POFAN Q5-TX Wireless HDMI Transmitter User Manual

1. Producte acabatview

The POFAN Q5-TX is a wireless HDMI transmitter designed to extend HDMI signals wirelessly. It is compatible with specific POFAN wireless receivers (ASIN: B09QKHKPCM i ASIN: B09FPHWNHY). This transmitter supports 2.4GHz and 5GHz frequencies for stable video and audio streaming and features a compact design with a built-in antenna for discreet placement. One receiver can support up to 8 transmitters, allowing for flexible switching between multiple sources.

Figure 1: POFAN Q5-TX Wireless HDMI Transmitter. This image shows the compact, oval-shaped transmitter with a short USB-C cable and an HDMI male connector, featuring a central button and an indicator light.

2. Contingut del paquet

Si us plau, verifiqueu que tots els elements siguin presents al vostre paquet:

• POFAN Q5-TX Wireless HDMI Transmitter
• Manual d'usuari (aquest document)
• (Note: Receiver unit and other accessories are sold separately and are required for operation.)

3. Identificació de components

Figure 2: Diagram illustrating the components of the POFAN Wireless HDMI Receiver and Transmitter. The receiver unit is shown with ports for 3.5mm Audio Jack, USB-C Input, HDMI Port, VGA Port, Antennas, Power Indicator Light, and ON/OFF switch. The transmitter unit is shown with HDMI Male connector, Mesh Vent, USB-C Input, Signal Projection Switch, and Power Indicator Light.

Receiver (Example, sold separately)

1. Conector d'àudio de 3.5 mm
2. Entrada USB-C
3. Port HDMI
4. Port VGA
5. Antena
6. Smooth Glass Surface
7. Llum indicador d'alimentació
8. Interruptor ON/OFF

Transmitter (Q5-TX)

1. HDMI Male Connector
2. Vent de malla
3. USB-C Input (for power)
4. Signal Projection Switch (main button)
5. Llum indicador d'alimentació
6. Smooth Glass Surface

4. Instruccions de configuració i emparellament

The POFAN Q5-TX transmitter is designed for plug-and-play operation. It requires pairing with a compatible POFAN wireless receiver (ASIN: B09QKHKPCM or B09FPHWNHY) to function. Follow these steps to establish a connection:

Initial Pairing Process

1. Preparar el receptor: Ensure your POFAN receiver is powered on and connected to your display (TV, monitor, or projector) via HDMI or VGA.
2. Activate Receiver Pairing Mode: Locate the "Pairing Button" hole at the bottom of the receiver. Use a card pin or a similar thin object to press and hold this button for 5-8 seconds.
3. Confirm Receiver Status: Observe your display. The message "Ready to Pair" should appear on the TV screen, indicating the receiver is awaiting a connection.
4. Activate Transmitter Pairing Mode: Take your Q5-TX transmitter. Press and hold the main button (Signal Projection Switch) on the transmitter for approximately 5 seconds.
5. Confirm Transmitter Status: The indicator light in the middle of the transmitter will begin to flash. Release the button.
6. Emparellament automàtic: The transmitter and receiver will automatically attempt to pair. Once successful, the indicator light on the transmitter will become solid, and the display will show the transmitted content.

Figure 3: Visual guide for the initial pairing process. Step 1 shows pressing the pairing button on the receiver. Step 2 shows the "Ready to Pair" message on the TV screen. Step 3 shows pressing the button on the transmitter to initiate pairing.

Reset and Re-pairing Procedure

If you encounter issues or need to re-pair your transmitter, follow these steps:

Figure 4: Step-by-step guide for resetting and re-pairing the POFAN Wireless HDMI system. Step 1 illustrates inserting a thimble into the receiver's RESET position. Step 2 shows pressing the transmitter button for 3 seconds. Step 3 depicts the screen showing "Pairing" and waiting for connection. Step 4 indicates the transmitter indicator light remaining on for a successful connection.

1. Restablir el receptor: With the receiver powered on, insert a thimble or a similar thin object into the "RESET" position on the receiver. Hold for 3 seconds. The receiver will enter pairing mode.
2. Activate Transmitter Pairing: Press the main button on the transmitter for 3 seconds. The light status will become fast flashing, indicating it is ready to pair.
3. Monitor Pairing: The display screen will show "Pairing." Kindly wait for approximately 20 seconds for the connection to be established between the transmitter and receiver.
4. Confirmació de connexió: Once successfully paired, the transmitter indicator light will remain solid on.

5. Funcionament

Once the Q5-TX transmitter is successfully paired with a compatible receiver, operation is straightforward.

Connecting to Source Devices

The Q5-TX transmitter features an HDMI male connector. Simply plug it into the HDMI output port of your source device. Compatible devices include:

• PC (Desktop Computers)
• Portàtil
• Set-top box
• Gaming Consoles (PS3/PS4, Nintendo Switch)
• Càmeres
• DV (Digital Video Cameras)

The transmitter also has a USB-C input for power. Ensure it is connected to a power source (e.g., a USB port on your laptop or a USB power adapter) if your source device's HDMI port does not provide sufficient power.

Figure 5: This diagram illustrates the wide compatibility of the POFAN Wireless HDMI system. It shows various input devices (PC, Laptop, Set-top box, PS3/4, Nintendo Switch, Camera, DV) connecting to the transmitter, which then wirelessly transmits to the receiver, connected to output devices (Projector, Monitor, TV).

Multi-Transmitter Switching (Many-to-One Mode)

A single POFAN receiver can support up to 8 Q5-TX transmitters. This allows for seamless switching between multiple source devices connected to different transmitters, all displaying on the same receiver-connected screen.

1. Ensure all transmitters are paired with the receiver.
2. To switch between active transmitters, simply press the main button (Signal Projection Switch) on the desired transmitter. The receiver will automatically switch to display the content from that transmitter.
3. This operation allows for quick and efficient content sharing without reconnecting cables.

Figure 6: This image demonstrates the "Many-to-One Mode" feature, showing multiple laptops (each with a transmitter) wirelessly connecting to a single receiver, which is then connected to a large display, allowing for one-click switching between sources.

6. Manteniment

The POFAN Q5-TX Wireless HDMI Transmitter requires minimal maintenance. Follow these guidelines to ensure longevity and optimal performance:

• Neteja: Feu servir un drap suau i sec per netejar l'exterior del dispositiu. Eviteu utilitzar netejadors líquids o materials abrasius.
• Emmagatzematge: Guardeu el transmissor en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
• Manipulació: Manipuleu el dispositiu amb cura. Eviteu deixar-lo caure ni sotmetre'l a impactes forts.
• Potència: Always use the recommended power source (USB-C 5V) to power the transmitter if the HDMI source does not provide sufficient power.

7. Solució De Problemes

If you encounter issues with your POFAN Q5-TX Wireless HDMI Transmitter, please refer to the following troubleshooting tips:

• Sense senyal a la pantalla:
  • Ensure the transmitter is properly connected to the source device's HDMI output.
  • Verify the transmitter is receiving power (check the indicator light). If necessary, connect a USB-C power source.
  • Confirm the receiver is powered on and correctly connected to the display.
  • Ensure the display is set to the correct HDMI input channel.
  • Perform the re-pairing procedure as described in Section 4.
• Intermittent Signal or Poor Quality:
  • Reduir la distància entre l'emissor i el receptor.
  • Ensure there are no significant obstructions (walls, large metal objects) between the devices.
  • Minimize interference from other wireless devices operating on 2.4GHz or 5GHz frequencies.
  • Check if the source device's resolution is supported by the receiver and display.
• Transmitter Not Pairing:
  • Follow the "Initial Pairing Process" or "Reset and Re-pairing Procedure" carefully (Section 4).
  • Ensure the receiver is in "Ready to Pair" mode.
  • Confirm the transmitter's indicator light is flashing during its pairing attempt.
• Problemes d'àudio:
  • Verify that the source device is outputting audio via HDMI.
  • Check audio settings on your display or connected audio system.
  • Ensure the receiver's 3.5mm audio jack (if used) is connected correctly to an audio output device.

8. Especificacions

9. Garantia i Suport

POFAN is committed to providing high-quality products and excellent customer service. While specific warranty details are not provided in this manual, we encourage you to register your product on the official POFAN webo poseu-vos en contacte amb el nostre equip d'assistència per obtenir ajuda.

For technical support, troubleshooting, or warranty inquiries, please visit the POFAN Store on Amazon o consulteu la informació de contacte que us hem proporcionat amb la vostra compra.

Figure 7: The official POFAN brand logo.