Phanteks Glacier One 360MPH D-RGB AIO Liquid CPU Cooler Instruction Manual

1. Introducció

The Phanteks Glacier One 360MPH is an all-in-one liquid CPU cooler designed for efficient and quiet cooling of powerful CPUs. It features a triple 120mm MP PWM fan configuration, optimized for high airflow and static pressure. The cooler includes an infinity mirror pump cap design with integrated D-RGB lighting and D-RGB Halos Fan Frames for customizable aesthetics. This manual provides instructions for installation, operation, and maintenance of your Glacier One 360MPH cooler.

Image 1.1: The Phanteks Glacier One 360MPH AIO Liquid CPU Cooler, showcasing its white aesthetic and infinity mirror pump design.

2. Configuració i instal·lació

The Glacier One 360MPH is pre-filled for a plug-and-play installation. Ensure your system is powered off and disconnected from the power source before beginning installation.

2.1. Compatibilitat

This cooler is compatible with the following CPU sockets:

• Sòcols Intel: LGA 115x, 1366, 2011, 2011-3, 2066, 1200
• Sòcols AMD: AM4, sTRX4*, TR4* (*Threadripper bracket included with CPU)

2.2. Component Overview

Familiarize yourself with the main components of your AIO cooler.

Imatge 2.1: acabatview of the Glacier One 360MPH, showing the radiator with three fans, pump block, and tubing.

Image 2.2: Close-up of the pump block and the detachable infinity mirror cap.

2.3. Passos d'instal·lació (generals)

1. Prepara la placa base: Install the appropriate backplate and standoffs for your CPU socket.
2. Aplicar pasta tèrmica: The cooler comes with thermal paste pre-applied. If reapplying, ensure the CPU surface is clean.
3. Muntar el bloc de la bomba: Secure the pump block onto the CPU, ensuring even pressure.
4. Muntar el radiador: Install the radiator and fans into your PC case. The flexible braided tubing and included Tube Clips assist in routing.
5. Connectar els cables: Connect the pump PWM cable, D-RGB 3-PIN cable, and fan PWM cables to the motherboard or a D-RGB controller.

Refer to your motherboard and PC case manuals for specific mounting locations and cable routing options.

Image 2.3: The Glacier One 360MPH installed within a computer case, showing the radiator mounted at the top and the pump block on the CPU.

3. Instruccions de funcionament

3.1. D-RGB Lighting Control

The integrated D-RGB lighting in the infinity mirror pump cap and the D-RGB Halos Fan Frames can be controlled and synchronized. Connect the D-RGB 3-PIN cable to a compatible D-RGB header on your motherboard or a Phanteks D-RGB controller. Use your motherboard's RGB software or Phanteks' D-RGB software to customize lighting effects.

3.2. Fan and Pump Operation

The three 120mm MP PWM fans and the pump are PWM controlled. This allows for dynamic speed adjustments based on CPU temperature, optimizing for both cooling performance and noise levels.

• Velocitat del ventilador: 500 - 2200 ± 10% RPM.
• Velocitat de la bomba: PWM controlled, 2800 RPM ± 300 (boosts to 3600 RPM > 60°C liquid temp).

Adjust fan and pump curves via your motherboard's BIOS/UEFI settings or dedicated fan control software for optimal performance and acoustics.

4. Manteniment

The Phanteks Glacier One 360MPH is a closed-loop AIO system, requiring minimal maintenance. Regular checks can help ensure optimal performance and longevity.

• Eliminació de pols: Netegeu periòdicament la pols de les aletes del radiador i de les pales del ventilador amb aire comprimit. Assegureu-vos que els ventiladors no girin durant la neteja.
• Gestió de cables: Verify all cables (PWM, D-RGB) are securely connected and not obstructing airflow.
• Inspecció de tubs: Check the braided tubing for any signs of wear, kinks, or leaks.
• Bloc de bombament: Ensure the pump block is securely mounted to the CPU.

5. Solució De Problemes

Aquesta secció tracta problemes comuns que podeu trobar.

5.1. High CPU Temperatures

• Comprovació de la connexió de la bomba: Ensure the pump's PWM cable is correctly connected to the motherboard's CPU_FAN or AIO_PUMP header and is receiving power.
• Comproveu el funcionament del ventilador: Confirm that all three fans are spinning. Check their PWM connections.
• Pasta tèrmica: Ensure the thermal paste application is adequate and the pump block makes full contact with the CPU.
• Flux d'aire: Verify that the radiator fans are oriented correctly for optimal airflow (intake or exhaust, depending on case configuration).

5.2. D-RGB Lighting Not Working

• Connexió per cable: Ensure the D-RGB 3-PIN cable is securely connected to a compatible 5V D-RGB header on your motherboard or controller.
• Programari: Check your motherboard's RGB software or Phanteks' D-RGB software to ensure lighting effects are enabled and configured correctly.
• Compatibilitat: Confirm your motherboard's D-RGB header is 5V (3-PIN) and not 12V (4-PIN), as incompatible connections can cause damage.

5.3. Excessive Noise

• Soroll del ventilador: Adjust fan speed curves in BIOS/UEFI or software to reduce RPMs at lower temperatures. Check for any obstructions or loose fan screws.
• Soroll de la bomba: Ensure the pump is running at an appropriate speed. Some pump noise can be normal, especially at higher RPMs. Verify the pump is the highest point in the loop to prevent air bubbles from accumulating in the pump.

6. Especificacions

7. Garantia i assistència

7.1. Informació de la garantia

Aquest producte està cobert per a 1 any de garantia del fabricant. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official Phanteks weblloc.

7.2. Suport tècnic

Per a més ajuda, suport tècnic o per a view additional resources, please visit the official Phanteks weblloc web o poseu-vos en contacte amb el seu servei d'atenció al client. També podeu visitar el Phanteks Store on Amazon per a informació del producte.