitar fuites.
4.3. Emmagatzematge
- Guardeu el comandament a distància en un lloc fresc i sec, lluny de la llum solar directa i de temperatures extremes.
- Eviteu deixar caure el comandament a distància o exposar-lo a la humitat.
5. Solució De Problemes
If you experience issues with your RC-406 remote control, refer to the following common problems and solutions:
- El comandament a distància no respon:
- Assegureu-vos que les piles estiguin inserides correctament amb la polaritat correcta (+/-).
- Replace the batteries with new AAA alkaline batteries.
- Check for any obstructions between the remote control and the Kenwood receiver's infrared sensor.
- Ensure you are within the effective operating range (up to 33 feet) and pointing the remote directly at the receiver.
- Interval de funcionament curt:
- This usually indicates low battery power. Replace the batteries with new ones.
- Ensure there are no strong light sources (like direct sunlight or fluorescent lights) interfering with the infrared signal.
- Certain buttons do not work:
- Verify that the button function is supported by your specific Kenwood receiver model.
- Clean the remote control surface and buttons to ensure no debris is obstructing button presses.
6. Especificacions
| Característica | Detall |
|---|---|
| Marca | WINFLIKE |
| Número de model | WL-RC-406-S1-210515 |
| Tecnologia de connectivitat | Infrarojos (IR) |
| Característiques especials | Ergonomic, Lightweight, No Programming Required |
| Maximum Number of Supported Devices | 18 (referring to compatible Kenwood models) |
| Interval màxim | 33 peus |
| Tipus de bateria | 2 x AAA Alkaline batteries (not included) |
| Pes de l'article | 27.22 g |
| Dimensions de l'article (L x A x A) | 6"L x 2"W x 0.5"H (approximately) |
7. Garantia i Suport
For any questions, technical assistance, or support regarding your WINFLIKE RC-406 remote control, please contact the seller or manufacturer directly through your purchase platform. Please retain your proof of purchase for any warranty claims.