1. Instruccions de seguretat importants
Llegiu totes les advertències, instruccions, il·lustracions i especificacions de seguretat proporcionades amb aquesta eina elèctrica. L'incompliment de totes les instruccions que s'indiquen a continuació pot provocar descàrregues elèctriques, incendis i/o lesions greus. Deseu tots els avisos i instruccions per a una referència futura.
Seguretat general
- Mantenir la zona de treball neta i ben il·luminada. Les zones desordenades o fosques conviden a accidents.
- No utilitzeu eines elèctriques en atmosferes explosives, com en presència de líquids, gasos o pols inflamables. Les eines elèctriques generen espurnes que poden encendre la pols o els fums.
- Mantingueu els nens i els espectadors allunyats mentre opera una eina elèctrica. Les distraccions poden fer que perdis el control.
Seguretat elèctrica
- Eviteu el contacte corporal amb superfícies posades a terra, com ara canonades, radiadors, cuines i neveres. Hi ha un major risc de descàrrega elèctrica si el vostre cos està connectat a terra o a terra.
- No exposar les eines elèctriques a la pluja o a condicions humides. L'entrada d'aigua en una eina elèctrica augmentarà el risc de descàrrega elèctrica.
Seguretat personal
- Utilitzeu sempre protecció ocular. Use appropriate personal protective equipment such as safety glasses, hearing protection, and heavy-duty gloves.
- Vesteix-te correctament. No porteu roba solta ni joies. Mantingueu els cabells i la roba allunyats de les parts mòbils.
- Estigueu alerta, observeu el que feu i feu servir el sentit comú when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication.
Seguretat específica del tallabardisses
- Mantingueu totes les parts del cos allunyades de la fulla de tall. No retireu material tallat ni subjecteu el material que s'ha de tallar quan les fulles estiguin en moviment. Assegureu-vos que l'interruptor estigui apagat quan traieu material encallat.
- Porteu el tallabarres per la nansa amb la fulla del tallador parada. Quan transporteu o emmagatzemeu el tallabardos, col·loqueu sempre la coberta de la fulla.
- Subjecteu l'eina elèctrica només per les superfícies d'agafada aïllades, because the cutter blade may contact hidden wiring.
- Before use, inspect the hedge for foreign objects such as wires or cables.
2. Producte acabatview
The DEWINNER Cordless Telescopic Hedge Trimmer is designed for efficient and safe trimming of hedges and shrubs, especially at height. It features an extendable pole and an adjustable cutting head for versatility.
Components

- Dual Action Laser Cut Blade: Provides clean and precise cuts.
- Ventilació: Ensures proper motor cooling during operation.
- Maneta giratòria: Allows for adjustment of the cutting head angle.
- Foam for Hand Hold: Proporciona una subjecció còmoda i segura.
- Split Shaft Design: Enables extension of the tool for long-reach applications.
- 20V 2000mAh Lithium Battery: Powers the hedge trimmer.
- Instant Electric Start with Safety Button: For quick and safe activation.

The double safety switch design requires both the ON/OFF switch and the safety button to be engaged for operation, increasing security and preventing accidental contact.
3. Configuració
3.1 Assembly of the Telescopic Pole
- Align the extension rod with the main unit.
- Push the rod firmly into the connection point until it clicks securely into place.
- Ensure the connection is tight before use.

3.2 Instal·lació i càrrega de la bateria
- Insert the 20V 2.0Ah Lithium Battery into the battery slot on the handle until it locks.
- To charge, remove the battery from the tool.
- Connect the charger to a power outlet and then connect the battery to the charger.
- Allow approximately 60 minutes for a full charge. The charger indicator light will show charging status.
4. Instruccions de funcionament
4.1 Inici i aturada
- Assegureu-vos que la bateria estigui completament carregada i instal·lada correctament.
- Press and hold the safety button, then squeeze the ON/OFF switch to start the trimmer.
- Release the ON/OFF switch to stop the trimmer.
4.2 Adjusting the Cutting Head Angle
The cutting head can be adjusted up to 105° to suit various trimming angles, including tops of hedges, sides, and ground cover.
- With the trimmer off, locate the rotating knob near the cutting head.
- Press the knob and adjust the head to the desired angle.
- Release the knob to lock the head in position.

4.3 Using the Telescopic Function
The split shaft design allows the trimmer to extend, providing a maximum height of approximately 2.40 meters (94.5 inches) for reaching high hedges.
- Loosen the locking mechanism on the telescopic pole.
- Esteneu el pal a la longitud desitjada.
- Securely tighten the locking mechanism before operation.


4.4 Tècniques de retall
- For vertical surfaces: Use a sweeping motion, moving the trimmer from bottom to top.
- For horizontal surfaces: Hold the trimmer at a slight angle and sweep across the top of the hedge.
- Avoid overreaching. Maintain a balanced stance and use the telescopic function to reach higher areas safely.
5. Manteniment
5.1 Cura de la fulla
The trimmer is equipped with rust-proof, laser-cut blades made from alloy steel, designed for sharp, high hardness, and wear resistance.

- Neteja: After each use, clean the blades with a stiff brush to remove sap and debris.
- Lubricació: Apply a light machine oil or blade lubricant to the blades regularly to prevent rust and ensure smooth operation.
- Afilat: If blades become dull, have them professionally sharpened or replace them. Always ensure the tool is disconnected from the battery before any maintenance.
5.2 Neteja i emmagatzematge generals
- Wipe down the tool's body with a damp tela. No utilitzeu productes químics durs.
- Guardeu el tallabarders en un lloc sec i segur, fora de l'abast dels nens.
- Always attach the blade cover before storing or transporting the tool.
- Guardeu les piles en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
6. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La retalladora no s'engega. | Battery not charged or improperly installed. Safety switch not engaged. | Ensure battery is fully charged and correctly inserted. Press the safety button before squeezing the trigger. |
| Rendiment de tall reduït. | Dull or dirty blades. Overgrown branches. | Clean and lubricate blades. Sharpen or replace blades if necessary. Avoid cutting branches thicker than 1.6 cm. |
| L'eina s'atura durant el funcionament. | Battery low. Overload protection activated. | Recharge the battery. Reduce the load on the tool; avoid forcing it through thick material. |
| El pal telescòpic no s'estén/retrau suaument. | Locking mechanism jammed or dirty. | Clean the locking mechanism. Apply a small amount of lubricant if needed. Ensure the mechanism is fully disengaged before adjusting. |
7. Especificacions
| Característica | Detall |
|---|---|
| Marca | DESGANYADOR |
| Número de model | DE2286-2 |
| Font d'alimentació | Funciona amb bateria (20 V) |
| Capacitat de la bateria | 2 x 2.0 Ah Lithium-ion |
| Longitud de la fulla | 45 cm (18.1 polzades) |
| Amplada de tall (màx.) | 1.6 cm (0.63 polzades) |
| Velocitat sense càrrega | 1200 rpm |
| Dimensions del producte (L x A x A) | 102L x 18W x 16H cm |
| Pes de l'article | 4.5 kg |
| Material de la fulla | Acer d'aliatge |
| Adjustable Head Angle | Fins a 105° |
| Max Telescopic Height | Aprox. 2.40 m (94.5 polzades) |
| UPC | 761064719450 |
8. Garantia i Suport
For warranty information, technical support, or to purchase replacement parts, please refer to the warranty card included with your product or visit the official DEWINNER weblloc web. Conserveu el rebut de compra com a comprovant de compra per a qualsevol reclamació de garantia.