1. Acabatview
This official HelloBaby replacement charger is designed to provide reliable power to your compatible HelloBaby baby monitor and camera units. It serves as an ideal accessory for replacing a lost or damaged power cord adapter, ensuring continuous monitoring of your little one.
Característiques principals:
- Àmplia compatibilitat: Specifically designed for HelloBaby baby monitors and cameras from 2022 and later versions, including HB6550, HB6550-2, HB6560, HB40, HB6339, HB6336, and HB6250.
- Especificacions de potència: Input: 100-240V, 50/60 Hz; Output: 5.0V, 1A.
- Longitud òptima: Features a 6.6ft (approximately 2 meters) cable, matching the original power cord length for flexible placement.
- Certificat de seguretat: Equipped with charging safety certification to ensure safe operation.

Figure 1: HelloBaby replacement charger with its attached warning tag. Always keep cords out of reach of children.
2. Instruccions de configuració
Follow these steps to properly set up your HelloBaby replacement charger:
- Verificar la compatibilitat: Ensure your HelloBaby monitor model is listed as compatible (e.g., HB6550, HB6560, HB50-5V, HB40, HB6339, HB6336, HB6250). If unsure, refer to your monitor's manual or contact HelloBaby support.
- Connect to Monitor/Camera: Insert the small connector end of the charger cable into the designated power port on your HelloBaby baby monitor or camera unit.
- Connecteu-vos a la presa de corrent: Plug the AC adapter end of the charger into a standard 100-240V wall outlet.
- Confirma la càrrega: The monitor or camera should indicate that it is receiving power or charging (e.g., a charging icon on the screen or an LED indicator).

Figure 2: Power adapter details, confirming 5V 1A output for safe charging.
Video 1: This video demonstrates the HelloBaby monitor's features, including its setup and use, which involves connecting the power adapter for charging and continuous operation.
3. Funcionament
Once connected, the charger will automatically begin supplying power to your HelloBaby monitor or camera. For optimal battery life, it is recommended to keep the monitor plugged in when not in active use or when the battery level is low. The charger is designed for continuous use.
4. Cura i Manteniment
To ensure the longevity and safe operation of your charger, please observe the following:
- Manejar amb cura: Avoid bending or twisting the cable excessively, especially near the connectors, to prevent internal wire damage.
- Mantenir sec: No exposeu el carregador a l'aigua ni a una humitat excessiva.
- Netegeu suaument: If cleaning is necessary, unplug the charger from the wall and wipe it with a dry, soft cloth. Do not use liquid cleaners.
- Emmagatzematge: Quan no l'utilitzeu, guardeu el carregador en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
- Advertència de seguretat: The charger cable includes a warning tag regarding strangulation hazards. Always keep the cord out of reach of children (more than 3 feet / 0.9 meters away). Do not remove this tag.
5. Solució De Problemes
If your monitor or camera is not charging, perform the following diagnostic steps:
- Comproveu la presa de corrent: Ensure the wall outlet is functional by plugging in another device.
- Inspeccionar connexions: Verify that both ends of the charger are securely plugged into the monitor/camera and the wall outlet.
- Swap Cords (if applicable): If you have two original power cords (e.g., one for the monitor, one for the camera), try swapping them between devices. If a device works with the swapped cord, then the original cord for that device may be faulty, and this replacement charger is needed.
- Contacte amb l'assistència: If the issue persists after these steps, contact HelloBaby customer support for further assistance or warranty claims.
6. Especificacions del producte
| Característica | Detall |
|---|---|
| Marca | Hola bebé |
| Número de model | AC |
| Tipus de connector | AC |
| Dispositius compatibles | HelloBaby Baby Monitors (HB6550, HB6550-2, HB6560, HB50, HB6339, HB6250, HB40, HB6336) |
| Entrada Voltage | 100-240 V (CA) |
| Vol. De sortidatage | 5.0 V |
| Ampedat | 1 Amps |
| Wattage | 5 watts |
| Longitud del cable | 6.6 peus (aprox. 2 metres) |
| Característica especial | Protecció contra curtcircuits |
| Color | Blanc |
| Pes de l'article | 0.317 unces |
7. Informació de la garantia
This HelloBaby replacement charger comes with a one-year warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product functions as intended under normal use. Please retain your proof of purchase for any warranty claims.
8. Atenció al client
For any questions, concerns, or technical assistance regarding your HelloBaby baby monitor charger, please contact HelloBaby customer support. You can typically find contact information on the HelloBaby official weblloc web o a través del venedor on vau comprar el producte.