1. Introducció
Thank you for choosing the Bosch AdvancedHedgeCut 70 electric hedge trimmer. This powerful and ergonomically designed tool is engineered for efficient and comfortable trimming of large hedges. Featuring Pro-Silence technology, it significantly reduces noise levels during operation. The 500 W Eco motor ensures high cutting performance, while the 70 cm blade length and 34 mm cutting capacity are ideal for dense foliage.
This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your hedge trimmer. Please read it thoroughly before first use and keep it for future reference.
2. Instruccions generals de seguretat
ADVERTIMENT: Llegiu totes les advertències, instruccions, il·lustracions i especificacions de seguretat proporcionades amb aquesta eina elèctrica. L'incompliment de totes les instruccions que s'indiquen a continuació pot provocar descàrregues elèctriques, incendis i/o lesions greus.
- Always wear appropriate personal protective equipment, including safety glasses, hearing protection, gloves, and sturdy footwear.
- Keep children and bystanders away while operating the hedge trimmer.
- Inspect the hedge trimmer for damage before each use. Do not use if damaged.
- Ensure the power cord is in good condition and positioned to avoid being cut by the blades.
- Never operate the hedge trimmer in wet conditions or rain.
- Disconnect the power supply before cleaning, maintenance, or when leaving the tool unattended.
- Hold the hedge trimmer firmly with both hands during operation.
- Avoid cutting near electrical cables or other hidden objects.
- No sobrepasseu. Mantenir un bon peu i un equilibri en tot moment.
- Guardeu el tallabarders en un lloc sec i segur, fora de l'abast dels nens.
3. Producte acabatview
The Bosch AdvancedHedgeCut 70 is designed for comfortable and efficient hedge trimming. Key components include:
- Fulla: 70 cm laser-cut, diamond-ground blades for precise cutting.
- Protector de fulla: Protective cover for the blade when not in use.
- Maneta multiposició: Ergonomic handle for comfortable operation at various angles.
- Pro-Silence Motor: 500 W motor with reduced noise output.
- Protector de mà: Transparent hand guard for clear visibility of the cutting area.
- Cable de corrent: Integrated power cable for mains connection.
Figure 3.1: A woman operating the Bosch AdvancedHedgeCut 70 hedge trimmer, demonstrating its ProSilence technology. A man is relaxing nearby, undisturbed by the low noise level.
Figura 3.2: Un primer pla view of the precision-ground blades of the AdvancedHedgeCut 70, highlighting their sharpness and cutting efficiency.
Figure 3.3: Detail of the ergonomic multi-position handle on the AdvancedHedgeCut 70, designed for comfortable use at various angles.
4. Configuració
- Desembalatge: Carefully remove the hedge trimmer and all accessories from the packaging. Ensure all components listed in the "Components Included" section are present.
- Blade Guard Removal: Before use, remove the blade guard from the cutting blade. Always reattach the blade guard when the tool is not in use or during transport.
- Connexió d'alimentació: Connect the hedge trimmer's power cable to a suitable outdoor extension cord. Ensure the extension cord is rated for outdoor use and is in good condition. Use a cable retainer if available on the extension cord to prevent accidental disconnection.
- Comprovació prèvia al funcionament: Before starting, visually inspect the blades for any damage or debris. Ensure all handles are securely fastened.
5. Instruccions de funcionament
5.1 Inici i aturada
- To start the hedge trimmer, press and hold both safety switches (one on the front handle, one on the rear handle) simultaneously.
- To stop the hedge trimmer, release either safety switch. The blades will stop quickly.
5.2 Tècniques de retall
For best results and safety, follow these guidelines:
- Holding the Tool: Always hold the hedge trimmer firmly with both hands. The multi-position handle allows for comfortable grip at various angles, reducing fatigue during extended use.
- Cutting Motion: Use a sweeping motion, moving the blades along the hedge. For horizontal cuts, tilt the blade slightly (5-10 degrees) towards the hedge to ensure a clean cut.
- Vertical Cuts: When trimming the sides of hedges, move the trimmer upwards, then downwards, ensuring a smooth, even finish.
- Thick Branches: The AdvancedHedgeCut 70 can cut branches up to 34 mm in diameter. For thicker branches, position the blade teeth around the branch and allow the tool to cut through without forcing.
Figure 5.1: The hedge trimmer blade effectively cutting through a thick branch, demonstrating its robust cutting capacity.
Figure 5.2: The hedge trimmer blade positioned close to a wall, illustrating its ability to trim edges precisely without damaging the surface.
6. Manteniment
Un manteniment regular garanteix la longevitat i el rendiment òptim del vostre tallabardisses.
- Neteja: After each use, disconnect the power supply and clean the blades and housing. Use a stiff brush to remove sap and debris from the blades. Wipe the housing with a damp tela. No utilitzeu dissolvents ni netejadors abrasius.
- Cura de la fulla: Periodically lubricate the blades with a light machine oil or blade lubricant to prevent rust and ensure smooth operation. If the blades become dull, they can be sharpened by a qualified service technician.
- Emmagatzematge: Always attach the blade guard before storing. Store the hedge trimmer in a dry, well-ventilated area, away from direct sunlight and extreme temperatures. Keep it out of reach of children.
- Cable d'alimentació: Regularly inspect the power cord for any signs of damage. If the cord is damaged, it must be replaced by Bosch or an authorized service center to avoid a hazard.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El tallabardisses no s'engega. | No power supply; safety switches not pressed simultaneously; damaged power cord. | Check power connection and extension cord. Ensure both safety switches are fully depressed. Inspect power cord for damage; replace if necessary. |
| Mal rendiment de tall. | Dull blades; blades clogged with debris; cutting branches too thick. | Clean blades and lubricate. Have blades sharpened by a professional. Avoid cutting branches exceeding 34 mm. |
| Vibració excessiva. | Damaged blades; loose components. | Inspect blades for damage. Check for any loose screws or parts. If problem persists, contact customer support. |
8. Especificacions tècniques
| Característica | Especificació |
|---|---|
| Número de model | 06008C0903 |
| Potència del motor | 500 W |
| Longitud de la fulla | 70 cm |
| Cutting Capacity (Max. Branch Diameter) | 34 mm |
| No-Load Stroke Rate | 3400 cops/min |
| Acoustic Power Level | 93 dB |
| Friction Clutch Torque | 60 Nm |
| Pes (sense bateria) | 4.1 kg |
| Dimensions del producte (L x A x A) | 50 x 60 x 10 cm |
| Font d'alimentació | Elèctric amb cable |
| Material de la fulla | Alumini |
| Components inclosos | AdvancedHedgeCut 70, Blade Cover, Carton |
9. Garantia i Suport
Bosch provides high-quality products and stands by their durability. This product comes with a commitment to spare parts availability for 5 anys.
For warranty claims, technical assistance, or to order spare parts, please contact your local Bosch service center or visit the official Bosch website. Ensure you have your model number (06008C0903) and proof of purchase available when contacting support.
Per a més informació, podeu visitar el Botiga Bosch a Amazon.