1. Introducció
This manual provides detailed instructions for the assembly, operation, and maintenance of your FLEXISPOT EN1 Electric Standing Desk. Please read this manual thoroughly before assembly and use to ensure safe and correct operation.
Advertències de seguretat
- No supereu el pes màxim recomanat de 176 lliures (80 kg).
- Ensure proper assembly and stability to avoid tipping.
- Use the electric height adjustment system carefully to maintain a safe working environment.
- Mantingueu els nens i les mascotes allunyats de l'escriptori durant el funcionament.
- Ensure no obstacles are in the desk's path during height adjustments.
2. Contingut del paquet
Verify that all components are present before beginning assembly. Refer to the assembly video for visual guidance.
Video: FLEXISPOT Standing Desk Frame Installation Guide. This video provides a visual guide to the assembly process, including identifying all parts.
El paquet normalment inclou:
- Desktop (One-piece, 48x24 inches, Black)
- Desk Frame (Silver)
- Columnes d'elevació
- Travessa
- Peus d'escriptori
- Motor with Keypad
- Endoll
- Supporting Plates
- Vareta de transmissió
- Acoblament
- Llau clau
- Ganxos (x2)
- Assembly Hardware (Screws, Allen wrench)
Imatge: Més deview of the FLEXISPOT EN1 Electric Standing Desk, showing the assembled unit with a black desktop and silver frame, along with typical office items.
3. Muntatge i muntatge
Follow these steps carefully for proper assembly. It is recommended to have two people for certain steps.
- Insert the Coupling into the Motor: Carefully insert the coupling into the motor. Ensure correct orientation as shown in the assembly video.
- Insert the Motor and Right Column: Attach the motor assembly to the right lifting column.
- Install the Crossbeam: Connect the crossbeam between the two lifting columns. Align the protrusions with the holes and secure with screws.
- Install the Support Plates: Attach the support plates to the top of the lifting columns.
- Install the Desk Feet: Secure the desk feet to the bottom of the lifting columns.
- Adjust the Crossbeam: Loosen the crossbeam screws, adjust the width to fit the desktop, and then tighten.
- Install the Table Board: Carefully place the desktop onto the assembled frame. Secure it using the provided screws. Pre-drilling pilot holes may be necessary if not already present.
- Install the Transmission Rod: Insert the transmission rod, connecting the motor to the left lifting column. Tighten the nuts securely.
- Instal·leu el teclat: Mount the control keypad to the underside of the desktop using the provided screws.
- Install the Hooks: Attach the accessory hooks to the underside of the desktop as desired.
- Connectar els cables: Connect all motor and control panel cables to the power supply and then plug into a power outlet. Ensure cables are neatly managed to avoid snagging during height adjustments.
Image: Illustration of the desk components packaged in two separate boxes, one for the desktop and one for the frame, highlighting that they may arrive at different times.
4. Instruccions de funcionament
Your FLEXISPOT EN1 desk features an electric lift system for smooth height adjustments and memory presets for convenience.
Ajust d'alçada
Utilitza el Amunt (▲) i Avall (▼) arrow buttons on the control panel to manually adjust the desk height. The desk can be adjusted from a minimum height of 27.6 inches to a maximum height of 45.7 inches (excluding the 1-inch desktop thickness). The motor operates quietly, with noise levels below 50 dB.
Imatge: Detallada view of the programmable control panel, illustrating the buttons for height adjustment and memory presets.
Presets de memòria
The control panel features 4 memory preset buttons (1, 2, 3, 4) to store and recall your preferred sitting and standing heights.
- Ajusteu l'escriptori a l'alçada desitjada amb els botons Amunt/Avall.
- Press and hold one of the memory preset buttons (1, 2, 3, or 4) until the display flashes or a beep is heard. This saves the current height to that preset.
- To recall a saved height, simply press the corresponding memory preset button. The desk will automatically move to the saved position.
Video: FLEXISPOT Standing Desk in operation, demonstrating the smooth electric height adjustment and use of memory presets.
5. Manteniment
To ensure the longevity and optimal performance of your FLEXISPOT EN1 desk, follow these maintenance guidelines:
- Neteja: Netegeu l'escriptori i el marc amb un drap suauamp drap. Eviteu productes químics agressius o netejadors abrasius que puguin danyar l'acabat.
- Gestió de cables: Regularly check and organize cables to prevent tangling or damage, especially during height adjustments.
- Lubricació: The lifting mechanism is designed for maintenance-free operation. Do not attempt to lubricate internal components.
- Inspecció: Periodically inspect all screws and connections to ensure they are tight. Tighten any loose fasteners.
- Capacitat de pes: Do not exceed the maximum weight capacity of 176 lbs (80 kg) to prevent damage to the motor and frame.
6. Solució De Problemes
If you encounter any issues with your FLEXISPOT EN1 desk, refer to the following common troubleshooting steps:
| Problema | Causa possible | Solució |
|---|---|---|
| L'escriptori no es mou. | Power cable disconnected, motor cable disconnected, overload. | Comproveu totes les connexions dels cables. Reduïu el pes sobre l'escriptori. Reinicieu el sistema desendollant-lo durant 30 segons i tornant-lo a connectar. |
| L'escriptori es mou de manera irregular o fa sorolls estranys. | Loose screws, uneven weight distribution, internal mechanism issue. | Tighten all assembly screws. Redistribute weight evenly on the desktop. If the issue persists, contact customer support. |
| Els preajustaments de memòria no funcionen. | Els preajustos no s'han desat correctament. | Re-save your desired heights by adjusting the desk and then pressing and holding the preset button until confirmed. |
| L'escriptori s'atura a mig moviment. | Overload protection activated, obstruction. | Remove some weight from the desk. Check for any obstructions under or around the desk. Wait a few minutes for the motor to cool down if it was overloaded. |
If these steps do not resolve the issue, please contact FLEXISPOT customer support for further assistance.
7. Especificacions
| Característica | Detall |
|---|---|
| Marca | FLEXISPOT |
| Número de model | EC1S4824B |
| Dimensions del producte | 24 "P x 48" W x 47.6" H |
| Mida d'escriptori | 48" d'amplada x 24" de profunditat |
| Gruix de l'escriptori | 1 polzades |
| Material d'escriptori | Fusta d'enginyeria |
| Desktop Color | Negre |
| Material del marc | Acer d'aliatge |
| Color del marc | Plata |
| Interval d'ajust d'altura | 28.1" to 45.7" (without 1" desktop thickness) |
| Mecanisme d'elevació | Elèctric |
| Presets de memòria | 4 |
| Capacitat màxima de pes | 176 lliures (80 kg) |
| Nivell de soroll | Per sota dels 50 dB |
| Muntatge obligatori | Sí |
| UPC | 810072797476 |
8. Garantia i Suport
Informació de la garantia
This FLEXISPOT EN1 Electric Standing Desk comes with a Garantia limitada. Please refer to the warranty card included in your package or visit the official FLEXISPOT weblloc per obtenir els termes i condicions detallats.
Atenció al client
For any questions regarding assembly, operation, troubleshooting, or warranty claims, please contact FLEXISPOT customer support. Contact information can typically be found on the product packaging, the official FLEXISPOT weblloc web o a través del vostre distribuïdor.
A detailed sit stand desk installation video has been uploaded for reference. Assembly tools and detailed instructions are included in the package. Please do not hesitate to contact us with any questions during assembly and use.