FLEXISPOT Gas Spring Monitor Arm F8L User Manual

1. Introducció

Thank you for choosing the FLEXISPOT F8L Gas Spring Monitor Arm. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your new monitor arm. Please read this manual thoroughly before use and keep it for future reference.

Característiques principals:

• Detachable VESA plate for easy monitor attachment.
• Adjustable height for ergonomic viewing, reducing neck, eye, and back strain.
• Wide range of motion for tilt, swivel, and rotation, allowing optimal viewangles d'ajust.
• Compact design suitable for narrow desks, enabling side-by-side monitor placement at a distance.
• Supports VESA standards: 75x75mm and 100x100mm.
• Compatible with monitors from 17" to 36" and weighing between 2-9kg.

This image shows the FLEXISPOT F8L Gas Spring Monitor Arm in white, supporting a monitor. The arm is extended, demonstrating its adjustable nature and sleek design.

2. Instruccions de seguretat

• Assegureu-vos que totes les peces estiguin presents i no estiguin danyades abans del muntatge. No utilitzeu el producte si hi falta alguna peça o si és defectuosa.
• Do not exceed the maximum weight capacity of 9kg (19.8 lbs) or the maximum screen size of 36 inches. Overloading can cause instability and potential injury.
• Install the monitor arm on a stable and sturdy desk surface that can support the combined weight of the arm and your monitor.
• Perform all adjustments slowly and carefully. Avoid sudden movements that could cause the monitor to swing or fall.
• Mantingueu els nens i les mascotes allunyats de la zona d'instal·lació.
• If you encounter any difficulties during installation or operation, refer to the troubleshooting section or contact customer support.

3. Contingut del paquet

Please verify that all components are included in your package:

• Conjunt del braç del monitor
• Escriptori Clamp Base
• Base de muntatge amb ulleres
• Placa VESA
• Kit de ferramenta (cargols, volanderes, claus Allen)
• Clips de gestió de cables
• Manual d'instruccions

4. Configuració i instal·lació

The FLEXISPOT F8L monitor arm supports two installation methods: C-clamp and Grommet mount. Choose the method suitable for your desk.

4.1 Triar el mètode de muntatge

This diagram illustrates the two primary ways to attach the monitor arm to your desk: the C-clamp method (bottom right) for desk edges and the grommet mount method (top right) for desks with existing cable holes. The grommet mount requires a hole size of 8.5-70mm, and both methods support a desk thickness of 20-100mm.

• C-Clamp Muntatge: Ideal for desks with edges. Supports desk thickness from 20mm to 100mm.
• Muntatge de grommet: Requires an existing hole in your desk (diameter 8.5mm to 70mm). Supports desk thickness from 20mm to 100mm.

4.2 Attaching the Monitor Arm to Your Desk

1. Per C-Clamp Muntatge:
   • Enganxeu el C-clamp base to the main pole of the monitor arm.
   • Col·loca el clamp on the edge of your desk and tighten the knob until it is securely fastened.
2. Per a muntatge amb ullera:
   • Assemble the grommet mount base and insert it through the hole in your desk.
   • Secure it from underneath the desk using the provided plate and nut.

4.3 Attaching the Monitor to the Arm

This image demonstrates the detachable VESA plate feature. The VESA plate can be easily removed from the monitor arm, allowing you to attach it to the back of your monitor first, and then slide the monitor with the plate onto the arm for a simpler installation process.

1. Col·loqueu la placa VESA al monitor:
   • Remove the VESA plate from the monitor arm by lifting it upwards.
   • Alineeu la placa VESA amb els forats de muntatge de la part posterior del monitor (75 x 75 mm o 100 x 100 mm).
   • Secure the plate to the monitor using the appropriate screws from the hardware kit. Do not overtighten.
2. Muntar el monitor al braç:
   • Carefully slide the monitor (with the attached VESA plate) onto the arm's mounting head until it clicks into place.
   • Ensure the monitor is securely seated before releasing això.

5. Funcionament i ajustos

The FLEXISPOT F8L monitor arm offers a wide range of adjustments to achieve your optimal viewexperiència.

5.1 Ajust de la tensió de la molla de gas

The gas spring tension needs to be adjusted according to your monitor's weight to ensure smooth and stable movement. If the monitor sags or springs up too easily, adjust the tension screw located on the arm joint (often covered by a plastic cap).

• Use the provided Allen wrench to turn the screw.
• Gira en sentit horari to increase tension (for heavier monitors).
• Gira en sentit antihorari per disminuir la tensió (per a monitors més lleugers).
• Adjust gradually until the monitor stays in position when released.

5.2 Monitor Position Adjustments

This diagram illustrates the extensive range of motion for the monitor arm, including 360° rotation, 180° horizontal swivel, and tilt adjustment from -90° to 15°. These features allow for precise positioning of your monitor.

• Ajust d'alçada: Gently push or pull the monitor up or down to adjust its vertical position. The gas spring will hold it in place.
• Ajust d'inclinació: Tilt the monitor screen up or down from -90° to 15° to reduce glare and optimize viewangle de ing.
• Ajust de gir: Swivel the monitor arm horizontally up to 180° to share your screen or change viewdirecció.
• Ajust de rotació: Rotate the monitor 360° between landscape and portrait orientations.

This illustration compares typical poor posture when using a fixed monitor stand (left) versus the improved ergonomic posture achievable with a monitor arm (right). By allowing flexible height and angle adjustments, the monitor arm helps reduce strain on the neck, eyes, and back.

6. Manteniment

• Regularly check all screws and connections to ensure they are tight and secure. Retighten if necessary.
• Netegeu el braç del monitor amb un drap suau iamp drap. Eviteu productes de neteja abrasius o dissolvents que puguin danyar l'acabat.
• No lubriqueu el mecanisme de la molla de gas. Està dissenyat per no necessitar manteniment.

7. Solució De Problemes

8. Especificacions

This diagram provides key dimensions of the monitor arm, including a maximum height of approximately 51cm and a maximum horizontal extension of approximately 62cm, illustrating its reach and adjustability.

9. Garantia i atenció al client

FLEXISPOT provides a 1 any de garantia from the date of purchase for this product. This warranty covers manufacturing defects and material flaws under normal use.

For any questions, concerns, or issues regarding your FLEXISPOT F8L Gas Spring Monitor Arm, please contact our customer support team:

• Correu electrònic: contact@flexispot.jp
• Please provide your purchase details and a description of the issue for faster assistance.