Instruccions importants de seguretat
Si us plau, llegiu i enteneu totes les instruccions abans de muntar i utilitzar aquest producte. Conserveu aquest manual per a futures consultes.
- Assegureu-vos que la font d'alimentació voltage coincideix amb la lampRequisits de (240 volts).
- No exposa la lamp a l'aigua o a la humitat elevada.
- Desendolleu la lamp de la presa de corrent abans de netejar o realitzar qualsevol manteniment.
- No intenteu modificar ni reparar elamp Poseu-vos en contacte amb personal de servei qualificat per obtenir ajuda.
- Mantingueu la lamp lluny de fonts de calor i de la llum solar directa.
- Aquesta lamp és només per a ús interior.
Contingut del paquet
Verifiqueu que tots els components siguin presents abans del muntatge:
This image displays all components included in the FIMEI Floor Lamp package: the main lamp body (disassembled poles and light heads), the round base, the power adapter (EU plug shown), the remote control, and the user manual.
- Lamp Body (multiple pole sections and light heads)
- Base Rodona
- Adaptador de corrent (endoll UE)
- Control remot
- Manual d'usuari
Instruccions de muntatge
The FIMEI Floor Lamp is designed for easy assembly without additional tools.
- Desembaleu amb cura tots els components de l'embalatge.
- Place the round base on a flat, stable surface.
- Hold the main light pole section and begin assembling the lamp poles from top to bottom, screwing each section clockwise until secure. Ensure the wire is not damaged by excessive pulling during this process.
- Connecteu l'adaptador d'alimentació a lamp and then plug it into a suitable electrical outlet.
This diagram illustrates the lamp's dimensions (187 cm height, 25 cm base diameter) and the flexibility of its light heads. The main semi-rings can rotate 330 degrees vertically and horizontally, while the smaller reading lamp is freely adjustable.
Instruccions de funcionament
Encès/Apagat
El lamp can be turned on or off using either the touch control panel on the lamp pole or the remote control.
- Control tàctil: Tap the power icon on the lamp pal.
- Comandament a distància: Premeu el botó Poder (⏻) botó.
Ajust de la brillantor (atenuació)
El lamp supports continuous dimming from 5% to 100% brightness.
- Control tàctil: Use the brightness adjustment icons on the lamp pal.
- Comandament a distància: Utilitza el Brightness Up (☀) i Brightness Down (☼) botons.
This image illustrates the stepless dimming capability, showing the lamp's light output ranging from a low 5% brightness to a full 100% brightness, allowing for precise light intensity adjustment.
Ajust de la temperatura del color
El lamp offers four color temperature settings: 3000K, 4000K, 5000K, and 6000K.
- Control tàctil: Use the color temperature adjustment icons on the lamp pal.
- Comandament a distància: Utilitza el CTC+ i CCT- buttons to cycle through or fine-tune color temperatures.
This visual demonstrates the four distinct color temperature settings available: 3000K for a warm, cozy ambiance; 4000K for a balanced warm white; 5000K for a bright natural white; and 6000K for a cool, slightly blue daylight white.
Using Touch Control
The touch control panel is located on the main lamp pole. It allows independent control of the main lamp and the reading light.
- Tap the respective power icon to turn on/off the main lamp or reading light.
- Use the dedicated brightness and color temperature icons for each light source.
Ús del control remot
The remote control allows convenient operation from up to 32 feet (10 meters) away. It features a magnetic design for easy storage on the lamp pal.
This image highlights the dual control options: a touch-sensitive panel located on the lamp's main pole for direct adjustments, and a remote control for convenient operation from a distance. The remote control has a magnetic design for easy storage on the lamp.
El comandament a distància requereix 2 piles AAA (no incloses).
Vinculació del comandament a distància
If the remote control does not respond, it may need to be paired with the lamp:
- Assegureu-vos que lamp is plugged in but turned off.
- Enceneu la lamp.
- Immediately after turning on (within 3 seconds), press and hold the Poder (⏻) botó del comandament a distància.
- El lamp will flash to indicate successful pairing.
This image shows the steps to pair the remote control with the lamp. To pair, turn off the lamp, then turn it on and immediately press and hold the 'ON' button on the remote within 3 seconds until the lamp flashes, indicating successful pairing.
Ajustant Lamp Caps
The main semi-rings and the reading light are adjustable:
- The main semi-rings can be rotated 330 degrees vertically and horizontally to direct light as desired.
- The smaller reading light is freely adjustable on its flexible arm.
Manteniment
- Neteja: Desconnecteu l'alimentació abans de netejar. Feu servir un drap suau i sec per netejar la superfície.amp. No utilitzeu netejadors abrasius ni dissolvents.
- Substitució de bombetes: The LED light source is integrated and not user-replaceable. If the light source fails, contact customer support.
- Emmagatzematge: Si emmagatzema la lamp, disassemble it carefully (from base to main light) and store in its original packaging in a dry place.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Lamp no s'encén. | Sense font d'alimentació. Lamp not properly assembled. |
Check if the power adapter is securely plugged into the wall outlet and the lamp. Assegureu-vos que totes les seccions del pal estiguin ben cargolades. |
| El comandament a distància no funciona. | Les piles estan gastades o incorrectament inserides. Remote is not paired with the lamp. Obstrucció entre remot i lamp. |
Replace batteries (2x AAA) and ensure correct polarity. Follow the "Pairing the Remote Control" instructions. Assegureu-vos una línia de visió clara cap a lampel receptor. |
| La llum parpelleja o és inestable. | Connexió fluixa. Fluctuacions de potència. |
Check all connections. Try plugging the lamp into a different outlet. If the problem persists, contact support. |
Especificacions
| Característica | Detall |
|---|---|
| Marca | FIMEI |
| Número de model | 1 (MF18813) |
| Dimensions del producte (L x A x A) | 30 x 30 x 175 cm |
| Pes de l'article | 4 quilos |
| Material | Metall (base), plàstic (ombra) |
| Color | Gris |
| Voltage | 240 Volts |
| Wattage | 20 watts |
| Tipus de bombeta | LED integrat |
| Temperatura de color | 3000K (Warm), 4000K (Cool White), 5000K (Daylight White), 6000K (Slightly Blue Daylight White) |
| Característiques especials | Dimmable, Adjustable Color Temperature, Remote Control, Touch Control, Rotatable Light Heads |
| Estil de commutació | Push Button (Touch Control) |
| Classe d'eficiència energètica | F |
| Consum d'energia | 27 kWh/1000h |
Per obtenir informació més detallada sobre energia, consulteu la base de dades EPREL de la UE: https://eprel.ec.europa.eu/qr/1500204
This is the official EU energy label for the FIMEI Floor Lamp, model MF18813. It indicates an energy efficiency class of F and an energy consumption of 27 kilowatt-hours per 1000 hours of operation. A QR code is also present for more information.
Garantia i Suport
FIMEI products are designed for quality and durability. For warranty information or technical support, please contact your retailer or visit the official FIMEI weblloc.
Si us plau, conserveu el comprovant de compra per a qualsevol reclamació de garantia.
For further assistance, please refer to the contact information provided with your purchase or on the FIMEI brand store page.