JORAIR R1 P1801 P1802

JORAIR R1 P1801 P1802 HEPA Replacement Filter User Manual

For YIOU R1 and Elechomes P1801/P1802 Air Purifiers

Introducció

This manual provides instructions for the proper installation, maintenance, and use of your JORAIR R1 P1801 P1802 HEPA Replacement Filters. These filters are designed to maintain optimal air quality in your home when used with compatible air purifiers.

Compatibilitat de productes

The JORAIR R1 P1801 P1802 HEPA Replacement Filters are specifically designed for use with the following air purifier models:

  • YIOU R1 Air Purifier
  • Purificador d'aire Elechomes P1801
  • Purificador d'aire Elechomes P1802

Important: These filters are NOT compatible with YIOU M1 models.

Image showing compatible air purifier models YIOU R1, YIOU P1802, Elechomes P1801, and an incompatible YIOU M1 model with the filter dimensions.

Figura 1: Compatibilitat sobreview for JORAIR R1 P1801 P1802 HEPA Replacement Filters. Displays the filter dimensions (7.87" x 0.78" x 9.17") and visually indicates compatible YIOU R1, YIOU P1802, and Elechomes P1801 air purifiers, alongside an incompatible YIOU M1 model.

Product Features: 3-Stage Sistema de filtració

Each JORAIR R1 P1801 P1802 replacement filter incorporates a comprehensive 3-stage filtration system to effectively purify the air:

  1. Prefiltre: Captures larger particles such as dust, hair, pet fur, and lint, extending the life of the subsequent filters.
  2. Filtre HEPA: Designed to capture 99.97% of airborne particles as small as 0.3 microns, including pet dander, pollen, and fine dust.
  3. Filtre de carbó activat: Absorbs various unpleasant odors and fumes, such as cooking smells, cigarette smoke, and volatile organic compounds (VOCs).
Diagrama que il·lustra els 3-stage filtration process of the JORAIR filter, showing air passing through a pre-filter, HEPA filter, and activated carbon filter.

Figura 2: Detallada view dels 3tage filtration system, highlighting the function of the Pre-filter, HEPA filter, and Activated Carbon filter.

Image showing various airborne particles and odors that the filter effectively removes, including cooking odors, dust, smoke odors, pet dander, hair, VOCs, pollen, and lint.

Figure 3: Illustration of the filter's effectiveness against common airborne pollutants and odors.

Instruccions d'instal·lació

Follow these steps to install or replace your JORAIR HEPA filter:

  1. Apagar: Ensure your air purifier is turned off and unplugged from the power outlet before beginning installation.
  2. Accés al compartiment del filtre: Locate and open the filter compartment cover on your air purifier. Refer to your air purifier's specific user manual for exact instructions on accessing the filter.
  3. Elimina el filtre antic: Carefully remove the used filter. It may be dusty, so handle it with care and dispose of it properly.
  4. Desempaqueta el filtre nou: Remove the new JORAIR replacement filter from its protective packaging. Filters are sealed to protect their lifetime.
  5. Insereix un filtre nou: Insert the new filter into the compartment, ensuring it is oriented correctly. The filter should fit snugly.
  6. Compartiment tancat: Tanqueu bé la tapa del compartiment del filtre.
  7. Restaura l'alimentació: Torneu a connectar el purificador d'aire a la presa de corrent i engegueu-lo.
  8. Indicador de restabliment del filtre (si escau): If your air purifier has a filter replacement indicator, follow the manufacturer's instructions to reset it.

Manteniment i substitució

To ensure optimal performance and air quality, regular filter replacement is essential.

  • Freqüència de substitució: It is recommended to replace the JORAIR R1 P1801 P1802 HEPA Filter every 3-6 months. This duration may vary depending on air quality, usage frequency, and environmental factors (e.g., presence of pets, smoking, high pollution levels).
  • Inspecció visual: Periodically inspect the filter for visible signs of dirt, dust accumulation, or discoloration. A heavily soiled filter indicates it's time for replacement.
  • Performance Decline: If you notice a decrease in air purifier performance, increased odors, or reduced airflow, it may be an indication that the filter needs to be replaced sooner.
Image showing a new filter next to a filter after 6 months of use, illustrating the need for replacement to maintain optimal performance.

Figure 4: Visual comparison of a new filter versus a filter after 6 months of use, emphasizing the recommended replacement schedule.

Resolució de problemes

Si teniu problemes després de substituir el filtre, tingueu en compte el següent:

  • El llum indicador del filtre roman encès: After replacing the filter, some air purifiers require a manual reset of the filter indicator light. Consult your air purifier's user manual for specific instructions on how to reset the filter life monitor.
  • Reduced Airflow or Unusual Noise: Ensure the filter is correctly seated in its compartment and the cover is securely closed. An improperly installed filter can lead to reduced efficiency or noise.
  • Olors persistents: If odors persist after filter replacement, verify that the new filter was removed from all packaging. If the issue continues, the air quality in the environment might be exceptionally poor, requiring more frequent filter changes, or there might be another source of odor not addressed by the filter.

For further assistance, please refer to the "Support" section of this manual.

Especificacions

CaracterísticaDetall
MarcaJORAIR
Número de modelR1 P1801 P1802
Dispositius compatiblesYIOU R1, Elechomes P1801, Elechomes P1802 Air Purifiers
Sistema de filtració3-Stage (Pre-filter, HEPA, Activated Carbon)
Eficiència HEPA99.97% of particles as small as 0.3 microns
Classificació MERV13
MaterialPaper
Dimensions del producte (L x A x A)8.9" x 0.86" x 7.7" (approximately 22.6cm x 2.18cm x 19.5cm)
Pes de l'article13 unces (aproximadament 368 grams)
Substitució recomanadaCada 3-6 mesos
Image displaying the precise dimensions of the JORAIR R1 P1801 P1802 HEPA Replacement Filter: 9.17 inches in height, 7.87 inches in width, and 0.78 inches in thickness.

Figure 5: Detailed product dimensions of the replacement filter.

Suport

For any questions, concerns, or support regarding your JORAIR R1 P1801 P1802 HEPA Replacement Filters, please contact us directly. We are committed to ensuring your satisfaction with our products.

Contact information is typically available through the retailer where the product was purchased or on the official JORAIR weblloc.

Note: This product is made of FSC-Certified paper, reflecting a commitment to sustainable forestry practices.

© 2026 JORAIR. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.