Comgrow 3D Printer Filament Dryer Box Instruction Manual

Introducció

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Comgrow 3D Printer Filament Dryer Box. Designed to keep your 3D printing filaments dry and free from moisture, this device ensures optimal print quality and extends the lifespan of your materials. Please read this manual thoroughly before using the product.

Producte acabatview

The Comgrow Filament Dryer Box is an essential accessory for any 3D printing enthusiast, designed to combat the common issue of moisture absorption in filaments. It features internal heating and real-time monitoring to provide a stable, dry environment for your materials.

Característiques principals:

• Large Storage Volume: Accommodates 2 rolls of 1kg spools, compatible with 1.75mm/2.85mm PLA, ABS, and SILK filaments. Inner size: 9.29*6.49*9.13 inches (236*165*232mm).
• Eliminació d'humitat: Actively dries and removes moisture from filaments, preventing common printing issues like entanglement, clogging, poor adhesion, and layer migration.
• Monitorització en temps real: Features a 2-inch LCD screen displaying temperature and humidity.
• Configuració ajustable: Temperature range of 40°C to 50°C, with a drying time setting from 6 to 12 hours.
• Disseny segellat: Equipped with a silicone cable sheath and Teflon tube for smooth filament output, and a snap-button top cover for good sealing performance.

Figure 1: Comgrow 3D Printer Filament Dryer Box.

Figure 2: Large Capacity of the Filament Dryer Box.

Figure 3: Multiple Functions of the Filament Dryer.

Configuració

Follow these steps for the initial setup of your Comgrow Filament Dryer Box:

1. Install the Upper Cover: If the upper cover is not already installed, align it with the base and gently push the pins into place. Ensure it is securely attached.
2. Place Filaments: Unlock the snap button on the side, open the upper cover, and place your filament spools inside. The dryer can accommodate two spools with a diameter of ≤70mm or one bobbin with a width of ≤150mm.
3. Connectar l'alimentació: Open the sealing cap of the power jack located on the side of the unit and connect the provided power adapter.
4. Feed Filament (if printing directly): If you intend to print directly from the dryer, open the plug on the upper cover and pull the filament out through the outlet. Ensure the filament is placed counter-clockwise for better feeding. Close the upper cover securely.

Figure 4: Setup and Operation Steps.

Instruccions de funcionament

Once set up, operating the Comgrow Filament Dryer Box is straightforward:

1. Encès: Premeu el botó d'engegada (U symbol) to turn on the device. The screen will display the current temperature and humidity inside the box.
2. Temperatura establerta: Premeu el botó de funció (M) to enter temperature setting mode. Use the adjust button (three vertical lines) to cycle through temperature options (40°C, 45°C, 50°C).
3. Temps d'assecat definit: Premeu el botó de funció (M) again to enter time setting mode. Use the adjust button to set the desired drying duration (from 6 to 12 hours).
4. Començar l'assecat: After setting both temperature and time, press the function button (M) one more time to confirm and enter the