1. Informació de seguretat
Please read these instructions carefully before installation and retain them for future reference. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause personal injury or property damage.
- Seguretat elèctrica: Always turn off the power at the circuit breaker or fuse box before installing, servicing, or replacing any part of the fixture. Ensure all electrical connections comply with local codes and ordinances. If you are unsure about wiring, consult a qualified electrician.
- Valoració del producte: This fixture is ETL and UL Listed, ensuring it meets rigorous safety and quality standards for wet locations.
- Compatibilitat amb bombetes: Use only E26 base bulbs with a maximum wattage de 40 W. Superant la potència màximatagPot causar sobreescalfament i danys a l'aparell o crear un perill d'incendi.
- Manipulació: Handle the fixture and glass components with care to prevent breakage.
2. Configuració i instal·lació
The LEONLITE Bulkhead Light is designed for easy installation on walls or ceilings. Follow these steps for proper setup:
- Prepareu la superfície de muntatge: Ensure the power is off at the circuit breaker. Secure the mounting bracket (not included) to your existing J-box.
- Connecteu el cablejat: Connect the fixture's wires to your household wiring using the provided waterproof wire nuts. Ensure proper polarity (live to live, neutral to neutral, ground to ground).
- Secure the Fixture Base: Pass the nipple through the hole and metal ring, then screw the cap to secure the fixture base to the mounting bracket.
- Instal·leu la bombeta: Carefully screw an E26 base bulb (max 40W, not included) into the socket.
- Adjunta Lampshade and Cover: Place the frosted glass lampshade onto the fixture base, ensuring the rubber sealant is properly seated for a waterproof seal. Then, screw the rugged protective cover back onto the fixture.
Guia de vídeo d'instal·lació
This video from Torchstar (the seller) provides a visual guide to the installation process of the LEONLITE Bulkhead Light, demonstrating how to mount the fixture and connect the components.
3. Instruccions de funcionament
Operating your LEONLITE Bulkhead Light is straightforward:
- Encès/apagat: Control the light using your existing wall switch or the connected control method (e.g., app, push button) as per your electrical setup.
- Difusió de la llum: The frosted glass lampshade provides a soft, diffused light, ideal for creating a welcoming ambiance without harsh glare.
4. Manteniment
To ensure the longevity and optimal performance of your bulkhead light, follow these maintenance guidelines:
- Neteja: Disconnect power before cleaning. Wipe the exterior of the fixture with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as they may damage the finish or glass.
- Substitució de bombetes: Ensure power is off. Carefully unscrew the protective cover and frosted glass lampshade. Unscrew the old E26 bulb and replace it with a new E26 bulb (max 40W). Reassemble the lampshade and cover, ensuring the waterproof seal is intact.
- Inspecció: Inspeccioneu periòdicament l'aparell per detectar qualsevol signe de desgast, danys o connexions soltes. Solucioneu qualsevol problema immediatament.
5. Solució De Problemes
If you encounter issues with your LEONLITE Bulkhead Light, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s'encén | No power, loose wiring, faulty bulb, faulty switch. | Check circuit breaker/fuse. Verify wiring connections. Replace bulb. Test switch. |
| La llum és tènue o parpelleja | Bombeta incorrectatage, loose bulb, faulty bulb. | Ensure bulb is max 40W. Tighten bulb. Replace bulb. |
| Aigua a l'interior del dispositiu | Improperly sealed lampshade/cover. | Ensure rubber sealant is correctly positioned and cover is tightly secured. |
Si el problema persisteix després d'intentar aquestes solucions, poseu-vos en contacte amb l'atenció al client.
6. Especificacions
- Marca: LEONITA
- Número de model: 81312
- Dimensions (L x A x A): 13.78" x 6.5" x 9.84"
- Pes: 4.3 lliures
- Material: Die-casting Aluminum, Frosted Glass
- Color: Negre
- Voltage: 120 V
- Base de la bombeta: E26 Mitjà
- Max Wattage: 40W (Bulbs not included)
- Nivell de resistència a l'aigua: IP54 (Waterproof, Wet Location Rated)
- Temperatura de treball: -4 °F a 104 °F
- Certificacions: ETL Listed (light body), UL Certified (E26 socket)
- Tipus de muntatge: Wall Mount, Flush Mount (Wall & Ceiling)
- Components inclosos: Mounting Hardware, Waterproof Wire Nuts
7. Garantia i Suport
This LEONLITE Bulkhead Light comes with a garantia del fabricant de tres anys, providing peace of mind for your purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical assistance, or any questions regarding your product, please contact LEONLITE customer support through the retailer where the product was purchased or visit the official LEONLITE weblloc per obtenir informació de contacte.
Please have your model number (81312) and proof of purchase ready when contacting support.