Wisoqu AT5-2200X Variable Frequency Drive User Manual

1. Introducció

The Wisoqu AT5-2200X Variable Frequency Drive (VFD) is an advanced motor speed controller designed to convert single-phase 110VAC input into 3-phase 220V output, suitable for 3-phase motors. This device offers high torque and wide speed regulation capabilities, enabling precise control over motor start, stop, speed adjustment, and forward/reverse rotation to meet diverse production and equipment requirements.

Equipped with a clear digital display for convenient parameter setting and monitoring, the AT5-2200X also integrates multiple protection features including overcurrent, overvoltage, minvartage, module failure, overheating, and short-circuit protection, ensuring reliable and safe operation with low electromagnetic interference.

2. Precaucions de seguretat

Llegiu atentament totes les instruccions abans de la instal·lació, el funcionament o el manteniment. Si no seguiu aquestes instruccions, podeu patir lesions greus o danys a l'equip.

• Risc elèctric: Ensure power is disconnected before performing any wiring or maintenance. Only qualified personnel should install and service this equipment.
• Posada a terra: El variador de freqüència (VFD) ha d'estar correctament connectat a terra per evitar descàrregues elèctriques.
• Voltage Compatibilitat: Comproveu que l'entrada voltage (110VAC) and output voltage (220V) are compatible with your motor and power supply.
• Medi ambient: Do not install the VFD in environments with explosive gases, excessive dust, or high humidity. Ensure adequate ventilation to prevent overheating.
• Components interns: Do not open the VFD casing unless specifically instructed for maintenance. High voltage is present inside, even after power is disconnected.
• Compatibilitat del motor: This inverter is designed for 3-phase 220V motors. Confirm your motor's specifications before connection.

3. Producte acabatview

The Wisoqu AT5-2200X VFD features a compact design with a user-friendly control panel and efficient cooling mechanisms.

3.1. Funcions del tauler de control

• Pantalla digital: Shows current operating frequency, parameters, and error codes.
• Botó EXECUTAR: Inicia el funcionament del motor.
• Botó STOP/RESET: Stops motor operation or clears error states.
• FWD/REV Buttons: Controls forward and reverse rotation direction.
• PROG/FUNC/DATA Buttons: Used for navigating menus, selecting functions, and entering/saving data.
• Perilla d'ajust de velocitat: Rotary knob for precise frequency/speed control.

3.2. Producte acabatview Vídeo

4. Configuració

4.1. Instruccions de cablejat

Proper wiring is critical for safe and effective operation. Refer to the wiring diagram provided with your unit and consult a qualified electrician if unsure.

1. Power Input (L/N): Connect the single-phase 110VAC power supply to the designated input terminals (typically labeled L and N).
2. Motor Output (U/V/W): Connect the three-phase 220V motor to the output terminals (typically labeled U, V, W). Ensure correct phase sequence for desired rotation direction.
3. Posada a terra: Connect the VFD's ground terminal to a reliable earth ground.
4. Terminals de control: For external control (e.g., start/stop switch, potentiometer), connect wires to the appropriate control terminals (e.g., COM, S1, AI, 10V, ACM).

4.2. Wiring and Basic Operation Videos

5. Instruccions de funcionament

5.1. Funcionament bàsic

1. Encès: Connecteu l'alimentació al variador de freqüència. La pantalla digital s'il·luminarà.
2. Motor d'arrencada: Premeu el botó CÓRRER botó per engegar el motor.
3. Ajustar velocitat: Rotate the speed adjustment knob to increase or decrease the motor's operating frequency.
4. Canvi de direcció: Utilitza el FWD i REV buttons to switch between forward and reverse rotation.
5. Atura el motor: Premeu el botó STOP/RESET botó per aturar el motor.

5.2. External Control Examples

6. Manteniment

Un manteniment regular garanteix la longevitat i el rendiment òptim del vostre variador de freqüència.

• Neteja: Periodically clean the VFD's exterior, especially the ventilation openings, to prevent dust accumulation which can lead to overheating. Use a soft, dry cloth. Do not use liquid cleaners.
• Inspecció: Regularly inspect all wiring connections for tightness and signs of wear or damage. Check for any unusual noises or odors during operation.
• Medi ambient: Assegureu-vos que l'entorn de funcionament es mantingui dins dels rangs de temperatura i humitat especificats.
• Ventiladors de refrigeració: Check cooling fans for proper operation and clear any obstructions.

7. Solució De Problemes

This section addresses common issues you might encounter with your VFD.

7.1. Problemes comuns i solucions

• El motor no arrenca:
  • Comproveu les connexions de la font d'alimentació.
  • Verify motor wiring (U, V, W) is correct and secure.
  • Assegureu-vos que el VFD estigui en mode RUN.
  • Check for any active error codes on the digital display and refer to the manual's error code section (if available) for specific remedies.
• Motor Running Erratically or at Incorrect Speed:
  • Check the speed adjustment knob setting.
  • Verify control signal connections (if using external control).
  • Ensure motor parameters are correctly set in the VFD.
• Overcurrent/Overload Error:
  • Check for mechanical overload on the motor.
  • Verify motor current ratings match VFD settings.
  • Inspect motor and wiring for short circuits or damage.
• Overvoltage/Undervoltage Error:
  • Comproveu la font d'alimentació d'entrada voltage for stability and correct value (110VAC).
  • Ensure proper braking resistor (if used) is connected and functioning.

For persistent issues or specific error codes not listed, please contact Wisoqu customer support.

8. Especificacions

9. Garantia i Suport

For warranty information, technical support, or service inquiries regarding your Wisoqu AT5-2200X Variable Frequency Drive, please refer to the documentation included with your purchase or contact the manufacturer directly through their official weblloc web o canals d'atenció al client. Conserveu el rebut de compra com a comprovant de compra per a qualsevol reclamació de garantia.