1. Producte acabatview
The iFlight XING2 2205 3200KV motor is designed for high-performance FPV drone applications, particularly suited for 3.5-inch cinewhoop drones like the Protek35. This motor features robust construction and advanced design elements to ensure durability and efficient operation.
Característiques principals:
- Eix: 5mm titanium alloy shaft for enhanced strength.
- Campana: Crash-resistant 7075 aluminum bell.
- Rodaments: Smooth and long-lasting NSK 8x3x4 bearings.
- Imants: Center slotted N52H curved arc magnets for improved performance.
- Protecció: XING O-ring bearing gap protection and motor wire protector.
- Balanç: Dynamically balanced for smooth operation.
Figura 1: Frontal view of the XING2 2205 motor, highlighting the durable aluminum bell and internal components.
Figura 2: Detallada views of the motor's components, including the shaft, bearings, and winding structure.
2. Especificacions
| Especificació | Detall |
|---|---|
| Model | XING2 2205 |
| Classificació KV | 3200KV |
| Versió | CW Screw Thread |
| Entrada Voltage | Lipo 4S |
| Configuració | 12N14P |
| Stator Diameter | 22 mm |
| Stator Length | 5 mm |
| Pes | 12.5g (with short wire) / 24.6g (total item weight) |
| Longitud del cable | 20AWG 160 mm |
| Patró de muntatge | 12x12mm |
| Edat recomanada | 15 anys i més |
Figure 3: Technical datasheet providing detailed specifications and performance curves.
Figure 4: The motor's weight as measured on a digital scale.
3. Contingut del paquet
En obrir el paquet, comproveu que tots els components hi siguin presents i que no estiguin danyats.
- 4x XING2 2205 3200KV Brushless Motors
- 16 x M2 * 6 cargols
Note: Propellers are not included in this package.
Figure 5: Package contents including the motor, mounting screws, and propeller nut.
4. Instal·lació i configuració
4.1 Muntatge del motor
- Ensure your drone frame has a 12x12mm mounting pattern for the motors.
- Align the motor's mounting holes with the corresponding holes on the drone arm.
- Secure the motor using the provided M2*6 screws. Do not overtighten to avoid damaging the motor or frame.
Figura 6: A baix view of the motor, illustrating the 12x12mm mounting pattern.
4.2 Cablejat
The motor comes with 20AWG 160mm wires. Connect these wires to your Electronic Speed Controller (ESC) according to your ESC's instructions. Typically, the three motor wires connect directly to the three phase wires of the ESC. Ensure proper soldering for a secure and reliable connection.
5. Funcionament
5.1 Instal·lació de l'hèlix
This motor features a CW (Clockwise) screw thread. Attach your propellers securely using the provided propeller nuts. Ensure the propellers are balanced and installed in the correct direction for your drone's rotation.
5.2 Font d'alimentació
The XING2 2205 3200KV motor is designed for 4S LiPo battery input voltage. Using a battery with a different voltage may result in suboptimal performance or damage to the motor and ESC.
5.3 Comprovacions inicials
Before your first flight, perform a motor direction check in your flight controller software. Ensure all motors spin freely and in the correct direction. Verify that no wires are pinched and all connections are secure.
6. Manteniment
- Neteja: Regularly inspect and clean the motors to remove dirt, dust, and debris that can accumulate in the bell or around the bearings. Use compressed air or a soft brush.
- Inspecció de rodaments: Check the bearings for any signs of wear, roughness, or excessive play. Worn bearings can lead to vibrations and reduced motor efficiency. Replace bearings if necessary.
- Propeller Balance: Ensure propellers are always balanced. Unbalanced propellers can cause excessive vibration, leading to premature motor wear and unstable flight.
- Integritat del cable: Periodically check motor wires for any cuts, fraying, or loose connections. Repair or replace damaged wires promptly.
7. Solució De Problemes
- El motor no gira: Check ESC connection, flight controller settings, and ensure no physical obstructions. Verify motor wires are not shorted.
- Vibració excessiva: Inspect propellers for damage or imbalance. Check motor bearings for wear. Ensure motors are securely mounted.
- Soroll inusual: Could indicate worn bearings, debris inside the motor, or a loose propeller. Disassemble and inspect if necessary.
- Sobreescalfament: Ensure proper airflow. Check for short circuits or incorrect ESC settings. Over-propping can also cause overheating.
8. Garantia i Suport
iFlight products are manufactured to high standards. For warranty claims or technical support, please contact your retailer or iFlight directly through their official website. Keep your proof of purchase for any warranty-related inquiries.