Kohler 28210-NA

KOHLER 28210-NA Anthem Three-Port Digital Thermostatic Valve

Manual d'instruccions

Introducció

This manual provides essential information for the installation, operation, and maintenance of your KOHLER 28210-NA Anthem Three-Port Digital Thermostatic Valve. This valve is designed to deliver precise and consistent temperature and flow control within your showering system. Please read these instructions thoroughly before installation and use to ensure proper function and safety.

The Anthem digital thermostatic valve integrates with the Anthem digital control (sold separately) to offer a personalized showering experience with advanced digital technology.

Informació important de seguretat

  • Installation must comply with all local plumbing and building codes.
  • Always turn off the main water supply before installing or servicing the valve.
  • Assegureu-vos que totes les connexions elèctriques les faci un electricista qualificat i que compleixin les normes elèctriques locals.
  • Use only genuine KOHLER replacement parts.
  • This product is designed for use with the KOHLER Anthem digital control. Do not attempt to use it with incompatible systems.

Configuració i instal·lació

Professional installation by a licensed plumber is highly recommended for this digital thermostatic valve to ensure correct setup and optimal performance.

For detailed installation instructions, including plumbing and electrical connections, please refer to the official Installation Manual PDF provided by Kohler. A link to this document is typically found on the product's support page or included with the product packaging.

Consideracions clau per a la instal·lació:

  • Col·locació de la vàlvula: The valve should be installed in an accessible location, such as behind an access panel, for future maintenance.
  • Subministrament d'aigua: Connect hot and cold water lines to the designated inlets. Ensure proper labeling to avoid reversed connections.
  • Connexions de presa: This three-port valve supports up to three independent shower outlets. Connect each outlet to its respective fixture (e.g., showerhead, handshower, body sprays).
  • Digital Control Connection: Connect the valve to the KOHLER Anthem digital control unit using the provided data cable.
  • Font d'alimentació: The valve requires a dedicated power supply. Ensure a GFCI-protected circuit is used, as specified in the installation manual.
KOHLER 28210-NA Anthem Three-Port Digital Thermostatic Valve

Image: The KOHLER 28210-NA Anthem Three-Port Digital Thermostatic Valve. This image shows the compact design of the valve, highlighting its various connection points for water inlets and outlets, and the digital control interface port.

Per obtenir una guia completa, consulteu la Manual d'instal·lació (PDF).

Instruccions de funcionament

The KOHLER 28210-NA Anthem Three-Port Digital Thermostatic Valve operates in conjunction with the KOHLER Anthem Digital Control (sold separately). All temperature and flow adjustments are made via the digital control interface or the KOHLER Konnect app.

  1. Encès: Ensure the valve and digital control are powered on. The digital control display should illuminate.
  2. Selecting Outlets: Use the digital control to select which of the three connected shower outlets you wish to activate. Each outlet can be controlled independently.
  3. Ajust de temperatura: Adjust the desired water temperature using the controls on the Anthem digital interface. The digital thermostatic technology will maintain this temperature precisely.
  4. Ajust de cabal: Adjust the water flow rate for each active outlet as desired.
  5. Mode Eco: To conserve water, activate the optional Eco Mode. In this mode, only one outlet can be used at a time. Refer to your Anthem digital control manual for specific instructions on enabling Eco Mode.
  6. KOHLER Konnect App: For enhanced features and personalized experiences, download and connect the KOHLER Konnect app to your Anthem system. This allows for remote control, preset shower experiences, and system updates.
  7. Potència Outage Behavior: En cas d'una potènciatage, the valve will shut off for safety. It will resume normal operation once power is restored and the system is reactivated via the digital control.

For detailed operation of the digital control, please refer to the Instruccions d'ús (IFU) (PDF) for the Anthem Digital Control.

Manteniment

Regular maintenance ensures the longevity and optimal performance of your digital thermostatic valve.

  • Neteja: Clean the exterior of the valve (if accessible) with a soft, damp cloth. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or internal components.
  • Inspecció: Periodically inspect all visible connections for leaks or signs of wear. Address any issues promptly.
  • Actualitzacions de programari: If using the KOHLER Konnect app, ensure your system's software is up to date. Updates often include performance improvements and bug fixes.
  • Hivernització (si escau): If the valve is installed in an unheated area subject to freezing temperatures, follow proper winterization procedures to prevent damage. Consult a professional plumber if unsure.

For any internal maintenance or repairs, it is recommended to contact a qualified service technician or KOHLER customer support.

Resolució de problemes

ProblemaCausa possibleSolució
No water flow or inconsistent flow.
  • El subministrament d’aigua està desactivat.
  • Valve is not receiving power.
  • Digital control not communicating with valve.
  • Eco Mode is active, limiting outlets.
  • Check main water supply.
  • Verify power to the valve and digital control. Check GFCI.
  • Ensure data cable connection is secure. Restart digital control.
  • Deactivate Eco Mode if multiple outlets are desired.
Inaccurate or fluctuating water temperature.
  • Hot/cold water lines reversed during installation.
  • Insufficient hot water supply.
  • System calibration issue.
  • Consult installation manual to verify plumbing connections.
  • Check water heater settings and capacity.
  • Refer to the digital control's manual for calibration procedures or contact support.
KOHLER Konnect app not connecting or functioning.
  • Problemes de connectivitat Wi-Fi.
  • Outdated app or system firmware.
  • Module issue (as noted in reviews).
  • Ensure strong Wi-Fi signal and correct network credentials.
  • Update the KOHLER Konnect app and check for system firmware updates.
  • If issues persist, contact KOHLER customer support for potential hardware module replacement.

If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact KOHLER customer support or a qualified service professional.

Especificacions

CaracterísticaDetall
Número de model28210-NA
MarcaKohler
Nombre de Ports3
MaterialBrass (Exterior Finish: Brass)
Dimensions de l'article (L x A x A)9.06 x 9.06 x 3 polzades
Pes de l'article7.1 lliures
Tipus de connexió d'entradaNational Pipe Tapered (NPT)
Tipus de connexió de presaNPT
Mida de connexió de presa0.5 polzades
Mida del fil1/2 polzada
Tipus de vàlvulaTermostàtica
Certifications (Specification Met)ASSE 1017, NSF/ANSI 372, UL, ETL
Components inclososProduct Only (Valve)

Informació de la garantia

This KOHLER 28210-NA Anthem Three-Port Digital Thermostatic Valve is covered by the KOHLER® Garantia limitada d'un any. This warranty covers defects in material and workmanship for a period of one year from the date of purchase.

For full terms and conditions of the warranty, including limitations and how to make a claim, please refer to the warranty documentation included with your product or visit the official Kohler weblloc.

Atenció al client

If you require assistance with installation, operation, troubleshooting, or warranty claims, please contact KOHLER customer support.

KOHLER Official Weblloc: www.kohler.com

Please have your model number (28210-NA) and proof of purchase ready when contacting support.

Documents relacionats - 28210-NA

Preview Manual de servei de la vàlvula termostàtica de sis ports i la interfície digital Kohler
Aquest manual de servei proporciona una guia completa per al manteniment, la resolució de problemes i la reparació de la vàlvula termostàtica de sis ports (DTV) Kohler i la seva interfície digital. Detalla les teories de funcionament, la identificació de les peces, els procediments d'accés i els protocols de servei per als models K-682, K-683, K-685, K-684 i K-686, garantint un manteniment adequat per part de tècnics qualificats.
Preview Fitxa tècnica de la vàlvula termostàtica digital de dos ports KOHLER DTV+ K-528-K1
Fitxa detallada d'especificacions de la vàlvula termostàtica digital de dos ports KOHLER DTV+ (K-528-K1), que descriu les característiques, els requisits d'instal·lació, les especificacions tècniques i els estàndards de compliment per als sistemes de dutxa digitals.
Preview Vàlvula termostàtica de sis ports KOHLER DTV K-682-K: característiques, especificacions i guia d'instal·lació
Informació detallada sobre la vàlvula termostàtica de sis ports KOHLER DTV K-682-K, incloses les seves capacitats de mescla termostàtica digital, els requisits d'instal·lació, les especificacions tècniques i el compliment dels estàndards de la indústria.
Preview Guia d'instal·lació de la vàlvula Kohler 1413578-T2 | Instruccions oficials
Guia d'instal·lació pas a pas per a la vàlvula Kohler 1413578-T2. Inclou avisos de seguretat, instruccions de connexió i detalls d'atenció al client.
Preview Control de vàlvula termostàtica encastrada Kohler Anthem K-26346-9: full d'especificacions
Fitxa detallada d'especificacions per al control de vàlvula termostàtica mecànica encastrada de dues sortides Kohler Anthem K-26346-9, que inclou les característiques, la instal·lació, les dimensions tècniques i els acabats disponibles.
Preview Guia d'instal·lació i cura del generador de vapor Kohler
Aquesta guia proporciona instruccions completes d'instal·lació, seguretat i cura per als generadors de vapor Kohler, incloent-hi les especificacions del model i consells per a la resolució de problemes dels models K-5525-NA a K-5543-NA.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.