Manual d'usuari del comandament a distància sense fil Okin

1. Producte acabatview

This Okin Wireless Remote Control is designed as a replacement hand control for electric adjustable beds. It is specifically compatible with the RF.27.19.33 model and works seamlessly with various OKIN control boxes, including CB.13, CB.15, CB.23, CB.11, and CB.12.20 series. This remote provides intuitive control over your adjustable bed's functions, including position adjustments, massage features, and under-bed lighting.

Figure 1.1: Okin RF.27.19.33 Wireless Remote Control (Front)

Figure 1.2: Okin RF.27.19.33 Wireless Remote Control (Back)

Figure 1.3: Remote Control Label Detail (RF.27.19.33)

2. Configuració i emparellament

2.1 Instal·lació de la bateria

The remote control requires 2 AAA batteries (not included). To install:

1. Localitzeu el compartiment de la bateria a la part posterior del comandament a distància.
2. Feu lliscar la tapa de la bateria.
3. Introduïu 2 piles AAA, assegurant-vos de la polaritat correcta (+/-).
4. Tanqueu la tapa de la bateria amb seguretat.

2.2 Procés d'aparellament

Before using the remote, it must be paired with your adjustable bed's control box. Ensure your bed is plugged into a power outlet.

1. Step 1: Prepare the Control Box

   Locate the control box under your bed base. Double-click the code pairing button on the control box. The indicator light on the control box will turn blue, and the under-bed light (if present) will flash. This indicates the control box is in matching code mode.

   

   Figure 2.1: Control Box Pairing Button
2. Pas 2: vincula el comandament a distància

   Manteniu premut el botó PARELLA button on the remote control. The backlight of the remote will flash, indicating it is in matching mode. Continue to hold the button until the backlight stops flashing and remains constantly on (or the under-bed light stops flashing and goes out). Keep the remote within 1 meter of the control box during this process.

   

   Figure 2.2: Remote Control PAIR Button

NOTA:

• If code matching is not completed within the allotted time, please repeat the above actions until successful.
• Upon successful pairing, the control box LED will turn green. If it turns off, pairing failed, and you should retry.
• Avoid electronic interference during the pairing process.

3. Instruccions de funcionament

The Okin wireless remote control features an intuitive layout for easy operation of your adjustable bed. Key functions include:

• Position Adjustments: Independent control for head and foot sections (up/down arrows).
• Posicions de memòria: Buttons for pre-set positions (e.g., ZG for Zero Gravity, TV for TV position, M for memory).
• Funcions de massatge: Dedicated buttons for massage intensity and duration (10min, 20min, 30min).
• Under-Bed Light: Button to control the under-bed lighting.
• On/Off: Power button for the remote.
• Temporitzador: For setting sleep or massage timers.
• Mode: To cycle through different massage modes or other settings.

The ergonomic design ensures comfortable handling, and the wireless operation eliminates tangled wires.

4. Manteniment

• Cura de la bateria: Traieu les piles del comandament a distància si no el fareu servir durant un període prolongat per evitar fuites.
• Neteja: Clean the remote control with a soft, damp drap. No utilitzeu productes químics agressius, netejadors abrasius ni dissolvents, ja que poden danyar la superfície i els components interns.
• Emmagatzematge: Guardeu el comandament a distància en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
• Durabilitat: The remote is crafted from high-strength ABS plastic and is resistant to drops (tested up to 1.5m). However, avoid excessive force or impact.

5. Solució De Problemes

If problems persist after following these steps, please contact Okin customer support.

6. Especificacions

• Número de model: RF.27.19.33
• Compatibilitat: Okin control boxes (CB.13, CB.15, CB.23, CB.11, CB.12.20 series), Lucid L600 adjustable beds. Not compatible with other brands or non-specified models.
• Font d'alimentació: 2 piles AAA (no incloses)
• Material: Plàstic ABS d'alta resistència
• Color: Blanc
• Pes de l'article: Aproximadament 3.2 unces (90.7 grams)
• Dimensions del producte: Aproximadament 7 x 7 x 3 polzades (17.8 x 17.8 x 7.6 cm)
• Nombre màxim de dispositius admesos: 1
• Característica especial: Disseny ergonòmic
• País d'origen: Xina

7. Garantia i Suport

7.1 Informació de la garantia

Specific warranty details for this replacement remote control are typically provided at the point of purchase or with the original product documentation. Please refer to your purchase receipt or contact the seller for warranty terms and conditions.

7.2 Atenció al client

For any unresolved issues, technical assistance, or inquiries regarding your Okin Wireless Remote Control, please contact Okin customer support. You can often find contact information on the official Okin weblloc web o a través del venedor on vau comprar el producte.

Recursos en línia: For additional information and support, you may visit the official Okin store on Amazon: Botiga Okin