PAUTIX COB LED Strip Light Instruction Manual

1. Introducció

This manual provides essential information for the safe and effective installation, operation, and maintenance of your PAUTIX COB LED Strip Light. Please read these instructions thoroughly before use and retain them for future reference.

The PAUTIX COB LED Strip Light offers tunable white light, allowing adjustment from warm white (2700K) to cool white (6500K). It features Chip-on-Board (COB) technology for uniform illumination without visible dark spots, a high Color Rendering Index (CRI) of 90+, and a flexible design for various applications.

2. Característiques del producte

• Llum blanca sintonitzable: Adjust color temperature from 2700K (warm white) to 6500K (cool white).
• Regulable: Supports 0-100% dimming (controller sold separately).
• COB Technology: 3200 LEDs per 16.4ft/5m for super bright and even lighting, eliminating dark spots.
• CRI alt: Color Rendering Index (CRI) greater than 90 for accurate color reproduction.
• Cuttable and Connectable: Can be cut every 0.98 inches (25mm) at designated marks. Reconnection is possible via soldering or connectors (not included).
• Adhesiu fort: Equipped with 3M adhesive for reliable installation on clean, dry, and smooth surfaces.
• Disseny durador: Features a double-layer PCB board for extended lifespan of over 50,000 hours.
• Voltage: Operates on 24V DC constant voltage.

3. Especificacions

4. Informació de seguretat

• Assegureu-vos que la font d'alimentació estigui desconnectada abans de la instal·lació o el manteniment.
• Only use a 24V DC power supply with appropriate current (e.g., 24V 1.5A or higher for 16.4ft strip). A 12V power supply will not work.
• This LED strip is designed for indoor use only and is not water-resistant. Avoid exposure to moisture or wet conditions.
• Do not bend the strip sharply or apply excessive force, as this may damage the internal components.
• Cut the strip only at the designated cutting marks to avoid damaging the circuit.
• Mantenir fora de l'abast dels nens.

5. Configuració i instal·lació

The PAUTIX COB LED Strip Light is designed for flexible installation. Follow these steps for proper setup:

5.1 Components necessaris (no inclosos)

• 24V DC Power Supply (e.g., 24V 1.5A or higher)
• CCT LED Controller (for dimming and color temperature adjustment)
• Optional: Solderless connectors or soldering equipment for custom lengths.

Image: Compatible accessories including 24V power supplies and CCT controllers. These items are sold separately.

5.2 Passos d'instal·lació

1. Prepara la superfície: Ensure the installation surface is clean, dry, and smooth. Wipe it thoroughly to remove any dust or grease.
2. Measure and Cut (if necessary): Measure the desired length for your installation. If cutting is required, locate the designated cutting marks (approximately every 0.98 inches or 25mm) on the copper sheet of the COB strip. Cut precisely at these marks using sharp scissors.


Imatge: Detallada view of the LED strip showing cutting points and dimensions (10mm width, 1.9mm thickness).

3. Peel and Attach: Carefully peel off the backing from the 3M adhesive tape on the back of the LED strip. Press the strip firmly onto the prepared surface, ensuring good contact along its entire length.
4. Connectar al controlador: Connect the LED strip to your CCT controller. Ensure the polarity is correct (arrow to arrow, or matching positive/negative terminals).
5. Connecteu-vos a la font d'alimentació: Connect the CCT controller to a compatible 24V DC power supply.

Image: Visual guide for installation, demonstrating surface preparation, adhesive application, and proper connection.
6. Esquemes de cablejat: For longer runs or complex layouts, consider single or double feed wiring to maintain consistent brightness.


Image: Wiring diagrams for single and double feed setups, useful for larger installations to ensure uniform power distribution.

6. Funcionament

Once installed and connected to a compatible CCT controller and 24V power supply, your PAUTIX COB LED Strip Light can be operated as follows:

6.1 Encès/Apagat

Use the power button on your CCT controller to turn the LED strip light on or off.

6.2 Ajust de la temperatura de color (CCT)

Use the CCT controls on your controller to adjust the white light from warm (2700K) to cool (6500K). This allows you to select the desired ambiance for your space.

Image: Visual representation of the tunable white light range, from 2700K to 6500K.

6.3 Atenuació

Use the dimming controls on your controller to adjust the brightness level from 0% to 100%. This feature allows for precise control over the light intensity.

Image: Illustration of dimming levels, from 25% to 100% brightness.

7. Manteniment

The PAUTIX COB LED Strip Light requires minimal maintenance. Follow these guidelines to ensure longevity:

• Neteja: Gently wipe the surface of the LED strip with a soft, dry cloth to remove dust. Do not use abrasive cleaners or excessive moisture.
• Inspecció: Periodically check the strip and connections for any signs of damage or loose connections.
• Evitar obstruccions: Ensure the LED strip is not covered by objects that could trap heat, as this may reduce its lifespan.

8. Solució De Problemes

If you encounter issues with your PAUTIX COB LED Strip Light, refer to the following common problems and solutions:

• La llum no s'encén:
  • Check if the 24V power supply is properly connected and receiving power.
  • Verify that the LED strip is correctly connected to the CCT controller, ensuring proper polarity.
  • Ensure the CCT controller is functioning correctly and is turned on.
• Incorrect color temperature or dimming issues:
  • Confirm that you are using a compatible CCT controller.
  • Check the controller's battery (if applicable) and ensure it is paired correctly with the receiver.
  • Ensure all connections between the strip, controller, and power supply are secure.
• Uneven brightness or dark spots:
  • While COB technology minimizes dark spots, ensure the power supply is adequate for the length of the strip. For very long runs, consider using a double-feed wiring configuration.
  • Check for any physical damage or kinks in the strip.
• L'adhesiu no s'adhereix:
  • Ensure the installation surface was thoroughly cleaned and dry before application.
  • Apply firm, even pressure along the entire strip during installation.
  • For porous or uneven surfaces, additional mounting clips or adhesive may be required (not included).

If these steps do not resolve the issue, please contact PAUTIX customer support for further assistance.

9. Garantia i Suport

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official PAUTIX weblloc web. Conserveu el rebut de compra com a comprovant de compra per a qualsevol reclamació de garantia.

PAUTIX Customer Support: For technical assistance or product inquiries, please contact PAUTIX directly through their official channels.