Thule T2 Pro X Fat Tire Holder Instruction Manual

1. Introducció

The Thule T2 Pro X Fat Tire Holder is an upgrade kit designed to enable your Thule T2 Pro X platform hitch rack to securely transport fat bikes. This kit replaces the standard wheel holders, providing an optimized fit for tires up to 5 inches wide. It utilizes your existing rack hardware for installation.

2. Informació de seguretat

• Llegiu i enteneu sempre totes les instruccions abans de la instal·lació i l'ús.
• Ensure all components are correctly installed and securely fastened according to the instructions.
• Do not exceed the maximum weight capacity of your Thule T2 Pro X rack or your vehicle's hitch.
• Regularly check the security of the fat tire holders and the bike during transit.
• Be aware of the increased vehicle height and length when transporting bikes.
• Keep hands and clothing clear of moving parts during installation and loading/unloading.

3. Contingut del paquet

Verifiqueu que tots els components siguin presents abans de començar la instal·lació:

• 2 x Thule T2 Pro X Fat Tire Holders (Front Wheel Holders)

Nota: This kit uses existing hardware from your Thule T2 Pro X rack for installation.

4. Configuració i instal·lació

This kit is designed to replace the standard wheel holders on your Thule T2 Pro X platform hitch rack. The installation process involves removing the existing wheel holders and attaching the new fat tire holders using the same hardware.

4.1. Eines necessàries

• No additional tools are typically required beyond those used for initial rack assembly, as existing hardware is reused.

4.2. Passos d'instal·lació

1. Prepareu el bastidor: Ensure your Thule T2 Pro X rack is securely mounted to your vehicle's hitch and is in a stable position.
2. Remove Existing Holders: Locate the existing front wheel holders on your Thule T2 Pro X rack. Carefully unfasten the hardware (bolts, nuts, washers) that secures them to the rack arms. Retain all hardware.
3. Position New Holders: Place one Thule T2 Pro X Fat Tire Holder onto the rack arm, aligning the mounting holes with those on the rack.
4. Secure New Holders: Use the previously removed hardware to securely fasten the fat tire holder to the rack arm. Ensure all bolts are tightened firmly, but do not overtighten.
5. Repeat for Second Holder: Follow steps 3 and 4 for the second fat tire holder on the other rack arm.
6. Comprovació final: After installation, gently tug on each fat tire holder to ensure it is firmly attached and does not wobble.

This image displays the two specialized wheel holders included in the Thule T2 Pro X Fat Tire Holder kit. These holders are designed to accommodate wider fat bike tires, ensuring a secure fit on your Thule T2 Pro X platform hitch rack.

5. Instruccions de funcionament

Once the fat tire holders are installed, using your Thule T2 Pro X rack for fat bikes is similar to using it for standard bikes, with the added benefit of enhanced tire accommodation.

5.1. Loading a Fat Bike

1. Posicioneu el bastidor: Ensure the rack is in the loading position (if applicable) and clear of any obstructions.
2. Place the Bike: Lift your fat bike and place its wheels into the newly installed fat tire holders. The oversized design of these holders will cradle tires up to 5 inches wide.
3. Secure the Front Wheel: Engage the front wheel arm of your Thule T2 Pro X rack over the front wheel, pushing it down firmly until it secures the tire.
4. Secure the Rear Wheel: Use the rear wheel strap to firmly secure the rear wheel to its holder. Ensure the strap is tight and the wheel cannot move.
5. Comprovació de seguretat: Before driving, gently shake the bike to confirm it is securely held by both the front arm and rear strap. There should be minimal movement.

5.2. Unloading a Fat Bike

1. Release Rear Wheel: Unfasten the rear wheel strap.
2. Release Front Wheel: Disengage the front wheel arm from the front tire.
3. Remove Bike: Carefully lift the fat bike off the rack.

6. Manteniment

Proper maintenance ensures the longevity and safe operation of your Thule T2 Pro X Fat Tire Holders.

• Neteja: Clean the holders regularly with mild soap and water, especially after exposure to dirt, salt, or harsh weather conditions. Rinse thoroughly and dry.
• Inspecció: Periodically inspect the holders for any signs of wear, cracks, or damage. Check that all mounting hardware remains tight.
• Emmagatzematge: When not in use, store the rack and its accessories in a dry, protected area to prevent premature wear and environmental damage.

7. Solució De Problemes

8. Especificacions

• Número de model: 919505
• Marca: Thule
• Material: Plàstic
• Color: Negre
• Dimensions de l'article (L x A x A): 3.94 x 3.94 x 5.91 inches (approximate for individual holder)
• Pes de l'article: 0.5 Kilograms (for the kit)
• Capacitat de càrrega: Designed to support fat bikes within the Thule T2 Pro X rack's overall capacity (typically 50 kg per bike tray).
• Tipus de muntatge: Hitch Mount (accessory for hitch-mounted rack)
• UPC: 091021635814
• Compatibilitat: Thule T2 Pro X platform hitch racks
• Compatibilitat dels pneumàtics: Accommodates fat bike tires up to 5 inches wide.

9. Garantia i Suport

The Thule T2 Pro X Fat Tire Holder is covered by a Garantia limitada de per vida from Thule. This warranty covers defects in materials and workmanship. For specific warranty terms and conditions, please refer to the official Thule weblloc web o poseu-vos en contacte amb el servei d'atenció al client de Thule.

Per a més ajuda, assistència tècnica o per consultar sobre peces de recanvi, visiteu el lloc web oficial de Thule. website or contact their customer support department directly. You can find contact information and detailed FAQs on their weblloc: www.thule.com