Manual d'usuari del sensor de cadència/velocitat GEOID CS600

1. Introducció

The GEOID CS600 is a versatile 2-in-1 sensor designed to accurately measure either cycling cadence or speed. It utilizes both ANT+ and Bluetooth wireless protocols, ensuring broad compatibility with various bike computers, sport watches, and smartphone applications. This manual provides comprehensive instructions for the proper setup, installation, operation, maintenance, and troubleshooting of your CS600 sensor.

Image 1.1: The GEOID CS600 Cadence/Speed Sensor, a compact black device with the GEOID logo and a small red indicator light.

2. Informació de seguretat

ADVERTÈNCIA: PERILL D'INGESTIÓ

This product contains a button cell or coin battery. DEATH or serious injury can occur if ingested. A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours. Keep new and used batteries OUT OF REACH OF CHILDREN. Seek immediate medical attention if a battery is swallowed or inserted inside any part of the body.

Image 2.1: Front of the GEOID CS600 packaging, displaying a prominent warning regarding the button cell battery.

3. Contingut del paquet

Verifiqueu que tots els elements que s'enumeren a continuació s'inclouen al paquet del producte:

• CS600 Sensor x1
• Flat Rubber Pad x1
• Large Rubber Ring (for Hub installation) x1
• Small Rubber Ring (for Crank Arm installation) x1
• CR2032 Battery (pre-installed in sensor) x1
• Manual d'inici ràpid x1

Image 3.1: Visual representation of all components included in the GEOID CS600 sensor package.

4. Característiques del producte

• Funcionalitat 2 en 1: Operates as either a speed sensor or a cadence sensor.
• Suport de protocol dual: Compatible with both ANT+ and standard Bluetooth protocols for wide device connectivity.
• Alta compatibilitat: Works with most bike computers, sport watches, and iOS/Android applications.
• IP66 impermeable i resistent a la pols: Designed to withstand rain, dust, and sweat, ensuring reliable performance in various conditions.
• Llarga vida útil de la bateria: Up to 500 hours of working time with a replaceable CR2032 battery.
• Geomagnetic Sensor: Utilizes advanced technology for accurate data detection.

Imatge 4.1: acabatview of the CS600's key features, including ANT+ & Bluetooth, IP66 waterproof rating, geomagnetic sensor, 500-hour battery life, and speed/cadence modes.

Imatge 4.2: Detallada view highlighting the IP66 waterproof rating and the 500-hour replaceable battery life of the CS600 sensor.

5. Getting Started: Battery & Mode Switching

The CS600 sensor operates in two distinct modes: Cadence Mode and Speed Mode. The mode is determined by the color of the indicator light when the battery is reinstalled.

5.1. Battery Installation and Mode Selection

1. Open the battery cover by twisting it counter-clockwise.
2. Introduïu la pila CR2032 amb el costat positiu (+) cap amunt.
3. To switch modes, remove the battery and reinsert it. The sensor will flash either RED or GREEN.
   • If the indicator flashes VERMELL, the sensor is in Mode de cadència.
   • If the indicator flashes VERD, the sensor is in Mode de velocitat.
4. Close the battery cover by twisting it clockwise until it is securely sealed.

Nota: After switching modes, you may need to reconnect the device to your bike computer or app to display the correct data.

Image 5.1: Illustration showing the GEOID CS600 sensor with a red indicator for Cadence Mode and a green indicator for Speed Mode, activated by reinstalling the battery.

Imatge 5.2: Primer pla view of the GEOID CS600 sensor's battery compartment, showing the CR2032 battery and its placement.

6. Installation on Bicycle

The installation method differs based on whether you intend to use the sensor for cadence or speed measurement.

6.1. Cadence Mode Installation

In Cadence Mode, the sensor measures your pedaling revolutions per minute (RPM).

1. Ensure the sensor is set to Cadence Mode (RED indicator flash).
2. Attach the sensor to the left inner crank arm of your bicycle using the small rubber ring.
3. Position the sensor securely so it does not interfere with pedaling or other bike components.

6.2. Speed Mode Installation

In Speed Mode, the sensor measures your bicycle's speed.

1. Ensure the sensor is set to Speed Mode (GREEN indicator flash).
2. Attach the sensor to the front wheel hub of your bicycle using the large rubber ring.
3. Ensure the sensor is firmly attached and does not obstruct wheel rotation.

Image 6.1: Diagram illustrating the correct installation positions for the GEOID CS600 sensor in Cadence Mode (on the crank arm) and Speed Mode (on the front wheel hub).

7. Connectivity & Operation

The CS600 sensor supports both ANT+ and Bluetooth protocols, allowing connection to a wide range of devices.

7.1. Vinculació amb dispositius

1. Ensure the CS600 sensor is awake. You can wake it by rotating the crank arm (for cadence) or the wheel (for speed) a few times. The indicator light will flash.
2. On your bike computer, sport watch, or smartphone app, navigate to the sensor pairing or add device menu.
3. Select to search for new sensors. The CS600 should appear in the list of available devices (e.g., as "GEOID CS600" or similar).
4. Select the sensor to pair. Once connected, the indicator light on the sensor may change or stop flashing, depending on the mode and connection status.

7.2. Dual Protocol Functionality

The CS600 can transmit data via both ANT+ and Bluetooth simultaneously, allowing you to connect to multiple devices at once (e.g., a bike computer via ANT+ and a smartphone app via Bluetooth).

Image 7.1: Visual demonstrating the CS600's compatibility with various ANT+ and Bluetooth devices, including bike computers, sport watches, and popular cycling apps like OnelapFit, Wahoo, Zwift, and Rouvy.

8. Manteniment

8.1. Substitució de la bateria

When the sensor's performance degrades or it fails to connect, the CR2032 battery may need replacement. Follow the steps in Section 5.1 to replace the battery.

8.2. Neteja i cura

• Netegeu el sensor amb un anunciamp cloth after use, especially if exposed to sweat, dirt, or rain.
• Do not use abrasive cleaners or solvents, as these can damage the sensor's casing o segells.
• Ensure the battery cover is always securely closed to maintain the IP66 waterproof rating.
• Guardeu el sensor en un lloc fresc i sec quan no l'utilitzeu.

9. Solució De Problemes

If you encounter issues with your CS600 sensor, try the following troubleshooting steps:

If the issue persists after trying these steps, please contact GEOID customer support.

10. Especificacions tècniques

Image 10.1: Back of the GEOID CS600 packaging, detailing technical specifications such as cadence range, speed range, battery type, battery life, and sensor dimensions.

11. Garantia i atenció al client

11.1. Informació de la garantia

The GEOID CS600 sensor comes with a 1 anys de garantia des de la data de compra. Aquesta garantia cobreix els defectes de fabricació i els mals funcionaments en condicions d'ús normal. No cobreix els danys causats per un mal ús, accidents, modificacions no autoritzades o instal·lació incorrecta.

11.2. Atenció al client

For any questions, technical assistance, or warranty claims, please contact GEOID customer service. We are committed to providing 24-hour customer service and lifetime after-sales support.

• Correu electrònic: info@geoidsports.com
• Weblloc: www.geoidsports.com

Please have your product model (CS600) and purchase information ready when contacting support.