DATOUBOSS 2000W Shortwave Infrared Paint Curing Lamp (Model DA-03) Instruction Manual

Introducció

This manual provides essential information for the safe and effective operation of your DATOUBOSS 2000W Shortwave Infrared Paint Curing Lamp, Model DA-03. This device is designed for efficient paint drying and curing in various applications, including automotive body repair, furniture finishing, and other industrial uses. Its shortwave infrared technology ensures deep penetration and rapid drying from the inside out, resulting in a high-quality finish and strong coating adhesion.

Informació de seguretat

ADVERTIMENT: Llegiu tots els avisos i instruccions de seguretat abans d'utilitzar aquest producte. Si no seguiu els avisos i les instruccions, podeu patir descàrregues elèctriques, incendis i/o lesions greus.

• Seguretat elèctrica: Ensure the power supply matches the lamp's voltage (110V). Do not operate with damaged cords or plugs. Always connect to a grounded outlet.
• Risc de calor: El lamp generates intense heat. Avoid direct contact with the heating elements and metal housing during and immediately after operation. Allow sufficient time for cooling.
• Protecció ocular: Always wear appropriate eye protection when operating the lamp to shield against infrared radiation.
• Ventilació: Utilitzeu la lamp in a well-ventilated area to prevent the buildup of fumes from paints and solvents.
• Materials inflamables: Mantingueu la lamp away from flammable materials, liquids, and gases.
• Nens i animals de companyia: Mantingueu els nens i les mascotes lluny de la zona d'operacions.
• Tractament adequat: Use the designated handle for carrying. Do not use the power cord to move the lamp.

Característiques del producte

• Shortwave Infrared Heating: High luminous efficiency and strong penetrating power for drying paint from the inside out, reducing wrinkles and improving adhesion.
• Funció de cronometratge: Adjustable timer from 1 to 90 minutes with automatic shutdown for convenience and safety.
• Optimal Curing Area: Curing area of 650*500mm (25.6*19.7 in) with an operating temperature of 0-200 ℃ (0-392 ℉). Features a high reflectivity reflector for uniform heat distribution.
• High Heat Dissipation: Constructed from aluminum alloy with a perforated design for enhanced heat dissipation and extended service life.
• Aplicació versàtil: Suitable for auto spray paint rooms, local paint drying, putty drying, engine drying, adhesive strip removal, and preheating before spraying.

Especificacions

Configuració

Desembalatge i inspecció inicial

Carefully remove all components from the packaging. Inspect the lamp and accessories for any signs of damage.

Descripció: This image shows the DATOUBOSS Infrared Paint Curing Lamp being unboxed, revealing the main unit and accessories.

Col·locació del mànec

El lamp comes with a detachable handle for handheld operation. Align the handle with the designated mounting points on the lamp's body and secure it using the provided screws.

Descripció: This video demonstrates the disassembly and assembly process of the car baking lamp, including attaching the handle.

Descripció: This image highlights the removable handle and the 0-90 minute intelligent timer switch on the lamp.

Assembling the Stand (Optional)

Si s'utilitza la lamp with a stand (sold separately), assemble the stand according to its instructions. Ensure all legs are securely extended and locked into place for stability.

Descripció: This video provides instructions on how to assemble and wire the infrared paint curing lamp, including stand setup.

Descripció: The image shows the infrared paint curing lamp installed on a configurable lifting bracket stand, positioned next to a car for paint curing.

Substitució de bombetes

To replace a halogen bulb, ensure the unit is unplugged and completely cool. Carefully remove the protective grille and gently pull out the old bulb. Insert the new bulb, ensuring it is securely seated in the sockets. Avoid touching the glass of the new bulb with bare hands.

Descripció: This video illustrates how to install the baking infrared paint curing lamp, which includes steps for bulb handling.

Instruccions de funcionament

Connexió d'alimentació

Connecteu la lamp's power cord to a standard 110V grounded electrical outlet.

Descripció: This image displays the 110V/2000W US plug, emphasizing its strong connection, long service life, and standard interface.

Configuració del temporitzador

Use the timing knob to set the desired curing time, ranging from 1 to 90 minutes. The lamp will automatically shut off once the set time expires.

Descripció: Un primer pla view of the timer switch, showing the 0-90 minute adjustment range and the automatic stop feature.

Col·locació de la Lamp

Col·loca la lamp approximately 20-30 cm (8-12 inches) from the surface to be cured. Adjust the angle to ensure even heat distribution over the target area.

Descripció: This video demonstrates the proper use of the infrared paint lamp for curing, showing how to position it relative to the painted surface.

Procés de curat

The shortwave infrared technology penetrates the paint layer, drying it from the inside out. This method significantly reduces drying time and improves the quality and durability of the paint finish.

Descripció: A diagram explaining how shortwave infrared light penetrates paint layers (medium coating, paint, primer, sheet metal) to dry from the inside out.

Descripció: This image shows the infrared paint curing lamp in action, illustrating its fast and powerful penetration for drying different paint layers like rust-resistant primer, putty, midway primer, topcoat, and varnish with estimated drying times.

Descripció: A visual comparison of shortwave, mid-wave, and far-wave infrared penetration into painted surfaces and car bodies, highlighting the deeper penetration of shortwave.

Descripció: This image compares traditional paint drying time (45 minutes) with shortwave drying time (15 minutes), showing a significant reduction in time and increased efficiency.

Manteniment

• Neteja: Assegureu-vos que lamp is unplugged and cool before cleaning. Use a soft, dry cloth to wipe down the exterior. Do not use abrasive cleaners or solvents.
• Inspecció de bombetes: Regularly inspect the halogen bulbs for any signs of damage or wear. Replace bulbs as needed following the bulb replacement instructions.
• Emmagatzematge: Guarda la lamp in a dry, clean environment when not in use.

Resolució de problemes

• Lamp No s'encén:
  • Comproveu si el cable d'alimentació està ben connectat a una presa de corrent de 110 V que funcioni.
  • Verify the timer is set to a duration greater than zero.
  • Inspect the power switch for proper engagement.
  • Check for blown fuses or tripped circuit breakers in your electrical system.
• Curat desigual:
  • Assegureu-vos que lamp is positioned at the recommended distance (20-30 cm) from the surface.
  • Ajusteu la lamp's angle to ensure even coverage of the curing area.
  • Check if any foreign objects are obstructing the infrared emission.
• Sobreescalfament:
  • Assegureu-vos que lamp s'utilitza en una zona ben ventilada.
  • Do not block the heat dissipation holes on the lampel cos de.
  • Permet la lamp refredar si fa massa calor.

Garantia i Suport

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official DATOUBOSS weblloc web. Conserveu el rebut de compra com a comprovant de compra.

Vídeos addicionals de productes

Using for Infrared Paint Lamp

Descripció: This video demonstrates the practical application of the infrared paint lamp per a diferents tasques.

Pintura infraroja per coure Lamp in Use

Descripció: Una projecció de vídeoasing the infrared paint baking lamp during operation, highlighting its effectiveness.

Infrared Paint Curing Dryer Short Wave Infrared Drying Lamp

Descripció: This video provides a demonstration of the shortwave infrared drying lamp in action, illustrating its quick drying capabilities.

Infrared Paint Curing Lamp Acabatview

Descripció: Un final integralview video of the infrared paint curing lamp, detailing its features and benefits.