MOMIMO Bike Tail Light with Turn Signals

1. Introducció

Thank you for choosing the MOMIMO Bike Tail Light with Turn Signals. This device is designed to significantly enhance your visibility and safety while cycling, especially during night rides or in low-light conditions. Featuring ultra-bright LEDs, wireless remote control, and multiple lighting modes, it provides clear signaling capabilities for turns and warnings. Please read this manual thoroughly before installation and use to ensure proper operation and to maximize the lifespan of your product.

Image: The MOMIMO Bike Tail Light unit attached to a bike seat post, with its wireless remote control.

2. Informació de seguretat

• Assegureu-vos sempre que el llum posterior estigui ben muntat abans de conduir.
• Do not look directly into the light when it is on, as it may cause temporary vision impairment.
• While the light is IPX4 waterproof, avoid prolonged submersion in water.
• Regularly check the battery level and charge the device to ensure optimal performance.
• Use turn signals appropriately and in conjunction with hand signals where required by local traffic laws.

3. Producte acabatview

Components:

• Bike Tail Light Unit
• Comandament a distància sense fil
• Mounting Straps (for tail light and remote)
• Cable de càrrega USB

Imatge: Detallada view of the tail light unit, remote control, mounting accessories, and USB charging port.

Característiques principals:

• Ultra Bright LED: 100 lm output for excellent visibility.
• Comandament a distància sense fil: Easily activate turn signals and change light modes.
• Múltiples modes de llum: Red light (solid), Red light-flashing, All flashing (hazard).
• Senyals de gir: Dedicated left and right turn indicators.
• Disseny impermeable: IPX4 rated for reliable performance in rainy conditions.
• Bateria recarregable: Bateria integrada de 1000 mAh, que es carrega mitjançant USB.
• Wide Visibility: 270-degree visual range with adjustable angle.
• Altaveu: Integrated 120 decibel loudspeaker for audible alerts.

4. Configuració

4.1 Càrrega del llum posterior

Before first use, fully charge the tail light unit. Connect the supplied USB charging cable to the charging port on the back of the tail light and plug the other end into a USB power source (e.g., computer, wall adapter, power bank). The indicator light will show charging status.

4.2 Installing the Tail Light Unit

1. Select a suitable position on your bike's seat post.
2. Attach the mounting bracket to the seat post using the provided rubber strap. Ensure it is tight and stable.
3. Slide the tail light unit onto the mounting bracket until it clicks securely into place.
4. Adjust the angle of the tail light for optimal visibility (270-degree range).

Image: Step-by-step guide for attaching the tail light to the seat post.

4.3 Instal·lació del comandament a distància sense fil

1. Choose a convenient location on your bike's handlebar, within easy reach of your thumb.
2. Use the smaller rubber strap to securely attach the remote control to the handlebar.
3. Ensure the remote is stable and does not interfere with braking or gear shifting.

4.4 Emparellament (si cal)

The tail light and remote control are typically pre-paired from the factory. If they do not respond to each other, ensure both devices are powered on. Refer to the user manual for specific pairing instructions if needed, though the unboxing video suggests they are ready to use out of the box after removing the battery protector from the remote.

5. Instruccions de funcionament

5.1 Encès/Apagat

Press the main power button on the tail light unit to turn it on or off. The remote control will automatically connect when the tail light is on.

5.2 Switching Light Modes

The tail light offers three primary modes for enhanced visibility:

• Llum vermella (sòlida): Constant red illumination.
• Red Light-Flashing: Red light flashes intermittently.
• All Flashing (Hazard): All LEDs (red and amber) flash simultaneously for maximum attention.

Use the central button on the remote control to cycle through these modes.

Image: Visual representation of the tail light's different illumination patterns.

5.3 Activating Turn Signals

The remote control has dedicated buttons for left and right turn signals:

• Premeu el botó Fletxa esquerra button to activate the left turn signal. The left amber LEDs on the tail light will flash, accompanied by an audible beep.
• Premeu el botó Fletxa dreta button to activate the right turn signal. The right amber LEDs on the tail light will flash, accompanied by an audible beep.

Press the same arrow button again to deactivate the turn signal.

5.4 Using the Loudspeaker (Horn)

The tail light features a 120 decibel loudspeaker for alerting pedestrians or other cyclists. This is typically integrated with the turn signal activation, providing an audible cue when signaling a turn.

Image: A cyclist on a road at night, demonstrating the visibility and audible alert of the tail light.

6. Manteniment

6.1 Càrrega del llum posterior

Charge the tail light regularly to ensure it is ready for use. A full charge typically takes approximately 2 hours. The light can be charged via a power bank, wall charger, laptop/PC, or car charger.

Image: Various methods for charging the tail light unit.

6.2 Neteja

Netegeu el llum posterior i el comandament a distància amb un drap suau.amp drap per eliminar la brutícia i les restes. No utilitzeu productes de neteja abrasius ni dissolvents.

6.3 Impermeabilització

The device is IPX4 waterproof, meaning it is resistant to splashing water from any direction. While it can withstand rain, avoid submerging it in water for extended periods.

Image: The tail light being tested under splashing water, demonstrating its IPX4 waterproof rating.

7. Solució De Problemes

• La llum no s'encén: Assegureu-vos que la bateria estigui carregada. Premeu el botó d'encesa amb fermesa.
• El comandament a distància no respon: Check if the remote's battery is functional (remove plastic protector if new). Ensure the tail light is powered on. Re-pair if necessary (refer to manual for specific steps).
• Turn signals not working: Verify the remote is paired and the tail light is on. Check for any obstructions.
• La bateria no es carrega: Ensure the USB cable and power source are working correctly. Check the charging port for debris.

8. Especificacions

Image: Diagram showing the dimensions of the tail light and remote control.

9. Garantia i assistència

MOMIMO products are manufactured to the highest quality standards. If you encounter any issues or have questions regarding your Bike Tail Light with Turn Signals, please contact our customer support. We are committed to providing excellent service and ensuring your satisfaction.

For warranty information and support, please refer to the contact details provided on the product packaging or our official weblloc.