1. Introducció
This manual provides essential instructions for the safe and effective use of the Total TAC2211155 Metal Cutting Barrels. Please read this manual thoroughly before use and retain it for future reference. These cutting barrels are designed for metal cutting applications with compatible angle grinders.
2. Informació de seguretat
AVÍS: Si no es segueixen aquestes instruccions de seguretat, es poden produir lesions greus o danys materials.
- Utilitzeu sempre l'equip de protecció individual (EPI) adequat, com ara ulleres de seguretat, protecció auditiva, guants i una màscara antipols.
- Ensure the cutting barrel is compatible with your angle grinder's maximum RPM and arbor size.
- Inspect the cutting barrel for damage (cracks, chips, deformation) before each use. Do not use damaged discs.
- Fixeu la peça de treball fermament per evitar que es mogui durant el tall.
- Never force the cutting barrel into the material. Allow the disc to cut at its own pace.
- Avoid cutting near flammable materials. Sparks are generated during operation.
- Assegureu-vos una ventilació adequada a la zona de treball.
- Mantenir els espectadors a una distància segura.
- Disconnect the angle grinder from the power source before changing discs or performing maintenance.
3. Producte acabatview
The Total TAC2211155 set includes 10 metal cutting barrels, designed for efficient and precise cutting of various metal types. Each barrel features an aluminum oxide abrasive material and a bonded construction for durability.
Figure 1: Individual Total Metal Cutting Barrel. This image displays a single cutting disc, highlighting its design and specifications printed on its surface.
Figure 2: Set of 10 Total Metal Cutting Barrels in their protective metal storage box. The image shows the compact packaging for the set of ten discs.
4. Configuració
- Prepareu la esmoladora angular: Ensure your angle grinder is unplugged and the spindle lock is engaged.
- Remove Old Disc (if applicable): Use the appropriate wrench to loosen the flange nut and remove any existing disc.
- Inspect New Disc: Carefully examine the Total TAC2211155 cutting barrel for any signs of damage before mounting.
- Mount the Disc: Place the cutting barrel onto the grinder's spindle, ensuring it sits flush against the inner flange. The label side of the disc should face outwards.
- Assegureu el disc: Thread the outer flange nut onto the spindle and tighten it firmly with the wrench. Do not overtighten.
- Adjust Guard: Position the safety guard to provide maximum protection during operation.
5. Instruccions de funcionament
- Encès: Plug in the angle grinder.
- Inicia el molinet: Turn on the angle grinder and allow the disc to reach full operating speed before contacting the workpiece.
- Iniciar tall: Gently bring the edge of the cutting barrel into contact with the material at a shallow angle (typically 15-30 degrees for cutting).
- Mantenir una pressió constant: Apply consistent, moderate pressure. Let the disc do the work. Excessive force can lead to disc breakage or premature wear.
- Follow Cut Line: Guide the grinder along the desired cut line.
- Evitar l'enquadernació: Ensure the cut kerf remains open to prevent the disc from binding. If the disc binds, release the trigger immediately.
- Tall final: Continue cutting until the material is separated.
- Apagar: Turn off the angle grinder and wait for the disc to stop rotating completely before setting the tool down.
6. Manteniment i emmagatzematge
- Inspecció: Before each use, visually inspect the cutting barrel for any cracks, chips, or signs of wear. Discard any damaged discs immediately.
- Neteja: Keep the discs free from grease, oil, and debris.
- Emmagatzematge: Store the cutting barrels in their original metal box in a dry, cool place, away from direct sunlight and moisture. Proper storage helps maintain their integrity and performance.
- Manipulació: Handle discs carefully to avoid dropping or impacting them, which can cause unseen damage.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Disc breaks or shatters | Excessive side pressure, disc binding, damaged disc, incorrect RPM. | Use appropriate pressure, ensure workpiece is secure, inspect disc before use, verify grinder RPM matches disc rating. |
| Slow cutting or excessive heat | Worn disc, incorrect disc for material, insufficient power from grinder. | Replace disc, ensure disc is suitable for the material, check grinder's power output. |
| Vibració excessiva | Improperly mounted disc, damaged disc, worn grinder components. | Re-mount disc correctly, inspect disc for damage, check grinder for issues. |
8. Especificacions
| Característica | Detall |
|---|---|
| Marca | TOTAL |
| Número de model | TAC2211 |
| Número de part | 40921 |
| Diàmetre del disc | 115 mm |
| Gruix del disc | 1.2 mm |
| Diàmetre del forat de l'arbre | 22 mm |
| Material de sorra | Òxid d'alumini |
| Grit Rating | 120 (mitjana) |
| Tipus de construcció | Vinculat |
| Dispositius compatibles | Esmoladora angular |
| Quantitat de paquet | 10 peces |
| Embalatge | Caixa metàl·lica |
| Pes de l'article (conjunt) | 315 g |
9. Garantia i Suport
For specific warranty information or technical support regarding your Total TAC2211155 Metal Cutting Barrels, please refer to the packaging or contact Total customer service directly. As these are consumable items, warranty typically covers manufacturing defects only.
For general inquiries, you may visit the official Total Tools weblloc web o poseu-vos en contacte amb el vostre distribuïdor local.