ChunHee Wireless Emergency Call Button System

1. Introducció

This manual provides detailed instructions for the ChunHee Wireless Emergency Call Button System, Model CE01. This system is designed to provide reliable assistance for seniors, patients, or anyone needing quick support. It includes a plug-in receiver and a portable, waterproof call button transmitter, ensuring help is always within reach.

2. Producte acabatview

2.1 Components

• Receptor: Plugs into a standard electrical outlet. Emits an audible alarm and flashes an LED when the call button is pressed.
• Transmitter (Call Button): A wearable or mountable button that sends a wireless signal to the receiver when pressed.
• Cordó: For wearing the transmitter around the neck.
• Adhesive Pads: For mounting the transmitter on surfaces.

2.2 Característiques clau

• Reliable Assistance: Provides timely alerts to caregivers.
• De llarg abast: Up to 150 meters (500 feet) in open areas, and approximately 50 meters (165 feet) indoors, capable of penetrating walls and floors.
• Volum ajustable: 5 levels, from 0 to 115 dB, ensuring clear detection.
• 55 tons de trucada: Una varietat de melodies per triar.
• Transmissor impermeable IP55: Splash-proof design suitable for use in bathrooms (do not immerse in water).
• Avís de bateria baixa: Transmitter LED flashes five times consecutively when the battery is low.
• Disseny fàcil d'utilitzar: Large, accessible call button.
• Sistema ampliable: Supports pairing with multiple receivers and transmitters.

This image displays the two main components of the ChunHee Wireless Emergency Call Button System: the plug-in receiver and the wearable call button transmitter.

This image details the receiver's buttons for ringtone selection (forward/backward), volume adjustment, LED light, and speaker. It also shows the transmitter with its lanyard, indicator light, and call button area, along with their respective dimensions.

3. Instruccions de configuració

3.1 Instal·lació del receptor

1. Plug the receiver into a standard electrical outlet in a central location where the alert can be easily heard.
2. Ensure the outlet is easily accessible and not obstructed.

3.2 Preparing the Transmitter

1. The transmitter comes with a pre-installed 12V 23A battery. If replacing, ensure correct polarity.
2. Attach the lanyard if you plan to wear the button around the neck.
3. Alternatively, use the provided adhesive pads to fix the button to a convenient surface, such as a bedside table or bathroom wall.

3.3 Pairing Transmitter with Receiver

The system is typically pre-paired. If re-pairing or adding new transmitters/receivers, follow these steps:

1. Plug the receiver into an electrical outlet.
2. Manteniu premut el botó Botó de volum on the receiver for approximately 5 seconds until the LED indicator on the receiver starts flashing. This indicates it is in pairing mode.
3. While the receiver LED is flashing, press the Botó de trucada al transmissor.
4. The receiver will emit a sound to confirm successful pairing.
5. Repeat for additional transmitters if necessary.

This image illustrates the pairing process: plug in the receiver, press and hold the volume button until the LED flashes, then press the call button on the transmitter. The receiver will sound to confirm successful pairing.

4. Instruccions de funcionament

4.1 Triggering an Emergency Call

To send an alert, simply press the large Botó de trucada on the transmitter. The transmitter's LED will flash, and the receiver will sound its alarm and flash its LED.

4.2 Ajust del volum

On the receiver, press the Botó de volum repeatedly to cycle through the 5 available volume levels (0-115 dB). Select the desired volume.

4.3 Canviar els tons de trucada

On the receiver, use the Ringtone Forward (▲) i Ringtone Backward (▼) buttons to cycle through the 55 available melodies. The receiver will play a preview of each ringtone as you select it.

To change the ringtone, press the forward or backward ringtone button on the receiver to cycle through the 55 available melodies.

4.4 Indicació de bateria baixa

When the transmitter's battery is low, its LED indicator will flash five times consecutively after a button press. This signals that the battery needs to be replaced soon.

5. Manteniment

5.1 Battery Replacement (Transmitter)

When the low battery warning appears, replace the 12V 23A battery in the transmitter. To do this, carefully open the transmitter casing, remove the old battery, and insert a new one, ensuring correct polarity. Close the casing de manera segura.

5.2 Neteja

Wipe the receiver and transmitter with a soft, dry cloth. Do not use abrasive cleaners or immerse the transmitter in water, despite its splash-proof rating.

5.3 Resistència a l'aigua

The transmitter is IP55 rated, meaning it is protected against low-pressure water jets from any direction. It is suitable for use in a shower environment but should not be submerged in water.

6. Solució De Problemes

• Receiver does not sound when button is pressed:
  • Ensure the receiver is properly plugged into a working electrical outlet.
  • Check if the receiver's volume is set to an audible level (not 0).
  • Verify the transmitter's battery is not depleted (check for low battery warning).
  • Re-pair the transmitter with the receiver (refer to Section 3.3).
  • Assegureu-vos que el transmissor estigui dins del rang del receptor.
• Transmitter LED does not light up:
  • Replace the 12V 23A battery in the transmitter.
• Poor range or intermittent signal:
  • Recol·loca el receptor a una posició més central.
  • Avoid placing the receiver or transmitter near large metal objects or other electronic devices that may cause interference.
  • Ensure the transmitter battery is not low.
• To clear all pairings:
  1. Unplug the receiver from the electrical outlet.
  2. Manteniu premut el botó Ringtone Forward (▲) button on the receiver.
  3. While holding the button, plug the receiver back into the outlet.
  4. Continue holding the button for approximately 5 seconds until the LED flashes rapidly, then release. This will clear all previously paired transmitters. You will need to re-pair any transmitters you wish to use.

To clear all pairings, unplug the receiver, then press and hold the forward ringtone button while plugging it back in. Hold for 5 seconds until the LED flashes rapidly, then release. This resets all pairings.

7. Especificacions

8. Informació de la garantia

This product comes with a standard manufacturer's warranty. Please refer to the product packaging or the official ChunHee weblloc web per conèixer els termes i condicions específiques de la garantia.

9. Suport

For further assistance, technical support, or inquiries regarding your ChunHee Wireless Emergency Call Button System, please visit the official ChunHee website or contact their customer service department. Contact details can typically be found on the product packaging or the brand's online presence.