AVI-8 Hawker Hurricane AV-4088 Dual Time Pilot Watch Instruction Manual

Introducció

This manual provides essential instructions for the setup, operation, and maintenance of your AVI-8 Hawker Hurricane AV-4088 Dual Time Pilot Watch. Please read these instructions carefully to ensure proper use and longevity of your timepiece.

Producte acabatview

The AVI-8 Hawker Hurricane AV-4088 is a men's pilot watch featuring a Japanese Quartz Dual Time and Date function. It is designed with a 43.5mm stainless steel case and a genuine leather strap. The watch incorporates a mineral lens with anti-reflective coating and offers water resistance up to 50 meters.

Característiques principals:

• Moviment de quars japonès
• Dual Time Zone Display
• Funció de data
• 43.5mm Stainless Steel Case
• Corretja de cuir genuí
• Mineral Lens with Anti-Reflective Coating
• Resistència a l'aigua de 50 m

Instruccions de configuració

1. Initial Activation and Time Setting

Upon receiving your watch, a small plastic tab may be present under the crown to prevent battery drain. Gently remove this tab.

1. Pull the crown (located on the right side of the watch case) out to position '2'.
2. Rotate the crown to set the hour and minute hands to the desired local time. Observe the 24-hour sub-dial to distinguish between AM and PM.
3. Once the time is set, push the crown back into position '1' to engage the movement.

2. Setting Dual Time Zones

The watch features two sub-dials for dual time zones, labeled 'ZONE 1' and 'ZONE 2'.

• The dual time zones are typically linked to the main time setting. Adjusting the main time will automatically update the dual time sub-dials.
• Consult the specific movement instructions for fine-tuning or independent adjustment of the dual time zones if applicable.

3. Ajust de data

The date window is located at the 6 o'clock position.

1. Pull the crown out to position '1' (halfway).
2. Gireu la corona per ajustar la data.
3. Once the correct date is displayed, push the crown back into its original position.

Funcionament del cronògraf

La funció de cronògraf permet una cronometratge precisa dels esdeveniments.

1. Inici del cronògraf: Press the top pusher button (B) to start the chronograph. The large central second hand will begin to move, along with the minute sub-dial.
2. Stopping the Chronograph: Press the top pusher button (B) again to stop the chronograph. The hands will hold their position, indicating the elapsed time.
3. Reinicialització del cronògraf: After stopping, press the bottom pusher button (E) to reset the chronograph. All chronograph hands will return to their zero positions.

Manteniment i cura

Atenció general:

• Netegeu el rellotge regularment amb un drap suau i sec.
• Eviteu exposar el rellotge a temperatures extremes, a la llum solar directa durant períodes prolongats o a camps magnètics forts.
• The leather strap should be kept dry and cleaned with appropriate leather care products to maintain its condition.

Resistència a l'aigua:

This watch is water-resistant up to 50 meters (5 ATM). This means it is suitable for short periods of recreational swimming, but not for diving or prolonged water immersion. Do not operate the crown or pushers when the watch is wet or submerged.

Substitució de la bateria:

The watch uses 1 product-specific battery. When the watch stops or the second hand begins to jump erratically, it indicates a low battery. Battery replacement should be performed by a qualified watch technician to ensure water resistance is maintained.

Resolució de problemes

Les agulles del cronògraf no es reinicien a zero:

If the chronograph hands do not return to the 12 o'clock (zero) position after resetting, they may need calibration. This can occur after a battery change or impact.

1. Pull the crown out to position '2'.
2. Press and hold the top pusher button (B). The chronograph second hand will start to advance.
3. Release the button when the chronograph second hand aligns perfectly with the 12 o'clock mark.
4. If the minute sub-dial also needs adjustment, press the bottom pusher button (E) repeatedly until it aligns to zero.
5. Once all chronograph hands are aligned, push the crown back into position '1'.

Mira No Corrent:

• Comproveu si la corona està completament empenta cap a dins.
• The battery may need replacement. Consult a professional watch technician.

Especificacions

Garantia i Suport

Your AVI-8 watch is warranted against any manufacturing defect for a period of twenty-four (24) months from the date of purchase. For warranty claims or technical support, please refer to the official AVI-8 weblloc web o poseu-vos en contacte amb el vostre distribuïdor autoritzat.