Transformers Studio Series 81 Deluxe Class Wheeljack Action Figure Instruction Manual

1. Producte acabatview

The Transformers Studio Series 81 Deluxe Class Wheeljack figure brings the iconic character from the Transformers movie universe to your collection. Inspired by the Cybertron Falls scene in Transformers: Bumblebee, this figure accurately reflects Wheeljack's appearance and features. It converts between robot mode and Cybertronian racecar mode, offering dynamic display and play options.

Image 1.1: Wheeljack figure in robot mode, equipped with blaster accessory.

This collectible action figure is designed for fans aged 8 and up, featuring detailed movie-inspired deco and articulation for various poses. The package includes a removable backdrop to recreate the Cybertron Falls scene.

2. Primers passos

2.1 Desembalatge i inspecció inicial

Carefully remove the figure and its accessories from the packaging. Inspect all components for any damage or missing parts. The package includes the Wheeljack figure and a blaster accessory.

2.2 Removable Backdrop

The packaging features a removable backdrop designed to enhance display. Detach the backdrop carefully from the packaging to use it as a display base for your Wheeljack figure, recreating the Cybertron Falls scene.

Image 2.1: Wheeljack figure displayed with the removable Cybertron Falls backdrop.

3. Transformation Guide (Robot to Cybertronian Racecar Mode)

The Wheeljack figure converts between robot and Cybertronian racecar modes in 31 steps. Follow these general instructions for transformation. Refer to the included physical instructions for detailed step-by-step visuals.

3.1 Robot Mode

Image 3.1: Wheeljack in robot mode, ready for transformation.

1. Elimina els accessoris: Detach the blaster accessory from the figure's hand.
2. Position Limbs: Straighten the figure's arms and legs. Ensure all joints are aligned.
3. Fold and Collapse: Begin folding the robot's limbs and body panels inward, following the natural articulation points. The arms typically fold into the side or underside of the vehicle, and the legs form the rear.
4. Rotate and Align: Rotate the waist and torso sections as needed to align with the vehicle's chassis.
5. Form Vehicle Shell: Bring together the various panels and sections to form the outer shell of the Cybertronian racecar. Ensure all tabs and slots click securely into place.
6. Attach Blaster (Optional): The blaster accessory can be attached to the vehicle mode for enhanced play or display.

3.2 Cybertronian Racecar Mode

Once transformed, Wheeljack takes on his sleek Cybertronian racecar form. Ensure all panels are flush and securely connected for a complete vehicle mode.

Image 3.2: Wheeljack in Cybertronian racecar mode.

Image 3.3: Wheeljack in Cybertronian racecar mode with the blaster accessory mounted.

To convert back to robot mode, reverse the steps, carefully unfolding and extending the parts until the robot form is achieved.

4. Cura i Manteniment

• Neteja: Feu servir un drap suau i sec per netejar suaument la pols de la figura. Eviteu utilitzar productes químics agressius o materials abrasius, ja que poden danyar la pintura o el plàstic.
• Emmagatzematge: Store the figure in a cool, dry place away from direct sunlight and extreme temperatures to prevent discoloration or material degradation.
• Manipulació: Handle the figure with care, especially during transformation, to avoid stressing joints or breaking small parts.

5. Solució De Problemes

• Dificultat de transformació: If parts are stiff or difficult to move, apply gentle, even pressure. Do not force parts, as this can cause breakage. Ensure you are following the correct sequence of steps.
• Articulacions soltes: Over time, some joints may become loose. This is typical with articulated figures. For minor looseness, a small amount of clear nail polish or a specialized joint tightener can be applied to the joint and allowed to dry.
• Peces no alineades: Double-check that all previous steps in the transformation are correctly executed. Sometimes a misaligned panel or limb can prevent subsequent steps from locking into place.

6. Especificacions del producte

Image 6.1: Dimensions of the Wheeljack figure in robot mode.

7. Informació de seguretat

• Edat recomanada: This product is recommended for ages 8 and up. It contains small parts that may pose a choking hazard for younger children.
• Peces petites: Keep all small accessories, such as the blaster, away from children under 3 years of age.
• Supervisió: Adult supervision is recommended during play, especially during initial transformations.
• Ús previst: This product is an action figure and collectible toy. It is not intended for rough play or use as a weapon.

8. Garantia i Suport

For any questions regarding your Transformers Studio Series 81 Deluxe Class Wheeljack figure, or for information on warranty and replacement parts, please contact Hasbro customer service. Refer to the contact information provided on the product packaging or visit the official Hasbro weblloc per obtenir detalls de suport.

Fabricant: Hasbro