WERCHTAY 30A Solar Charge Controller User Manual

1. Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your WERCHTAY 30A Solar Charge Controller. This intelligent regulator is designed to manage power flow from solar panels to batteries and loads, ensuring efficient charging and protection for your solar power system. It is compatible with 12V and 24V systems and features a dual USB output for charging external devices.

Imatge 1.1: Frontal view of the WERCHTAY 30A Solar Charge Controller, showing the LCD display, control buttons, and dual USB ports.

2. Instruccions de seguretat

• Install the charge controller on a flat, well-ventilated surface indoors. Avoid outdoor exposure to moisture.
• The charge regulator is suitable only for lead-acid batteries: OPEN, AGM, GEL. It is not compatible with nickel hydride, lithium, Li-ion, or other battery types.
• This controller is designed for use with photovoltaic panels as the charging power source. Do not use DC power or other power sources for charging.
• Ensure correct polarity when connecting components. Incorrect connections can damage the controller and other system components.
• Always connect the battery first, then the solar panels, and finally the load. Disconnect in the reverse order.
• The LCD screen may show a voltage error of 0.2V to 0.3V; this is normal operation.

3. Característiques del producte

• Smart PWM Technology: Compatible with 12V/24V systems, 30A discharge current, dual USB output (5V/2.5A). Features a built-in industrial microcontroller for automatic management and parameter memorization.
• Compatibilitat de la bateria: Supports lead-acid batteries (OPEN, AGM, GEL). User-adjustable modes for ternary lithium (b2) and lithium iron phosphate (b3) batteries.
• Functional LCD Screen: Provides clear status and data display, allowing for mode switching and parameter configuration.
• 3-Stage PWM Control Charging: Utilizes direct charge, lifting charge, and floating charge stages for efficient and fast intelligent charging, extending battery lifespan.
• Multiple Intelligent Protection: Includes built-in overcurrent, short circuit, reverse connection, and open circuit protection. Automatic recovery ensures no damage to the controller.
• Volum baixtage Protecció: Automatically shuts down if battery voltage drops below 8V to protect battery life.

4. Producte acabatview i Components

The WERCHTAY Solar Charge Controller features a compact design with an intuitive LCD display and clearly labeled connection terminals.

Image 4.1: Labeled components of the controller.

1. Pantalla LCD: Displays system status and parameters.
2. Turn On Button: Used to activate the load output.
3. Home Page Button: Navigates to the main display interface.
4. Port USB: Dual 5V/2.5A outputs for charging external devices.
5. Scroll Down/Manual Button: S'utilitza per navegar pels menús i ajustar la configuració.
6. Solar Panel Interface: Terminals per connectar panells solars.
7. Load Port: Terminals for connecting DC loads.
8. Port de la bateria: Terminals for connecting the battery.

Image 4.2: Physical dimensions of the controller.

5. Configuració i instal·lació

Follow these steps for proper system connection. Always connect components in the specified order to prevent damage.

Image 5.1: System Connection Diagram.

1. Connecteu primer la bateria: Connect the battery to the battery terminals of the charge controller. Ensure correct polarity (+ to + and - to -). The controller will detect the system voltage (12V or 24V) automatically.
2. Connecteu els panells solars: Connect the solar panels to the solar panel terminals of the charge controller. Ensure correct polarity.
3. Connect DC Load: Connect your DC loads (e.g., lights) to the load terminals of the charge controller.
4. Connect Inverter (Optional): If using an inverter for AC loads, connect it to the battery terminals (not directly to the load terminals of the controller).

Important: Disconnect components in the reverse order: Load → Solar Panels → Battery.

6. Instruccions de funcionament

Pantalla LCD i botons 6.1

Image 6.1: LCD Display Icons and Button Functions.

• Àrea de visualització digital: Espectacles voltage, corrent i altres paràmetres.
• Voltage Symbol (V%): Indica el volum de la bateriatage i percentatgetage.
• Horari: Used for timer settings.
• Current Symbol (AH): Indicates current flow and accumulated ampe-hores.
• Panels Icon: Indicates solar panel activity.
• Load Identification: Indicates load status.
• Charging Logo:
  • Steady on: Direct charge/Lift charge
  • Slow flash: Float charge
• Five Battery Level Mark: Visual indicator of battery charge level.
• Output Identification: Indicates power output status.

Funcions del botó:

• Left Button (Main Page): Press to browse through different display screens and parameters.
• Middle Button (Turn On/Off): Press to turn the load output on or off.
• Right Button (Flip Down/Manual): Used to navigate menus and adjust parameter values.

6.2 Configuració dels paràmetres

Per accedir i modificar paràmetres:

Image 6.2: Parameter Setting Interfaces.

1. Browsing Interface: Press the Left button (Main Page) to cycle through different display screens and parameters.
2. Paràmetres de configuració:
   • While browsing interfaces 2-5 (Float Charging Voltage, Discharge Recovery Voltage, Discharge To Voltage, Load Mode), press and hold the Right button (Flip Down/Manual) for 3 seconds to enter manual setting mode. The number will blink.
   • Use the Middle button (Turn On/Off) to increase the value and the Right button (Flip Down/Manual) to decrease the value.
   • After adjusting, the setting will automatically save after 3 seconds of inactivity.
   • To restore default values, press and hold the Middle button (Turn On/Off) for 5 seconds.

Paràmetres ajustables:

• Float Charging Voltage (Default: 13.7V): El voltage at which the battery is maintained after full charge.
• Descàrrega Recuperació Voltage (Default: 12.6V): El voltage at which the load output will reconnect after being disconnected due to low battery.
• Discharge Stop Voltage (Default: 10.7V): El voltage at which the load output will disconnect to protect the battery from over-discharge.
• Mode de càrrega: Timer setting for load output (ON/OFF hours).
• Tipus de bateria:
  • b1: Lead-acid (OPEN, AGM, GEL)
  • b2: Ternary lithium
  • b3: Lithium iron phosphate

Image 6.3: Dual USB Ports for charging external devices.

7. Manteniment

• Regularly check all connections for tightness and corrosion.
• Mantingueu el controlador net i lliure de pols i deixalles.
• Assegureu-vos que hi hagi una ventilació adequada al voltant del controlador per evitar el sobreescalfament.
• Periodically verify battery voltage and health.

8. Solució De Problemes

• LCD Voltage Discrepància: A slight error of 0.2V to 0.3V on the LCD screen is normal and does not indicate a malfunction.
• Controller Shutdown (Low Battery): Si la bateria voltage drops below 8V, the solar controller will automatically shut down the load output to protect the battery. The load will reconnect when the battery voltage recovers to the Discharge Reconnect Voltage (default 12.6V).
• Sense càrrega:
  • Check solar panel connections and ensure they are receiving sunlight.
  • Verify battery connections and ensure the battery is not completely discharged.
  • Check for any error codes or indicators on the LCD display.
• No Load Output:
  • Ensure the load output is turned on via the Middle button.
  • Check load connections.
  • Comproveu el volum de la bateriatage is above the Discharge Stop Voltage.

9. Especificacions

10. Garantia i Suport

WERCHTAY provides a one-year warranty for this product. We also offer lifetime after-sales service. If you encounter any issues or have questions, please contact our customer support team for assistance.

For support, please refer to the contact information provided with your purchase or visit the official WERCHTAY store on Amazon: WERCHTAY Store.