Franke 115.0600.095
FRANKE 115.0600.095 Centro Kitchen Faucet Instruction Manual
Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of your FRANKE 115.0600.095 Centro Kitchen Faucet. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product. Keep this manual for future reference.
Informació de seguretat
Important: Always turn off the main water supply before beginning any installation or maintenance work on the faucet. It is recommended that installation be performed by a qualified plumber to ensure compliance with local plumbing codes and safety standards. Use appropriate tools and wear protective gear during installation.
- Assegureu-vos que totes les connexions estiguin ben fixades per evitar fuites.
- No estrenyeu massa les connexions, ja que això pot danyar els components.
- Protect the faucet's chrome finish from abrasive materials or harsh chemicals.
Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar la instal·lació:
- FRANKE 115.0600.095 Centro Kitchen Faucet
- Maquinari de muntatge
- Mànegues de connexió
Configuració i instal·lació
The FRANKE 115.0600.095 Centro Kitchen Faucet is designed for deck mounting with a single hole installation. Follow these general steps for installation:
- Prepareu la superfície de muntatge: Ensure the sink or countertop has a mounting hole with a diameter of Ø35 mm. The maximum deck thickness should be considered for proper installation.
- Instal·leu l'aixeta: Insert the faucet body into the mounting hole. Secure it from underneath the sink using the provided mounting hardware (washer and nut). Ensure the faucet is oriented correctly before fully tightening.
- Connecteu les línies d'aigua: Attach the hot and cold water supply lines to the corresponding inlets on the faucet. Connect the other ends to your hot and cold water supply valves. Hand-tighten first, then use a wrench for a quarter turn to ensure a leak-free seal.
- Comproveu si hi ha fuites: Once all connections are made, slowly turn on the main water supply. Check all connections for any signs of leaks. If leaks are detected, tighten the connections slightly until the leak stops.

A detailed technical diagram providing all necessary measurements and installation specifications for the faucet. Note the Ø35 mm mounting hole and 150° spout rotation.
Instruccions de funcionament
The FRANKE 115.0600.095 Centro Kitchen Faucet features a single mixer lever positioned at the top for easy control of water flow and temperature. The spout has a fixed position but offers a 150° rotation for convenience.
- Control del flux i la temperatura de l'aigua: Move the lever upwards to increase water flow and downwards to decrease it. Move the lever left for hot water and right for cold water.
- Tecnologia d'estalvi d'aigua: This faucet incorporates a two-stage flow reduction system. When opening the lever, it will initially stop at a halfway point, naturally limiting water flow to reduce consumption by up to 50%. For a full flow, simply push the lever further upwards past this resistance point.
- Laminar Jet: The special design of the aerator provides a compact and crystal-clear water stream, significantly reducing splashing during use.
- Rotació del broc: The faucet spout can be rotated up to 150 degrees, allowing for flexible use across different sink bowls or areas.

The faucet is shown installed in a kitchen environment, highlighting its design and functionality in a typical setting.

Aquesta imatge mostra un detall view of the faucet's aerator, which produces a compact and splash-reducing laminar water stream.
Manteniment i cura
To maintain the appearance and functionality of your FRANKE 115.0600.095 Centro Kitchen Faucet, follow these care guidelines:
- Neteja de l'acabat: Clean the chrome finish regularly with a soft cloth and mild soap or a non-abrasive cleaner specifically designed for chrome. Rinse thoroughly with clean water and dry with a soft cloth to prevent water spots.
- Eviteu productes químics durs: Do not use abrasive cleaners, scouring pads, ammonia-based cleaners, or cleaners containing bleach, acids, or alcohol, as these can damage the chrome finish and internal components.
- Neteja de l'aireador: If water flow becomes restricted, the aerator may be clogged with mineral deposits. Unscrew the aerator from the spout, clean it under running water, and remove any debris. Reassemble the aerator securely.
Resolució de problemes
Si teniu problemes amb l'aixeta, consulteu els següents problemes i solucions habituals:
| Problema | Causa possible | Solució |
|---|---|---|
| Baix cabal d'aigua | Airejador obstruït o vàlvula de subministrament parcialment tancada. | Clean the aerator (see Maintenance section). Ensure water supply valves are fully open. |
| Fuites de connexions | Connexions soltes o segells danyats. | Turn off water supply. Carefully tighten connections. Inspect and replace seals if damaged. |
| Dripping from spout | Worn ceramic cartridge. | Contact Franke customer support for a replacement ceramic cartridge. |
Especificacions
- Número de model: 115.0600.095
- Tipus: High-pressure mixer faucet
- Acabat: Chrome
- Cartutx: Ceramic cartridge Ø 35 mm
- Mixer Lever Position: A dalt
- Rotació del broc: 150°
- Diàmetre del forat de muntatge: Ø35 mm
- Tipus de bec: Bec fix
- Material (Handle/Lever): Ceràmica
- Dimensions del producte: 23.7 x 25.3 x 5 cm (aproximadament)
- Pes de l'article: 2.33 kg
- Característiques especials: Water Saving Technology, Laminar Jet
Garantia i Suport
For warranty information or technical support, please refer to the documentation provided with your purchase or visit the official Franke website. Contact Franke customer service for assistance with parts, service, or any questions not covered in this manual.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.