Kodak T455 Tripod with H4444 Head Instruction Manual

Introducció

Thank you for choosing the Kodak T455 Tripod with H4444 Head. This heavy-duty aluminum tripod is designed for professional photo and video applications, offering stability, smooth operation, and versatility. This manual provides essential information for the proper setup, operation, and maintenance of your tripod to ensure optimal performance and longevity.

Contingut del paquet

Verifiqueu que tots els elements siguin presents al vostre paquet:

• 1 x Kodak T455 Tripod with H4444 Head
• 1 x Carry Case (for travel)

Configuració

Follow these steps to set up your Kodak T455 Tripod:

1. Desempaquetar el trípode: Carefully remove the tripod from its carry case and packaging.
2. Estirar les cames: Unlock the flip locks on each of the four leg sections. Extend the legs to the desired height. Ensure all flip locks are securely closed after adjusting to prevent accidental collapse.
3. Ajustar l'angle de les cames: The tripod legs can be independently adjusted to different angles for stability on uneven surfaces. Press the leg angle release tab at the top of each leg to adjust.
4. Anivellar el trípode: Use the built-in bubble level on the tripod head to ensure the base is level before mounting your camera.
5. Adjuntar la càmera:
   

   Image: The quick release plate with a 1/4 inch universal screw for camera attachment.

   • Locate the quick release plate on the H4444 head.
   • Press the release lever to detach the quick release plate from the head.
   • Attach the quick release plate to the bottom of your camera using the 1/4-inch universal screw. Ensure it is tightened securely.
   • Slide the camera with the attached quick release plate back into the tripod head until it clicks into place. Verify that it is firmly locked.

Instruccions de funcionament

The Kodak T455 Tripod is designed for flexible and smooth camera movements.

Ajust d'alçada

Image: The tripod extended to its maximum height of 168.45 cm and collapsed to its minimum height of 61.95 cm.

• The tripod can be adjusted from a minimum height of 61.95 cm to a maximum height of 168.45 cm.
• To adjust, open the flip locks on the leg sections, extend or retract the legs to the desired height, and then firmly close the flip locks.

Using the H4444 Fluid Head

Image: The H4444 fluid head with a 360-degree rotation indicator for panoramic shooting.

• The H4444 head features hydraulic damping for smooth panning and tilting movements.
• Moviment de panoràmica: Loosen the pan lock knob to rotate the head horizontally (360 degrees) for panoramic shots. Tighten to secure.
• Moviment d'inclinació: Loosen the tilt lock knob to adjust the camera's vertical angle. Tighten to secure.
• The long handle provides precise control over movements.

Capacitat de pes

Image: An illustration showing the tripod's ability to support up to 20 kg of equipment.

• The tripod supports equipment up to 20 kg, making it suitable for DSLRs, cinema cameras, and other professional gear.
• Always ensure your equipment's weight does not exceed the maximum load capacity.

Bearing Hook

Imatge: Un primer pla view of the bearing hook located at the bottom of the center column.

• A bearing hook is located at the bottom of the center column. This can be used to hang additional weight (e.g., a camera bag) to increase the tripod's stability, especially in windy conditions.

Manteniment

Proper maintenance ensures the longevity and performance of your tripod:

• Neteja: Wipe down the aluminum tubes and head with a soft, dry cloth after each use. If necessary, use a slightly damp cloth with mild soap, then dry thoroughly. Avoid harsh chemicals.
• Lubricació: The hydraulic head is factory-lubricated. Do not attempt to lubricate internal components unless specifically instructed by Kodak support.
• Emmagatzematge: Store the tripod in its carry case in a cool, dry place, away from direct sunlight and extreme temperatures.
• Inspecció: Periodically check all screws, knobs, and flip locks for tightness. Ensure the anti-slip rubber bases are intact.

Resolució de problemes

Aquí teniu solucions a problemes comuns que podeu trobar:

Especificacions

Key technical specifications for the Kodak T455 Tripod with H4444 Head:

• Marca: KODAK
• Nom del model: T455 Pro
• Número de model: T455 PRO
• Material: Alumini
• Pes de l'article: 2064 grams
• Alçada màxima: 168.5 centímetres
• Alçada mínima: 62 centímetres
• Mida plegada: 61.95 cm (alt)
• Diàmetre de la cama: 34.6 mm
• Number of Leg Sections: 4
• Capacitat de pes màxim: 20 quilos
• Tipus de capçal: Video heads (H4444 Professional Hydraulic Head)
• Característiques especials: Flexible Professional Hydraulic Head, Quick Release Metal Plate, Anti-Slip Rubber Base, Flip Lock Design
• Dispositius compatibles: Càmera
• Color: Negre
• Nivell de resistència a l'aigua: No resistent a l'aigua

Informació de la garantia

The Kodak T455 Tripod with H4444 Head comes with a 6 mesos de garantia from the date of purchase. This warranty covers manufacturing defects. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

Atenció al client

For technical assistance, warranty claims, or any other inquiries regarding your Kodak T455 Tripod, please contact:

• Fabricant: Eastman Kodak Company, 343 State Street, Rochester NY 14650-0205
• Importador (Índia): BHATIA PHOTO INDUSTRIES PVT LTD, Number- 204-205, Madhuban Building 55, Opposite Sona Sweets, Nehru Place, New Delhi-110019, Delhi, India

Please have your model number (T455 PRO) and proof of purchase ready when contacting support.