TC Electronic Infinite Sample Sustainer Pedal User Manual

Introducció

The TC Electronic Infinite Sample Sustainer is a versatile guitar effects pedal designed to sample and sustain your guitar signal, creating rich, ambient pads for you to play over. It features optional layering, an infinite mode for continuous morphing layers, and integrated reverb and modulation effects. The footswitch can be configured for either latching or momentary operation, providing flexible control over your sound.

Producte acabatview

Figura 1: Controls del panell frontal. Aquesta imatge mostra la imatge de dalt a baix view of the Infinite Sample Sustainer pedal, highlighting the Decay, Level, Fade In, and FX Type knobs, along with the Dry/Verb switch, Latch/Momentary switch, and the main footswitch. Input and output jacks are visible on the sides.

Figura 2: Angle View. An angled perspective of the pedal, showcasing its compact blue casing and the arrangement of its control knobs and jacks.

Figura 3: Connexions del panell posterior. This image shows the rear of the pedal, featuring the DC power input and the USB port for connectivity and firmware updates.

Figure 4: Regulatory Information. The bottom label of the pedal, displaying compliance markings, power requirements (9V === 100mA), and manufacturing details.

Configuració

Connexió d'alimentació

The Infinite Sample Sustainer pedal requires a 9V DC power supply with a center-negative polarity. Ensure the power supply provides at least 100mA. Connect the power supply to the DC input jack located on the rear of the pedal.

Connexions d'àudio

1. Connecteu la vostra guitarra o un altre instrument a IN jack on the right side of the pedal using a standard 1/4" instrument cable.
2. Connecteu el FORA presa al costat esquerre del pedal al vostre amplifier or the next pedal in your signal chain using another 1/4" instrument cable.
3. For advanced routing, utilize the ENVIAR i TORNAR jacks to integrate external effects into the pedal's internal FX loop. This allows you to apply other effects specifically to the sustained signal.

Connexió USB

The USB port on the rear of the pedal is used for connecting to a computer for firmware updates and TonePrint editing. Use a standard USB cable to connect the pedal to your computer.

Funcionament del pedal

Controls acabatsview

• Bot de decaïment: Controls how quickly the sustained sound fades out. Turn clockwise for longer sustain.
• Control de nivell: Adjusts the overall output volume of the sustained signal.
• Botó FADE IN: Determines the speed at which the sustained sound fades in after the footswitch is engaged.
• FX TYPE Knob: Selects between different effect types (L1, L2, L3, Infinite, TP1, TP2, TP3).
  • L1, L2, L3: Layering modes, allowing you to stack multiple sustained notes or chords.
  • Infinite: Creates an indefinite number of layers that gradually morph together, ideal for ambient textures.
• DRY/VERB Switch: Toggles between a dry sustained signal and a sustained signal with integrated reverb.
• LATCH/MOMEN Switch: Configures the footswitch behavior.
  • CERCA: Press once to engage sustain, press again to disengage.
  • MOMEN (Momentary): Sustain is active only while the footswitch is held down.
• Interruptor de peu: Engages and disengages the sustain effect based on the LATCH/MOMEN switch setting.

Funcionament bàsic

To activate the sustain effect, play a note or chord and then press the footswitch. The pedal will capture and sustain the sound according to your settings. Experiment with the Decay, Level, and Fade In knobs to shape the sustained sound. Utilize the FX Type knob to explore different layering and infinite sustain possibilities, or load custom TonePrints for unique effects.

Manteniment

The TC Electronic Infinite Sample Sustainer pedal is built for durability. To ensure its longevity and optimal performance:

• Keep the pedal clean by wiping it with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Protect the pedal from extreme temperatures, humidity, and direct sunlight.
• Desconnecteu l'alimentació quan no l'utilitzeu durant períodes prolongats.
• Comproveu regularment totes les connexions dels cables per assegurar-vos que estiguin ben ajustades.

Resolució de problemes

Especificacions

• Model: INFINIT SAMPLE SUSTAINER
• Dimensions (L x A x A): 4.8" x 2.91" x 1.97" (12.19 cm x 7.39 cm x 5.00 cm)
• Pes: 12 unces (340 grams)
• Requisit d'energia: 9V DC, Center-Negative, 100mA minimum
• Interfície de maquinari: USB (for TonePrint and firmware updates)
• Format del senyal: Analògic
• Color: Blau

Garantia i Suport

TC Electronic products are covered by a limited warranty. For detailed warranty information, product registration, and technical support, please visit the official TC Electronic weblloc web o poseu-vos en contacte amb el seu servei d'atenció al client. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.

For the latest information and software downloads, visit: www.tcelectronic.com