Ravemen LS-CT03 CR800/TR30M USB Lightset Instruction Manual

1. Introducció

Thank you for choosing the Ravemen LS-CT03 CR800/TR30M USB Lightset. This lightset is designed to provide reliable and powerful illumination for your cycling needs, featuring an 800-lumen front light and a 30-lumen rear light. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new lightset to ensure optimal performance and longevity.

2. Contingut del paquet

Si us plau, verifiqueu que tots els elements que s'enumeren a continuació estiguin inclosos al vostre paquet:

• Ravemen CR800 Front Light
• Ravemen TR30M Rear Light
• Cable de càrrega USB
• Handlebar Mount (for CR800)
• Seat Post Mount (for TR30M)
• Wired Remote Button

3. Producte acabatview

Familiarize yourself with the components of your Ravemen lightset:

Image 3.1: The Ravemen LS-CT03 CR800/TR30M USB Lightset, including the CR800 front light, TR30M rear light, and associated mounting accessories.

3.1 CR800 Front Light

• Lent: Optical lens for efficient light distribution, including an optical low beam design.
• Botó d'encesa: Controls power and mode selection.
• Port de càrrega: Micro USB port for recharging.
• Port remot: Connects the wired remote button.
• Suport de muntatge: Integrated for handlebar attachment.

3.2 TR30M Rear Light

• Lent: Provides wide visibility.
• Botó d'encesa: Controls power and mode selection.
• Port de càrrega: Micro USB port for recharging.
• Suport de muntatge: Integrated for seat post attachment.

3.3 Wired Remote Button

• Botó: Allows for safe brightness adjustment without removing hands from the handlebar.
• Cable: Connects to the CR800 front light.

4. Configuració i instal·lació

4.1 Mounting the CR800 Front Light

1. Select a suitable position on your handlebar (22.2mm to 35mm diameter) that does not obstruct your view o controls.
2. Obriu el clamp of the handlebar mount.
3. Place the mount around the handlebar and securely tighten the screw until the mount is firm.
4. Slide the CR800 front light onto the mount until it clicks into place. Ensure it is securely fastened.
5. Adjust the light angle to illuminate the path ahead without blinding oncoming traffic.

4.2 Mounting the TR30M Rear Light

1. Attach the TR30M rear light to your seat post using the provided strap or integrated mount.
2. Ensure the light is facing directly backward and is visible to following traffic.

4.3 Connecting the Wired Remote Button

1. Locate the remote port on the CR800 front light.
2. Plug the wired remote button's cable into this port.
3. Position the remote button on your handlebar in an easily accessible location, typically near your grip.

5. Instruccions de funcionament

5.1 Càrrega dels llums

Both the CR800 and TR30M lights are rechargeable via Micro USB.

1. Connect the provided USB cable to the charging port on each light.
2. Plug the other end of the USB cable into a USB power source (e.g., computer, USB wall adapter).
3. El llum indicador del dispositiu mostrarà l'estat de càrrega (per exemple, vermell per a la càrrega, verd per a la càrrega completa).
4. Charging time may vary. Ensure lights are fully charged before first use.

5.2 Power On/Off and Mode Selection (CR800 Front Light)

• Encès: Premeu i manteniu premut el botó d'engegada durant aproximadament 1 segon.
• Mode Cycle: Short press the power button to cycle through brightness modes (e.g., High, Medium, Low, Flash). The CR800 features an optical low beam for commuting and a daylight visible flash mode.
• Apagar: Premeu i manteniu premut el botó d'engegada durant aproximadament 1 segon.
• Circuit de memòria intel·ligent: The light will power on in the last used brightness mode.

5.3 Power On/Off and Mode Selection (TR30M Rear Light)

• Encès: Premeu i manteniu premut el botó d'engegada durant aproximadament 1 segon.
• Mode Cycle: Short press the power button to cycle through various flash and steady modes.
• Apagar: Premeu i manteniu premut el botó d'engegada durant aproximadament 1 segon.

5.4 Using the Wired Remote Button

The wired remote button allows for convenient brightness adjustment of the CR800 front light while riding.

• Ajust de brillantor: Short press the remote button to cycle through brightness modes.
• Instant Max Output: Press and hold the remote button for instant maximum brightness (if applicable to the current mode).

6. Manteniment

6.1 Neteja

Netegeu el cos de la llum i la lent amb un drap suau iamp drap. No utilitzeu productes de neteja abrasius ni dissolvents, ja que poden danyar l'acabat o la lent.

6.2 Cura de la bateria

• Charge the lights regularly, especially if not used for extended periods, to maintain battery health.
• Eviteu descarregar completament la bateria amb freqüència.
• Guardeu les llums en un lloc fresc i sec quan no s'utilitzin.

6.3 Resistència a l'aigua

The lightset has an IPX6 waterproof rating, meaning it is protected against high-pressure water jets from any direction. It is suitable for use in heavy rain but should not be submerged in water.

7. Solució De Problemes

• La llum no s'encén: Ensure the battery is charged. Press and hold the power button for the specified duration (approx. 1 second).
• La llum no es carrega: Check the USB cable connection and the power source. Ensure the charging port is clean and free of debris.
• Llum parpellejant o tènue: Pot ser que la bateria estigui baixa. Recarrega el llum.
• Wired remote not working: Ensure the remote cable is securely plugged into the CR800 front light's remote port.
• Mounting issues: Ensure the mount is securely tightened to the handlebar/seat post and the light is properly clicked into the mount.

8. Especificacions

9. Garantia i Suport

For warranty information and customer support, please refer to the official Ravemen weblloc web o poseu-vos en contacte amb el vostre distribuïdor local. Conserveu el rebut de compra com a comprovant de compra.

You can find more information about Ravemen products at the official Ravemen Store.

10. Vídeos oficials de productes

En aquest moment no hi ha vídeos oficials del venedor disponibles per incrustar.