Pedrollo SKRm2 Self-Priming Centrifugal Pump Instruction Manual

1. Introducció

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Pedrollo SKRm2 Single Phase 220V 60Hz Self-Priming Centrifugal Pump. The SKRm2 pump is designed for use with clean water and non-aggressive liquids, suitable for domestic and civil applications such as water distribution with pressure tanks and irrigation. Its self-priming capability allows it to pump water even when air is present in the suction line.

Key features of the Pedrollo SKRm2 pump include:

• Construcció robusta: Built with a cast iron body for durability and longevity.
• Capacitat d'autoaspirant: Efficiently pumps water even with air present.
• Industrial-Grade Performance: Delivers a maximum flow rate of 106 GPM and a head of up to 116 ft.
• Aplicacions versàtils: Ideal for water distribution, irrigation, and similar uses.
• Fàcil d'utilitzar: User-friendly design requiring minimal maintenance.

2. Informació de seguretat

Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Read all instructions carefully before operating the pump.

• Ensure the pump is installed by a qualified professional in accordance with local electrical and plumbing codes.
• Verify that the power supply matches the pump's requirements (220V, 60Hz, Single Phase).
• Do not operate the pump with damaged wiring or if it has been dropped or damaged.
• Desconnecteu sempre l'alimentació abans de realitzar qualsevol manteniment o servei.
• Mantingueu les mans i la roba allunyades de les parts mòbils.
• No bombeu líquids inflamables o corrosius.

3. Configuració i instal·lació

Proper installation is crucial for the pump's performance and longevity. Refer to the diagram below for a standard installation setup.

1. Muntatge: Munteu la bomba de manera segura sobre una superfície estable i plana per minimitzar les vibracions.
2. Línia d'aspiració: Connect a rigid suction pipe to the pump's inlet. Ensure the suction line is airtight to prevent air leaks, which can affect self-priming.
3. Vàlvula antiretorn: Install a non-return valve (foot valve) at the end of the suction line, submerged in the water source, to prevent water from flowing back when the pump is off.
4. Delivery Line: Connect the delivery pipe to the pump's outlet.
5. Connexió elèctrica: Connect the pump to a dedicated 220V, 60Hz, single-phase power supply circuit protected by an appropriate circuit breaker. Consult an electrician for proper wiring.
6. Cebament: Before initial startup, fill the pump casing completely with water through the priming port (if available) until water overflows. This assists the self-priming process.

4. Funcionament

Once installed and primed, the Pedrollo SKRm2 pump is ready for operation.

1. Posada en marxa inicial: After priming, switch on the power supply to the pump. The pump will begin to draw water.
2. Autoamorçant: The SKRm2 is designed to self-prime. If the pump does not draw water within a few minutes, switch it off, re-check the priming, and ensure there are no air leaks in the suction line.
3. Funcionament continu: Monitor the pump during operation for any unusual noises or vibrations. Ensure the pump is not running dry, as this can cause damage.
4. Tancar: To stop the pump, simply switch off the power supply.

5. Performance Data

The following graph illustrates the characteristic curves and performance data for the Pedrollo SKRm2 pump at 60 Hz.

6. Manteniment

The Pedrollo SKRm2 pump is designed for minimal maintenance. Regular checks can help ensure optimal performance and extend its lifespan.

• Inspecció periòdica: Periodically inspect the pump for any signs of leaks, corrosion, or damage to the casing o cablejat.
• Neteja: Keep the pump and its surroundings clean and free from debris.
• Foot Valve/Filter: Regularly check and clean the foot valve and filter on the suction line to prevent blockages and ensure unrestricted water flow.
• Hivernització: In freezing conditions, drain the pump completely to prevent damage from ice expansion.
• Servei professional: For any complex issues or internal component checks, consult a qualified service technician.

7. Solució De Problemes

This section provides solutions to common operational issues. Always disconnect power before attempting any troubleshooting steps.

• La bomba no arrenca:
  • Comproveu la font d'alimentació i l'interruptor.
  • Assegureu-vos que les connexions elèctriques siguin segures.
  • Verify motor is not seized (consult a technician).
• La bomba funciona però no subministra aigua:
  • Check if the pump is properly primed.
  • Inspect the suction line for air leaks.
  • Clean the foot valve/filter for blockages.
  • Ensure the water source level is adequate.
• Reduced flow or pressure:
  • Check for partial blockages in suction or delivery lines.
  • Inspect the impeller for wear or debris (consult a technician).
  • Verify the pump is operating within its specified performance curve.
• Soroll o vibració excessius:
  • Assegureu-vos que la bomba estigui ben muntada.
  • Check for cavitation (air in the suction line).
  • Inspect for worn bearings or impeller imbalance (consult a technician).

8. Especificacions tècniques

9. Garantia i Suport

For warranty information, please refer to the documentation provided with your purchase or contact your authorized Pedrollo dealer. For technical support or service inquiries, please reach out to Pedrollo customer service or an authorized service center.