ECOXGEAR ES08
Manual d'usuari del subwoofer ECOXGEAR SoundExtreme ES08
Model: ES08 | Marca: ECOXGEAR
Introducció
This user manual provides comprehensive instructions for the installation, operation, and maintenance of your ECOXGEAR SoundExtreme ES08 Waterproof Bluetooth LED Backlit 8-inch Loaded Subwoofer Enclosure. Please read this manual thoroughly before using the product to ensure proper function and longevity.
The ECOXGEAR SoundExtreme ES08 Subwoofer, showcasing its robust design and illuminated speaker.
Què hi ha a la caixa
Verifiqueu que tots els components siguin presents abans de continuar amb la instal·lació:
- 1x SoundExtreme Subwoofer
- 1x 6.6-FT 12V DC Power Cable
- 1x 6.6-FT Remote Turn-on Cable
- 1x 6.6-FT 3.5mm Audio Cable
- 1x Wired Remote Gain Controller
- Vertical and Horizontal Mounting Brackets and Related Hardware
- Manual d'usuari (aquest document)
All components included with the SoundExtreme ES08 Subwoofer.
Configuració i instal·lació
Opcions de muntatge
The ES08 Subwoofer can be mounted either vertically or horizontally using the provided brackets. Choose the orientation that best suits your vehicle and space requirements.
Muntatge vertical
Vertical mounting template with dimensions.
Muntatge horitzontal
Horizontal mounting template with dimensions.
Ensure the mounting surface is stable and secure. Use the provided hardware for installation. For detailed steps, refer to the included user guide's mounting section.
Connexions d'alimentació i àudio
Connect the 12V DC Power Cable to your vehicle's power source. The ES08 features auto-on power modes, activating when audio, 12V DC power, or ignition switch is detected. Use the 3.5mm Audio Cable to connect the subwoofer's SUB-IN jack to any soundbar, amplifier, or stereo's wired LINE-OUT jack.
Rear panel of the ES08 Subwoofer with connection ports.
Instruccions de funcionament
Controls i ajustos
The ES08 Subwoofer features an intuitive control panel for managing audio settings and LED lights.
Control panel of the ES08 Subwoofer.
- Control de guany: Ajusteu el nivell de volum del subwoofer.
- Crossover: Set the low pass filter between 20 Hz and 275 Hz to control the frequency range of the bass output.
- Fase: Adjust the phase to optimize bass integration with other speakers.
- Llums LED: Cycle through various multi-color LED options (solid green, red, white, blue), music sync, fading, or turn them off.
A wired remote gain controller is included for convenient on-the-fly volume adjustments.
The ES08 Subwoofer displaying its blue LED illumination.
EcoCast Compatibility
The ES08 Subwoofer is EcoCast compatible, allowing it to wirelessly connect with any other ECOXGEAR EcoCast enabled audio product for an expanded sound system.
Official product video demonstrating the features and use of the ECOXGEAR SoundExtreme ES08 Subwoofer, including its EcoCast compatibility, LED lights, and rugged design.
Manteniment
To ensure the longevity and optimal performance of your ECOXGEAR SoundExtreme ES08 Subwoofer, follow these maintenance guidelines:
- Neteja: The subwoofer is waterproof and dustproof (IPX6 rated). It can be washed with a hose to remove mud, sand, or snow. Avoid using harsh chemicals or abrasive cleaners.
- Emmagatzematge: When not in use for extended periods, store the subwoofer in a cool, dry place away from direct sunlight and extreme temperatures.
- Connexions: Comproveu periòdicament totes les connexions dels cables per assegurar-vos que estiguin ben fixades i que no presentin corrosió.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| No power/Subwoofer does not turn on. | Power cable not connected securely; No 12V DC power; Auto-on mode not triggered. | Check power cable connection. Verify 12V DC power supply. Ensure audio signal or ignition is active to trigger auto-on. |
| No sound or low bass output. | Audio cable not connected; Gain set too low; Crossover setting incorrect; Source device volume low. | Ensure 3.5mm audio cable is connected. Increase gain using the control panel or remote. Adjust crossover frequency. Increase volume on the connected audio source. |
| So distorsionat. | Gain set too high; Source audio is distorted. | Reduce the gain level. Check the audio source for distortion. |
| Els llums LED no funcionen. | LED mode set to 'off'; Power issue. | Cycle through LED modes using the control panel. Ensure the subwoofer has power. |
| Cannot EcoCast pair. | Other EcoCast device not in pairing mode or out of range. | Ensure both devices are in EcoCast pairing mode and within range (up to 100 feet). |
Especificacions
| Característica | Detall |
|---|---|
| Nom del model | SoundExtreme ES08 Subwoofer |
| Tipus d'altaveu | Subwoofer |
| Diàmetre del subwoofer | 8 polzades |
| Potència màxima de sortida | 500 watts (250 W RMS) |
| AmpTipus més viu | Classe D incorporada |
| Nivell de resistència a l'aigua | IPX6 Waterproof & Dustproof |
| Tecnologia de connectivitat | Wireless (EcoCast), Wired (3.5mm AUX) |
| Interval Bluetooth | Fins a 100 peus |
| Gamma Crossover | 20 Hz a 275 Hz |
| Llums LED | Multi-color (Green, Red, White, Blue), Music Sync, Fading |
| Font d'alimentació | 12V CC (amb cable elèctric) |
| Dimensions del producte (P x A x A) | 13.9" x 8.9" x 9.1" |
| Pes de l'article | 16.9 lliures |
| Dispositius compatibles | Smartphones, Tablets, Soundbars, Amplifiers, Stereos |
| Tipus de servei del vehicle | ATV, Boat, Golf Cart, UTV |
Garantia i Suport
The ECOXGEAR SoundExtreme ES08 Subwoofer comes with a limited warranty. For specific warranty terms and conditions, please refer to the warranty information provided with your product or visit the official ECOXGEAR weblloc.
For technical support, troubleshooting assistance, or warranty claims, please contact ECOXGEAR customer service. Contact information can typically be found on the manufacturer's weblloc o a l'embalatge del producte.
Recursos en línia:
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.