EDGE EDBX1800.1D-E0 DBX Series Monoblock AmpManual d'usuari més viu

1. Introducció

Gràcies per la compraasing the EDGE EDBX1800.1D-E0 DBX Series Monoblock Amplificador. Això amplifier is designed to deliver powerful and clear audio performance for your vehicle's sound system. This manual provides essential information for proper installation, operation, and maintenance to ensure optimal performance and longevity of your amplifier. Please read this manual thoroughly before attempting installation or operation.

2. Informació de seguretat

Observeu sempre les següents precaucions de seguretat durant la instal·lació i el funcionament:

• Desconnecteu el terminal negatiu de la bateria del vehicle abans de començar qualsevol treball elèctric.
• Ensure all wiring is correctly routed and secured to prevent damage or short circuits.
• Feu servir un cablejat de calibre adequat per a les connexions d'alimentació i de terra, tal com s'especifica en aquest manual.
• Instal·leu el amplifier in a well-ventilated area, away from direct sunlight, heat sources, and moisture.
• No opereu el ampel salvador si està malmès o funciona malament. Demaneu assistència professional.
• Eviteu escoltar àudio a volums excessivament alts durant períodes prolongats, ja que això pot causar danys auditius.

3. Producte acabatview

3.1 Característiques clau

• Configuration: Monoblock
• Topology: Class D
• RMS @ 4 Ohms Mono: 1 x 650 W
• RMS @ 2 Ohms Mono: 1 x 1200 W
• RMS @ 1 Ohms Mono: 1 x 1800 W
• Potència màxima: 3600 W
• Resposta de freqüència: 10 Hz - 180 Hz
• Crossover Type: LP / Subsonic
• Crossover Range: 0 Hz - 180 Hz
• Recommended Fuse: 180 A (external fuse)

3.2 Components inclosos

• Ampmés viu
• Cable
• Comandament a distància
• Manual

3.3 AmpDisseny de lificador

The following images illustrate the various parts and connections of the EDBX1800.1D-E0 ampmés viu.

Figura 1: De dalt a baix view of the EDGE EDBX1800.1D-E0 amplifier. This image displays the overall design of the amplifier, featuring a black extruded aluminum chassis with heat dissipation fins along the sides and a stylized 'E' logo on the top surface.

Figure 2: Input and Control Panel. This view highlights the amplifier's input section, including RCA input jacks (L/R), a remote bass control port, and adjustment knobs for Gain, LPF (Low Pass Filter), Subsonic filter, and Bass Boost. Status indicator LEDs for Protect and Power are also visible.

Figure 3: Power and Speaker Output Terminals. This image shows the robust screw terminals for power input (+12V, REM, GND) and dual speaker outputs. These terminals are designed to accommodate heavy gauge wiring for efficient power transfer.

4. Configuració i instal·lació

4.1 Ubicació de muntatge

Trieu una ubicació de muntatge que sigui:

• Secure and dry, away from moisture.
• Well-ventilated to allow for proper heat dissipation.
• Protected from direct sunlight and extreme temperatures.
• Accessible per cablejat i ajustos.

Common locations include under a seat, in the trunk, or mounted to a custom ampbastidor lifier.

4.2 Connexions de cablejat

Before making any connections, ensure the vehicle's battery negative terminal is disconnected.

1. Connexió d'alimentació (+12 V): Connect a heavy gauge power cable (e.g., 4 AWG) from the vehicle's positive battery terminal to the +12V terminal on the amplifier. Install an appropriate fuse (180A recommended, external) within 18 inches (45 cm) of the battery.
2. Connexió a terra (GND): Connect a heavy gauge ground cable (e.g., 4 AWG) from the GND terminal on the amplifier to a clean, unpainted metal surface on the vehicle chassis. The ground point should be as short as possible, ideally less than 3 feet (1 meter).
3. Remote Turn-On Connection (REM): Connecteu un cable de calibre més petit (per exemple, 18 AWG) des del terminal REM del amplifier to the remote turn-on output of your head unit. This wire signals the amplificador per encendre i apagar amb la unitat principal.
4. Connexió d'entrada RCA: Connect RCA cables from the pre-out (subwoofer output) of your head unit to the INPUT RCA jacks on the ampmés viu.
5. Connexió de sortida de l'altaveu: Connect your subwoofer(s) to the SPEAKER OUTPUT terminals. Ensure correct polarity (+ to + and - to -). Refer to your subwoofer's specifications for impedance matching. This amplifier is stable down to 1 Ohm.
6. Control remot dels baixos: Connect the included remote bass control to the 'REMOTE' port on the amplifier using the provided cable.

Figura 4: Detallada view of the input and control panel. This image provides a closer look at the RCA input connections, the remote bass control port, and the various rotary controls for fine-tuning the amplifier's audio output.

Figura 5: Detallada view of the power and speaker output terminals. This image clearly shows the screw-type terminals for the +12V, REM (remote), and GND (ground) power connections, as well as the dual speaker output terminals, emphasizing their robust design for secure wiring.

5. Funcionament i ajustos

After all connections are made and verified, reconnect the vehicle's battery negative terminal. Turn on your head unit. The 'POWER' LED on the amplifier should illuminate.

5.1 Ajustaments del tauler de control

• GUANY: Aquest control coincideix amb el amplifier's input sensitivity to the output level of your head unit. Start with the gain at minimum. Play a familiar track at about 75% of your head unit's maximum volume. Slowly increase the amplifier's gain until you hear distortion, then back it off slightly.
• LPF (filtre de pas baix): This filter allows only frequencies below the set point to pass through to the subwoofer. Adjust this to blend the subwoofer's output with your main speakers. A common starting point is 80-100 Hz.
• SUBSÒNIC: This filter removes extremely low frequencies that are below the audible range and can cause damage to your subwoofer or waste amplifier power. Set this typically 5-10 Hz below your LPF setting or subwoofer's resonant frequency.
• BOOST (Bass Boost): This control provides an increase in output at a specific frequency (usually around 45 Hz). Use sparingly to avoid distortion and potential speaker damage.
• FREQ (Freqüència d'augment de greus): Adjusts the center frequency for the bass boost.

Control remot de greus 5.2

The included remote bass control allows you to adjust the subwoofer output level from the driver's seat, providing convenient on-the-fly adjustments without needing to access the amplificador directament.

6. Manteniment

The EDGE EDBX1800.1D-E0 amplifier requires minimal maintenance. To ensure optimal performance and longevity:

• Mantenir el ampMantingueu el llifador net i sense pols. Feu servir un drap suau i sec per netejar-lo.
• Assegureu-vos una ventilació adequada al voltant amplifier. Do not block cooling fins.
• Comproveu periòdicament totes les connexions del cablejat per verificar si estan ben ajustades i si hi ha corrosió.
• Eviteu exposar el ampLifer a temperatures o humitat extremes.

7. Solució De Problemes

Si teniu problemes amb el vostre amplifier, consulteu els següents problemes i solucions habituals:

8. Especificacions

9. Garantia i Suport

For warranty information and technical support, please refer to the documentation provided with your purchase or contact your authorized EDGE dealer. Keep your proof of purchase for warranty claims.