TOPENS CK1100 Automatic Sliding Gate Opener Instruction Manual

1. Introducció

The TOPENS CK1100 Automatic Sliding Gate Opener is designed for heavy-duty sliding gates, supporting up to 2800 pounds in weight and 40 feet in length. This AC-powered gate opener provides reliable and secure operation for various gate types, including steel, wood, vinyl, panel, and chain-link gates. It features advanced safety mechanisms and intelligent design for ease of use and installation.

Please read this instruction manual carefully before installation and operation to ensure safe and proper use of the product. Keep this manual for future reference.

Imatge 1: acabatview of the TOPENS CK1100 Sliding Gate Opener and its key features.

2. Producte acabatview

2.1 Característiques clau

• Motor potent: Equipped with a 3/5 HP 450W AC motor, capable of driving gates up to 2800 lbs and 40 ft.
• Aplicació àmplia: Suitable for all types of sliding gates in residential, commercial, courtyard, farm, and ranch settings.
• Protecció múltiple: Advanced code technology for remote access, midway mode for partial opening, safety stop-and-reverse, auto-close function, and manual release key.
• Disseny intel·ligent: Built-in smart chip for easy open/close direction switching (left or right), reliable electromagnetism limit switch.

2.2 Components inclosos

The TOPENS CK1100 package includes the main gate opener unit, a base plate, two M12 remote controls, a 20ft roller chain, magnet assemblies, and various mounting hardware. A power supply cord is required but not included.

Imatge 2: Detallada view of the TOPENS CK1100 motor and internal components.

3. Configuració i instal·lació

The installation process may vary depending on your gate and ground conditions. The following steps provide a general reference. Ensure your gate can open and close smoothly by hand without the gate opener before starting installation.

3.1 Instal·lació mecànica

1. Assemble the Base Plate: Connect the base plate components using the provided bolts and nuts. Ensure all connections are secure.


Image 3: Assembling the base plate for the gate opener.

2. Install Idler Wheels: Attach the idler wheels to the base plate using the provided bolts, washers, and nuts.

Image 4: Attaching the idler wheels to the base plate.
3. Install the Motor on the Base Plate: Remove the cover of the motor unit. Place the motor onto the assembled base plate. Adjust the motor position to align the drive sprocket and the two idler wheels vertically. Reinforce all bolts.


Image 5: Mounting the motor unit onto the base plate.

4. Determine the Position of Gate Opener: Ensure the teeth of the chain wheels are within the range of the hole in the 'L' bracket when viewed vertically. Mark the bolt-hole points.


Image 6: Diagram for determining the correct gate opener position relative to the gate and 'L' bracket.

5. Perforar forats i fixar: Drill holes at the marked points. Select appropriate bolts (expansion bolts included, hex bolts not included) based on your ground surface. Secure the base plate to the ground.

Image 7: Drilling holes for securing the base plate to the ground.
6. Install 'L' Brackets: Install the 'L' brackets on both sides of the gate. Ensure the bottom of the idler wheel is at the same height as the hole of the 'L' bracket.


Image 8: Attaching the 'L' bracket to the gate frame.

7. Fit the Chain: Disengage the clutch on the motor. Install the chain bolts on the 'L' brackets. Use the master link to connect the chain with the chain bolt. Ensure the chain fully engages the drive sprocket and the two idler wheels. Cut the chain to the appropriate length.


Image 9: Installing the chain bolt and connecting the chain.

8. Install the Magnets: Install the magnets on the brackets. The S magnet bracket should be installed on the left side (from inside the property view), and the N magnet bracket on the right side. Ensure the magnet center aligns with the marked line on the limit switch, and the magnet is 25-30 mm (1-1.2 inches) away from the limit switch. Reinforce with self-tapping screws.

Image 10: Attaching the magnets to their respective brackets.


Image 11: Measuring and adjusting the distance of the magnet from the limit switch.

9. Engage the Clutch: Once all mechanical components are installed, engage the clutch on the motor.


Image 12: Engaging the motor clutch after mechanical installation.

3.2 Connexió elèctrica

The CK1100 gate opener is powered by 110-120VAC electricity ONLY. The power supply cord should be at least 3 x 0.75mm² (3C x 18AWG). Connect the power supply wires to the control board as indicated in the manual.



Image 13: Connecting the power supply wires to the control board.

4. Instruccions de funcionament

4.1 Program the Remote Control

To program the remote control, press the learn button (LNSW button) on the control board. The LEARN LED will light up. Then, press the desired button on your remote control twice within 2 seconds. The LEARN LED will flash, indicating successful programming.

Image 14: Programming the remote control with the gate opener.

4.2 Setting Left / Right Open

The gate opener supports both left and right opening directions. Adjust DIP Switch #4 on the control board according to your actual opening direction. OFF for Right open, ON for Left open (factory default setting).

Image 15: Diagram showing DIP Switch #4 settings for left/right gate opening.

4.3 Adjust Open / Close Limit Position

If the gate does not stop at the desired position, re-adjust the open/close limit position by moving the magnets. Use the remote control to test the new limit positions.

Image 16: Adjusting the magnet position to set the gate's open/close limits.

4.4 Setting of the Control Board

Adjust the DIP switches and potentiometers on the control board according to the detailed instructions in the user manual for specific functions like auto-close time, soft start/stop, and force adjustment.

Image 17: Adjusting DIP switches and potentiometers on the control board.

5. Accessories Connection

The TOPENS CK1100 supports various accessories to enhance functionality and security. Ensure power is OFF before connecting any accessories.

5.1 TC147 Wall Push Button

Connect the TC147 Wall Push Button to the control board as per the wiring diagram in the full manual. The cable is not included.

Image 18: Wiring the TC147 Wall Push Button to the control board.

5.2 TC148 Waterproof Wall Push Button

Similar to TC147, connect the TC148 Waterproof Wall Push Button to the control board. The cable is not included.

5.3 JD110VY / JD230VY AC Warning Light

Connect the warning light to the control board. Ensure power is OFF before connecting and ON after connection is complete.

Image 19: Wiring the AC Warning Light to the control board.

5.4 ERM12 External Receiver

Connect the ERM12 External Receiver to the control board. Note that the remote control cannot be programmed to both the control board and external receiver simultaneously.

Image 20: Connecting the ERM12 External Receiver to the control board.

5.5 TC188 Universal Keypad (Wireless & Wired Mode)

The TC188 Universal Keypad supports both wireless and wired modes. Refer to the full manual for detailed wiring diagrams and programming steps for each mode. Ensure a new permanent entry code is added before programming.

Image 21: Programming a new permanent entry code on the TC188 Keypad.

5.6 TKP3 Wireless Keypad

To program the TKP3 Wireless Keypad, press the learn button on the control board, then press the OK button on the keypad. The LEARN LED will flash, indicating successful programming. You can use the default password (888888) or change it as instructed in the manual.

Image 22: Programming the TKP3 Wireless Keypad with the gate opener.

5.7 TC102 Photo Eye Beam Sensor & TRF3 Reflection Photocell Sensor

To enable the photocell function, disconnect the wire jumper on the control board. Connect the photo eye beam sensor or reflection photocell sensor according to the wiring diagrams provided in the full manual. These sensors enhance safety by detecting obstructions.

Image 23: Connecting the Photo Eye Beam Sensor to the control board.

5.8 TC186-R WiFi Smartphone Remote Control with Camera

Install the antenna vertically on the TC186-R unit. Connect the unit to power. Ensure your smartphone is connected to your home's 2.4GHz WiFi (5GHz is not supported) and mobile data is active. Register an account on the Linkcraft APP. Follow the in-app instructions to bind the device by selecting its WiFi signal and entering your home WiFi password. Once connected, you can control the gate via the app.

Image 24: Installing the antenna for the TC186-R WiFi Smartphone Remote Control.

6. Manteniment

Regular maintenance ensures optimal performance and longevity of your gate opener. Perform the following checks periodically:

• Inspeccioneu la cadena per assegurar-vos que estigui tensada i lubricada correctament.
• Comproveu tot el maquinari de muntatge per a l'estanquitat.
• Assegureu-vos que la porta es mogui lliurement i suaument sense obstacles.
• Clean the photocell sensors (if installed) to prevent false detections.
• Test the safety stop-and-reverse function regularly.

7. Solució De Problemes

If you encounter issues with your TOPENS CK1100 gate opener, refer to the following common problems and solutions:

For more detailed troubleshooting, please refer to the comprehensive troubleshooting guide in the full user manual or contact customer support.

8. Especificacions

9. Garantia i assistència

TOPENS provides a 12-month warranty for this product. We also offer 30-day exchange & return options and excellent technical support. For further assistance, visit the TOPENS website to download the user manual, watch installation videos, or contact our specialists for professional and timely solutions.