addlon A09JW04114

addlon LED Replacement Bulbs 1W T13

Model: A09JW04114

Introducció

Thank you for choosing addlon LED Replacement Bulbs. These 1W T13 LED bulbs are designed for both indoor and outdoor use, featuring an E12 screw base, shatterproof plastic construction, and waterproof capabilities. They are an energy-efficient and durable lighting solution for various applications, including string lights, chandeliers, and wall lamps. This manual provides essential information for the proper installation, operation, and maintenance of your new LED bulbs.

Four addlon 1W T13 LED replacement bulbs with E12 screw bases, shown scattered against a white background.

Image: A set of four addlon 1W T13 LED replacement bulbs, highlighting their clear plastic design and E12 screw base.

Configuració i instal·lació

Follow these steps for safe and proper installation of your addlon LED bulbs:

  1. Apagar: Before installing or replacing any bulb, ensure the power to the light fixture is turned off at the main switch or circuit breaker to prevent electrical shock.
  2. Verify Base Type: Confirm that your light fixture uses an E12 candelabra screw base. These bulbs are specifically designed for E12 sockets.
  3. Bombeta de cargol: Gently screw the LED bulb clockwise into the E12 socket until it is snug. Do not overtighten.
  4. Encès: Resta l'alimentació de la llum.

These bulbs are suitable for both indoor and outdoor applications, including string lights, chandeliers, and wall lamps. Their waterproof and shatter-resistant design makes them ideal for various environments.

Diagram showing the dimensions of an addlon 1W T13 LED bulb: 0.5 inches in diameter and 2.6 inches in length, with an E12 base indicated.

Image: A detailed diagram illustrating the dimensions of the T13 LED bulb (0.5 inches diameter, 2.6 inches length) and its E12 screw base.

Instruccions de funcionament

Your addlon LED bulbs are designed for simple operation and energy efficiency.

  • Funcionament estàndard: Once installed and power is supplied, the bulbs will illuminate.
  • Funcionalitat d'atenuació: These bulbs are compatible with most dimmers (approximately 95% of dimmers on the market). To adjust brightness, use a compatible dimmer switch connected to your light fixture.
  • Sortida de llum: Each 1W LED bulb provides a warm white light (2700K) with a brightness of 100 lumens, equivalent to a 6W incandescent bulb.
Three images showing an addlon LED bulb dimmed to 5%, 50%, and 100% brightness, demonstrating dimmer compatibility.

Image: Visual representation of the bulb's dimming capability at 5%, 50%, and 100% brightness levels.

An addlon LED bulb emitting 2700K warm white light, creating a cozy ambiance in a room.

Image: The addlon LED bulb illuminated, showcasing its 2700K warm white light output.

Manteniment

The addlon LED Replacement Bulbs require minimal maintenance due to their durable design.

  • Neteja: To clean the bulbs, ensure the power is off and the bulbs are cool. Wipe gently with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • Durabilitat: These bulbs are constructed from shatter-resistant plastic and are waterproof, designed to withstand outdoor conditions such as hot weather, wind, blizzards, or heavy rain.
  • Longevitat: With an estimated life of 13.7 years (based on 3 hours of use per day), frequent replacement is not typically required.

Resolució de problemes

If you encounter issues with your addlon LED bulbs, refer to the following common solutions:

  • Bombeta que no il·lumina:
    • Assegureu-vos que l'aparell estigui connectat.
    • Check that the bulb is securely screwed into the E12 socket.
    • Test the bulb in a different, known-working E12 fixture.
  • Problemes d'atenuació:
    • Verify that your dimmer switch is compatible with LED bulbs. While these bulbs are widely compatible, some older or non-LED specific dimmers may cause flickering or improper dimming.
    • Ensure the dimmer is correctly installed and functioning.
  • Parpelleig:
    • Flickering can sometimes be caused by an incompatible dimmer or an unstable power supply. Try the bulb in a non-dimmed fixture or with a different dimmer.

Si els problemes persisteixen després de seguir aquests passos, poseu-vos en contacte amb l'atenció al client.

Especificacions

CaracterísticaDetall
Marcaaddlon
Nom del modelA09JW04114
Tipus de llumLED
Base del bulbE12
Wattage1 watts
Equivalent incandescent6 watts
Brillantor100 lúmens
Color clarBlanc càlid (2700K)
Característiques especialsShatter Resistant, Waterproof
MaterialPlàstic
Ús interior/exterior
Voltage / Freqüència100-120 volts, 60 hertz
Índex de reproducció del color (CRI)80+
Cost energètic anual estimat$0.12 (based on 3 hrs/day, 11¢/kWh)
Vida estimada13.7 anys (basat en 3 hores/dia)
Dimensions (Diàmetre x Longitud)0.5 polzades x 2.6 polzades
An addlon LED bulb with a graphic indicating 'Lower Energy Cost' and 'Estimated cost $0.12 per year', comparing 1W LED to 6W incandescent.

Image: Illustration demonstrating the energy efficiency of the 1W LED bulb compared to a 6W incandescent bulb, with an estimated annual cost of $0.12.

An addlon LED bulb next to three images of fruit, showing how CRI 80+ accurately displays colors compared to lower CRI values.

Image: A visual comparison demonstrating the superior color rendering (CRI 80+) of the addlon LED bulb, showing how it accurately displays colors.

Garantia i Suport

addlon provides a Promesa d'1 any for these LED Replacement Bulbs, ensuring quality and customer satisfaction.

If you have any questions, concerns, or require assistance with your addlon LED bulbs, please do not hesitate to contact our customer support team. For the most up-to-date contact information, please refer to the addlon official weblloc web o la documentació de la compra.

We are committed to providing you with reliable products and excellent service.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.