LEDVANCE 65636
Sylvania 32ft RGB Flexible Light Strip Starter Kit Instruction Manual
Model: 65636 | Marca: LEDVANCE
Informació important de seguretat
- Només per a ús interior: This product is designed for indoor use in dry locations. Do not expose to water or high humidity.
- Seguretat elèctrica: Ensure the power adapter is connected to a suitable power outlet. Do not overload electrical circuits.
- Instruccions de tall: The LED strips can be cut for customized length. Only cut along the designated markings to avoid damaging the strip.
- Instal·lació: Desconnecteu sempre l'alimentació abans de la instal·lació o el manteniment.
- Calor: Do not cover the LED strips with materials that may trap heat, as this can cause overheating.
- Nens: Mantenir el producte i els seus components fora de l'abast dels nens.
Contingut del paquet
Verifiqueu que tots els components siguin presents al vostre paquet:
- (2) 16.4ft RGB Flexible LED Light Strips
- (1) Font d'alimentació
- (1) IR Remote Controller (with battery included)
- (20) Clips de muntatge
Image: Main product image showing the light strips, remote, power adapter, and clips.
Configuració i instal·lació
- Prepara la superfície: Ensure the installation surface is clean, dry, and smooth for optimal adhesion of the clips.
- Connectar components: Connect the LED light strips to the controller, ensuring the arrows on the connectors align. Then, connect the power supply to the controller.
- Funcionalitat de prova: Before permanent mounting, plug in the power supply and use the remote control to test the light strips. Verify all colors and modes function correctly.
- Customize Length (Optional): If a shorter length is desired, only cut the LED strips along the designated cutting marks (usually indicated by a scissor icon or copper pads). Cutting elsewhere will damage the strip.
- Mount the Strips: Remove the adhesive outer layer from the back of the mounting clips and press firmly for five seconds when mounting. Use the provided clips to secure the light strips in your desired location, such as under cabinets, behind TVs, or along shelves.
- Activa el comandament a distància: Remove the plastic tab from the remote control's battery door to activate the battery.
Image: Step-by-step diagram illustrating how to connect the light strips, identify cutting points, and mount them using clips.
Funcionament
The Sylvania RGB Flexible Light Strips are controlled using the included IR remote. Ensure the remote is pointed towards the IR receiver on the controller for optimal response.
Funcions de control remot:
- ON/OFF: Power the light strips on or off.
- Selecció de color: Trieu entre 16 colors estàtics utilitzant els botons de color.
- Dimecres: Adjust the brightness of the selected color or dynamic mode.
- Modes dinàmics: Select from 4 pre-programmed dynamic modes (e.g., Flash, Strobe, Fade, Smooth) to create different lighting effects.
Image: Detailed illustration of the IR remote control, highlighting buttons for power, color selection, dimming, and dynamic modes.
Manteniment
- Neteja: Netegeu suaument les tires LED amb un drap sec i suau. No utilitzeu netejadors líquids ni materials abrasius.
- Vida útil: The LED technology provides a long operational life of up to 30,000 hours under normal use conditions.
- Substitució de la bateria remota: If the remote control becomes unresponsive, replace the CR2025 lithium coin cell battery.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Els llums no s'encenen. | Power connection issue, remote battery dead, IR receiver blocked. | Check all connections (power supply, controller, strips). Ensure arrows on connectors align. Replace remote battery. Ensure remote is pointed at the IR receiver without obstruction. |
| El comandament a distància no respon. | Remote battery dead, remote too far, IR receiver blocked. | Replace remote battery. Ensure remote is within range and pointed directly at the IR receiver. Remove any obstructions between the remote and receiver. |
| Some sections of the light strip are not lighting up. | Damaged section, incorrect cutting. | Inspect the strip for physical damage. If a section was cut incorrectly, it may be permanently damaged. Ensure connections are secure. |
Especificacions
| Característica | Detall |
|---|---|
| Número de model | 65636 |
| Marca | LEDVANCE (Sylvania) |
| Color | RGB (16 colors) + White |
| Longitud | 32ft (2 x 16.4ft strips) |
| Ús | Només interior |
| Característiques especials | Color Changing, Dimmable, Energy Efficient |
| Tipus de font de llum | LED |
| Font d'alimentació | Elèctric amb cable |
| Tipus de controlador | Comandament a distància IR |
| Voltage | 12 Volts |
| Wattage | 24 watts |
| Connectivitat | infrarojos |
| Material | Plàstic |
| Pes de l'article | 10.88 unces |
| Vida útil | Fins a 30,000 hores |
| Resistència a l'aigua | No resistent a l'aigua |
| UPC | 046135656361 |
Garantia i Suport
This Sylvania LED Flexible Light Strip Starter Kit is backed by a Garantia del fabricant de 1 anys.
For technical support, warranty claims, or additional product information, please visit the official LEDVANCE weblloc o poseu-vos en contacte amb el seu departament d'atenció al client.
També podeu visitar el Botiga LEDVANCE a Amazon per a més productes i informació.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.