Xetron STC-1000Pro Digital Temperature Controller User Manual

1. Introducció

The Xetron STC-1000Pro is a versatile digital temperature controller designed for precise temperature management in various environments. It features dual outlets for simultaneous heating and cooling control, a wide temperature range, and user-friendly operation. This manual provides detailed instructions for setting up, operating, and maintaining your device.

Figure 1: Xetron STC-1000Pro Digital Temperature Controller. This image displays the main unit with its digital display, control buttons, power cord, temperature sensor, and the dual-outlet power strip for heating and cooling devices.

Aplicacions

The STC-1000Pro is suitable for a wide range of applications requiring accurate temperature control, including:

• Reptile enclosures and terrariums
• Home brewing and fermentation
• Incubadores
• Hivernacles
• Aquaris
• Nevera

Figure 2: Common applications for the Xetron STC-1000Pro. This image illustrates the controller's use in home brewing, incubators, aquariums, and flower cultivation, highlighting its versatility.

2. Característiques clau

• Ideal Temperature Control: Two outlets allow simultaneous or separate connection of heating and cooling equipment for automatic temperature switching. Wide control range of -40 to 230 ℉ (-40 to 110 ℃) with a temperature accuracy of ±1 ℃ / ±2 ℉.
• Disseny fàcil d'utilitzar: Simple 3-button operation and pre-wired design for plug-and-play functionality. Large display for easy real-time data reading.
• Sistema d'alarma dual: Adjustable high/low temperature alarms with audible beeps and a bell icon on the display, ensuring timely alerts even when not near the device.
• Paràmetres personalitzables: Supports settings for ℃/℉ unit switching, temperature calibration, high and low alarm values, start delay, and protection time (cooling mode only).
• Seguretat i qualitat: Constructed from V-0 flame-retardant ABS material. Features compressor delay protection and complies with CE and FCC standards for safe operation.
• Sonda impermeable IP65: The temperature probe head can be immersed in fresh water, and the main unit features an internal rubber ring to prevent water ingress.

Figure 3: Temperature control range of the Xetron STC-1000Pro. This image highlights the controller's ability to maintain temperatures within a desired range of -40 to 230 ℉ using both cooling and heating devices.

Figure 4: Large screen display of the Xetron STC-1000Pro. The image shows the display dimensions and labels for PV (Present Value), SV (Set Value), Csp (Cooling Start Point), and Hsp (Heating Start Point), indicating ℃/℉ switchability.

Figure 5: Visual and audible alert features. This image illustrates the double alarm and delay protection functionalities of the controller, enhancing safety and monitoring.

Figure 6: Safety and quality certifications. The image highlights the V-0 flame-retardant ABS material and compliance with CE, FCC, and RoHS standards, ensuring product safety.

Figure 7: IP65 waterproof features. This image demonstrates the waterproof capability of the temperature probe, which can be immersed in fresh water, and the internal rubber ring for main unit protection.

3. Instruccions de configuració

1. Desempaquetar el dispositiu: Carefully remove the Xetron STC-1000Pro controller and its components from the packaging.
2. Connecteu el sensor: Ensure the temperature sensor is fully inserted into its dedicated port on the side of the controller. A loose connection can lead to "ERR" display.
3. Col·loca el sensor: Place the temperature probe in the environment where temperature monitoring and control are required. Ensure it is not directly exposed to heating or cooling elements to get an accurate reading.
4. Connecteu els dispositius de calefacció/refrigeració:
   • Plug your heating device (e.g., heat lamp, heating mat) into the socket labeled "HEATING".
   • Plug your cooling device (e.g., fan, chiller) into the socket labeled "COOLING".

   Important: The maximum output for each socket is 10A at 240VAC. Do not connect high-power equipment exceeding these limits.

5. Encès: Plug the controller's main power cord into a standard 230V AC power outlet. The display will illuminate, showing the current temperature (PV) and other settings.

Figure 8: Plug-and-play setup of the Xetron STC-1000Pro. This image demonstrates the simplicity of connecting the controller, showing it mounted on a wall next to a terrarium, with heating/cooling devices plugged in.

4. Instruccions de funcionament

The STC-1000Pro features a simple 3-button interface: SET, Amunt (▲), i BAIX (▼).

4.1 Mostra finalview

• PV (Present Value): Mostra la temperatura mesurada actual.
• SV (Valor definit): Displays the target temperature you wish to maintain.
• Csp (Cooling Start Point): The temperature at which the cooling device will activate.
• Hsp (Heating Start Point): The temperature at which the heating device will activate.

4.2 Configuració de la temperatura objectiu (SV)

1. Premeu el botó SET button once. The SV value will flash.
2. Utilitza el Amunt (▲) or BAIX (▼) botons per ajustar la temperatura objectiu.
3. Premeu SET again to confirm and save the setting, or wait a few seconds for it to save automatically.

4.3 Configuració avançada dels paràmetres

Per accedir a la configuració avançada, manteniu premut el botó SET button for approximately 3 seconds until the display changes to show parameter codes.

Figure 9: Diagram illustrating parameter settings. This image shows the relationship between TS (Temperature Set-point), CD (Cooling Differential), HD (Heating Differential), Csp (Cooling Start Point), and Hsp (Heating Start Point).

Utilitza el Amunt (▲) or BAIX (▼) buttons to navigate through the parameters. Press SET to enter a parameter's value, then use Amunt (▲) or BAIX (▼) to adjust, and SET de nou per salvar.

After adjusting parameters, press and hold SET again for 3 seconds to exit the advanced settings menu and return to normal operation.

5. Manteniment

• Neteja: Disconnect the power before cleaning. Wipe the controller's surface with a soft, damp cloth. Do not use abrasive cleaners or immerse the main unit in water. The temperature probe can be cleaned with water.
• Emmagatzematge: Store the device in a dry environment within the temperature range of -20 ℃ to 75 ℃ (-4 ℉ to 167 ℉) to ensure the longest possible lifespan.
• Cura del sensor: Ensure the temperature sensor cable is not pinched or damaged. A damaged sensor can lead to inaccurate readings or error messages.

6. Solució De Problemes

7. Especificacions

8. Advertències i precaucions de seguretat

• Càrrega elèctrica: Do not connect equipment with a total power consumption exceeding 10A (2400W at 240V) to each outlet. Overloading can cause damage to the controller and connected devices, and poses a fire hazard.
• Voltage Compatibilitat: Ensure the controller's voltage (230V) matches your local power supply.
• Exposició a l'aigua: While the probe is waterproof, the main controller unit is not designed for immersion. Avoid exposing the main unit to direct water spray or submersion.
• Integritat del sensor: Always ensure the temperature sensor is fully and securely inserted. A short-circuited or damaged sensor will trigger a fault alarm and disable outputs for protection.
• Nens i animals de companyia: Keep the device and its cables out of reach of children and pets to prevent accidental damage or injury.
• Ventilació: Assegureu-vos que hi hagi una ventilació adequada al voltant del controlador per evitar el sobreescalfament.

9. Suport i informació de contacte

For any questions, technical assistance, or customer service inquiries regarding your Xetron STC-1000Pro Digital Temperature Controller, please contact Xetron customer support. We are committed to providing satisfactory customer service.

Please refer to the product packaging or the retailer's weblloc web per obtenir les dades de contacte més actualitzades.