Introducció
Thank you for choosing the Emerio WK-122730 Glass Kettle. This appliance is designed for efficient water heating and tea preparation, offering precise temperature control and a convenient integrated tea infuser. Please read this manual carefully before first use to ensure safe and optimal operation.
Image: The Emerio WK-122730 glass kettle with its integrated tea infuser, filled with tea, on a wooden surface.
Instruccions de seguretat
Seguiu sempre les precaucions de seguretat bàsiques quan utilitzeu aparells elèctrics per reduir el risc d'incendi, descàrrega elèctrica i lesions personals.
- No submergiu el bullidor, la base d'alimentació, el cable ni l'endoll en aigua ni en altres líquids.
- Assegureu-vos que el voltagEl volum indicat a l'aparell coincideix amb la xarxa elèctrica localtage abans de connectar.
- Mantenir l'aparell fora de l'abast dels nens.
- Do not operate the kettle if the cord or plug is damaged, or if the appliance malfunctions or has been damaged in any way.
- Col·loqueu la tetera sobre una superfície estable, plana i resistent a la calor, allunyada de superfícies calentes o flames obertes.
- Do not fill above the maximum level indicator to prevent boiling water from overflowing.
- Tanqueu sempre la tapa correctament abans de fer funcionar.
- Desendolleu el bullidor de la presa de corrent quan no l'utilitzeu i abans de netejar-lo.
- The kettle is equipped with an automatic shut-off and boil-dry protection for safety.
Configuració i primer ús
- Desembalatge: Carefully remove the kettle and all accessories from the packaging. Retain packaging for future storage or disposal.
- Neteja inicial: Before first use, fill the kettle with clean water to the maximum level. Boil the water, then discard it. Repeat this process 2-3 times to remove any manufacturing residues.
- Col·locació: Place the power base on a dry, flat, and stable surface. Ensure the power cord is not dangling or in contact with hot surfaces.
- Connexió d'alimentació: Connecteu el cable d'alimentació a una presa elèctrica amb connexió a terra.
Image: The Emerio WK-122730 glass kettle resting on its 360-degree rotating power base, illustrating ease of placement.
Instruccions de funcionament
Omplint la tetera
- Traieu la tetera de la seva base elèctrica.
- Open the lid and fill the kettle with the desired amount of fresh, cold water. Do not fill below the minimum (0.5L) or above the maximum (1.7L) mark.
- Tanqueu la tapa amb fermesa.
Ús de l'infusor de te
The kettle features a removable stainless steel tea infuser for brewing loose leaf tea directly.
- After filling with water, open the infuser basket and add your desired amount of loose leaf tea.
- Close the infuser basket and place it securely into the kettle.
- Proceed with temperature selection and heating.
- Once brewing is complete, carefully remove the infuser using its handle to prevent over-steeping.
Image: A person demonstrating the placement of the tea infuser into the Emerio WK-122730 glass kettle.
Temperature Selection and Heating
The kettle offers 5 preset temperature options for various beverages.
- Place the filled kettle onto the power base.
- Press the temperature selection button (often marked with a thermometer icon or temperature values) repeatedly to cycle through the available temperatures: 50 °C, 70 °C, 80 °C, 90 °C, 100 °C. The selected temperature will be indicated by an illuminated LED.
- Press the power button (often marked with an 'On/Off' symbol) to start the heating process.
- The LED lighting inside the kettle will change color according to the water temperature, providing a visual indication of the heating progress.
- Once the selected temperature is reached, the kettle will automatically switch off.
Image: A close-up of the control panel on the Emerio WK-122730 kettle, showing temperature selection buttons and power button.
Imatge: Múltiple views of the Emerio WK-122730 glass kettle, illustrating the color-changing LED illumination for 50°C, 70°C, 80°C, 90°C, and 100°C.
Funció de mantenir la calor
The kettle includes a keep-warm function. After reaching the selected temperature, the kettle can maintain this temperature for a certain period. Refer to the specific product documentation for the exact duration of the keep-warm function.
Manteniment i Neteja
Una neteja i un manteniment regulars allargaran la vida útil de la teva tetera.
- Abans de la neteja: Desendolleu sempre el bullidor de la presa de corrent i deixeu-lo refredar completament abans de netejar-lo.
- Neteja exterior: Netegeu l'exterior del bullidor i la base elèctrica amb un drap suau i sec.amp tela. No utilitzeu netejadors abrasius ni productes químics durs.
- Neteja interior: For general cleaning, rinse the interior with clean water.
- Tea Infuser Cleaning: Remove the tea infuser and rinse it under running water. Use a small brush if necessary to remove tea leaves. It is dishwasher safe.
- Descalcificació: Amb el temps, es poden acumular dipòsits minerals (calç) dins del bullidor, especialment en zones amb aigua dura.
- Fill the kettle with a mixture of water and white vinegar (1:1 ratio) or a commercial descaling solution.
- Bulliu la barreja i deixeu-la reposar durant almenys 30 minuts, o més si la massa és gruixuda.
- Discard the mixture and rinse the kettle thoroughly several times with fresh water to remove any residue and odor.
- Emmagatzematge: When not in use, store the kettle in a dry place, away from direct sunlight and moisture.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La tetera no s'escalfa. | No power supply; Kettle not properly placed on base; Boil-dry protection activated. | Check power outlet and plug; Ensure kettle is correctly seated on the base; Allow kettle to cool down, then refill with water. |
| L'aigua té un gust inusual. | New appliance odor; Limescale buildup. | Perform initial cleaning steps (boil and discard water several times); Descale the kettle. |
| Kettle switches off before boiling/reaching selected temperature. | Limescale buildup; Faulty sensor. | Descale the kettle thoroughly; If problem persists, contact customer support. |
| Els llums LED no funcionen. | Mal funcionament elèctric. | Ensure kettle is powered on; If problem persists, contact customer support. |
Especificacions del producte
- Número de model: WK-122730
- Capacitat: 1.7 litres
- Potència: 2200 watts
- Voltage: 220 Volts
- Material: Borosilicate Glass, Stainless Steel, Plastic
- Color: Plata
- Característiques especials: BPA-free, Temperature Selection (50|70|80|90|100°C), Color-changing LED Interior Lighting, Keep Warm Function, Automatic Shut-off, Overheat Protection, Removable Stainless Steel Tea Infuser.
- Pes de l'article: 1.42 quilos
- País d'origen: Xina
Image: The Emerio WK-122730 glass kettle displaying its approximate height (27 cm) and base width (21.80 cm).
Image: A circular green logo indicating the product is BPA-free.
Informació de la garantia
This product comes with a manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions. Spare parts availability is typically 1 year from the date of purchase. Keep your proof of purchase for any warranty claims.
Atenció al client
If you encounter any issues not covered in the troubleshooting section or require further assistance, please contact the retailer or the manufacturer's customer service department. Contact details can usually be found on the product packaging or the manufacturer's official weblloc.