Dragonhawk X4 Wireless Tattoo Pen Machine User Manual

1. Introducció

Thank you for choosing the Dragonhawk X4 Wireless Tattoo Pen Machine. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your device. The Dragonhawk X4 series is designed for professional tattoo artists, featuring a coreless motor and a customized battery to ensure safety and durability during the tattooing process.

Please read this manual thoroughly before using the machine to ensure proper handling and to maximize its performance and lifespan.

2. Informació de seguretat

WARNING: This device is intended for professional use only. Proper training, sterilization techniques, and adherence to local health and safety regulations are paramount. Improper use can lead to injury, infection, or damage to the device.

• Always ensure the machine and all accessories are properly sterilized before each use.
• Use only compatible and sterile needle cartridges.
• No submergiu la màquina en líquids.
• Mantingueu la màquina lluny dels nens i del personal no autoritzat.
• Desconnecteu l'alimentació abans de netejar o realitzar qualsevol manteniment.
• If the machine shows signs of damage or malfunction, discontinue use immediately and contact support.

3. Contingut del paquet

Upon opening your Dragonhawk X4 package, please verify that all the following items are included:

• Dragonhawk X4 Wireless Tattoo Pen Machine
• Two (2) Replacement AAA Batteries (pre-installed or separate)
• Base de càrrega
• Adaptador de corrent alterna
• Manual d'instruccions (aquest document)

4. Producte acabatview i Característiques

The Dragonhawk X4 is a lightweight and powerful wireless tattoo pen machine designed for precision and comfort.

Image: The Dragonhawk X4 Wireless Tattoo Pen Machine, highlighting its powerful coreless motor and key specifications like 3.5mm stroke length and 4-12V working voltage.

Característiques principals:

• Motor sense nucli: Equipped with a high-performance Mcore motor for consistent power and reliability.
• Longitud del traç: Fixed 3.5mm stroke length, suitable for various tattooing styles.
• Disseny compacte: Machine body diameter of only 22mm and a length of 134mm, weighing approximately 120 grams (including battery).
• Funcionament sense fil: Integrated battery provides up to three hours of operation on a one-hour full charge.
• Ergonomic & Low Vibration: Designed for comfort with an anti-roll feature, minimal noise, and low vibration.
• Pantalla integrada: LCD screen shows operating voltage and remaining battery power.
• Ajustable Voltage: Voltage can be adjusted from 4.5V to 12V in 0.5V increments.
• Càrrega USB-C: Convenient charging via USB-C port, supporting pass-through operation (charging while tattooing).
• Upgraded Eccentric Wheel: Features a larger eccentric wheel for enhanced stability, reduced noise, and less wear.

5. Configuració

5.1 Càrrega de la bateria

1. Insert the provided AAA batteries into the charging base.
2. Connect the AC power adapter to the charging base and plug it into a power outlet.
3. The battery indicator on the machine or charging base will show charging status. A full charge typically takes one hour.

Image: The Dragonhawk X4 machine alongside its charging base, demonstrating how to insert and charge the replaceable battery.

5.2 Instal·lació de la bateria

1. Unscrew the bottom part of the tattoo pen machine to access the battery compartment.
2. Insert a charged AAA battery into the compartment, ensuring correct polarity.
3. Screw the bottom part back onto the machine securely.

5.3 Attaching a Needle Cartridge

1. Assegureu-vos que la màquina estigui apagada.
2. Carefully insert a sterile needle cartridge into the front end of the machine, twisting gently until it locks into place.
3. Adjust the needle depth by rotating the grip section of the machine. Note that the position of the needle will not change when adjusting length.

6. Instruccions de funcionament

6.1 Encès/Apagat

1. To power on the machine, press and hold the power button (usually located near the display) for a few seconds until the LCD screen illuminates.
2. Per apagar l'aparell, premeu i manteniu premut el botó d'engegada de nou fins que la pantalla s'apagui.

Imatge: Un primer pla view of the Dragonhawk X4's control panel, showing the power button and digital display for voltage i nivell de bateria.

6.2 Ajust del volumtage

The Dragonhawk X4 features a gravity-induced voltage regulator for easy adjustment:

1. Ensure the machine is powered on and running.
2. Manteniu premut el botó d'encesa.
3. Gently tilt the machine body to increase or decrease the voltage. Tilting one way will increase voltage, and tilting the other way will decrease it.
4. La pantalla LCD mostrarà el volum actualtage, which can be adjusted between 4.5V and 12V in 0.5V increments.

Image: Multiple Dragonhawk X4 machines demonstrating the voltage adjustment feature by tilting the pen while holding the button.

6.3 Durant el funcionament

Image: A gloved hand holding the Dragonhawk X4 machine, dipping a needle cartridge into an ink cap, illustrating typical use.

• Always monitor the LCD screen for current voltage i la durada restant de la bateria.
• If the battery runs low during a session, you can utilize the pass-through charging feature by connecting the USB-C cable.
• The machine is designed for minimal noise and vibration, enhancing comfort during long sessions.

7. Manteniment

7.1 Neteja

• After each use, disconnect the power and remove the needle cartridge.
• Wipe down the exterior of the machine with a sterile wipe or a cloth dampnetejat amb una solució desinfectant aprovada.
• Do not allow liquids to enter the motor housing or electronic components.
• Ensure the machine is completely dry before storage or next use.

7.2 Emmagatzematge

• Store the machine in a clean, dry, and cool environment.
• Keep batteries charged to prolong their lifespan, but avoid overcharging for extended periods.
• Protect the machine from physical impact and extreme temperatures.

8. Solució De Problemes

If you encounter issues with your Dragonhawk X4, please refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact Dragonhawk customer support.

9. Especificacions

Detailed technical specifications for the Dragonhawk X4 Wireless Tattoo Pen Machine:

Image: A table displaying the key parameters of the Dragonhawk X4, including weight, stroke, motor type, working voltage, speed, diameter, and length.

10. Garantia i Suport

10.1 Informació de la garantia

The Dragonhawk X4 Wireless Tattoo Pen Machine comes with a worry-free 12-month warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper maintenance.

10.2 Atenció al client

For warranty claims, technical assistance, or any questions regarding your Dragonhawk X4 machine, please contact Dragonhawk customer support through the retailer where you purchased the product or visit the official Dragonhawk weblloc per obtenir informació de contacte.