1. Benvingut
Thank you for choosing the ASHATA FG-100 DDS Function Generator. This device is designed for generating various waveforms with high precision and stability, making it suitable for a wide range of electronic testing and calibration applications. Please read this manual thoroughly before operation to ensure proper use and to maximize the lifespan of your device.
2. Característiques del producte
- Generates main output waveforms including sine, square, triangle, and sawtooth.
- Features a filter (toggle on/off) for sine and pulse outputs.
- High precision and stable frequency, ideal for oscilloscope scan time calibration.
- Square wave output suitable for oscilloscope attenuators and probe pulse adjustment.
- Compact size, multi-functional, simple operation, and portable design.
3. Contingut del paquet
- 1 x ASHATA FG-100 DDS Function Generator
- 1 x cable USB
- 1 x manual d'instruccions
4. Precaucions de seguretat
- Always use the specified power supply (DC 3.5-10V, DC 5V adapter or 3.7V recommended).
- No exposeu el dispositiu a la humitat ni a temperatures extremes.
- Eviteu deixar caure o sotmetre el dispositiu a forts impactes.
- No intenteu desmuntar ni modificar el dispositiu, ja que això anul·larà la garantia i pot causar danys.
- Mantenir fora de l'abast dels nens.
5. Guia de configuració
5.1 Connexió de potència
Connect the provided USB cable to the DC 5V input port on the side of the function generator and to a suitable USB power source (e.g., a computer USB port, a USB wall adapter).
Figure 1: ASHATA FG-100 DDS Function Generator connected via USB cable.
5.2 Encès inicial
Once power is connected, the device will automatically power on, and the LCD display will illuminate, showing the current waveform function and frequency.
6. Instruccions de funcionament
6.1 S'ha acabat la interfícieview
The front panel of the FG-100 features an LCD display, several buttons for control, and an amplitude adjustment knob. The output is provided via a BNC connector.
Figure 2: Front panel controls and display of the FG-100.
6.2 Selecting Waveforms
Premeu el botó MODE button to cycle through the available waveform types: Sine, Square, Triangle, Forward Sawtooth, Reverse Sawtooth, Pulse, and ECG. The selected waveform will be displayed on the LCD.
6.3 Adjusting Frequency
Utilitza el CURSOR button to select the digit you wish to adjust. Then, use the + i - buttons to increase or decrease the frequency value. The frequency range for sine waves is 1Hz to 500kHz (amplitude flat up to 200kHz), and for other waveforms, it is 1Hz to 20kHz for optimal phase noise and distortion.
6.4 Ajust Amplitude and DC Offset
- Amplitud (AMP): Gira el AMP knob on the right side of the device to adjust the output waveform amplitude. The maximum output amplitude is ±10V (peak-to-peak).
- Offset DC: Utilitza el DESPLAÇAMENT DE CC switch (ON/OFF) and the associated knob to apply or adjust a DC bias to the waveform. The maximum DC offset is ±10V.
6.5 Using the Filter
Premeu el botó FILTRE button to toggle the internal filter on or off. This filter is designed for sine and pulse waveforms.
6.6 Outputting Waveforms
Premeu el botó CARRER/PARAR button to start or stop the waveform output. When running, the waveform will be generated at the FORA Connector BNC.
6.7 Operational Demonstration
Video 1: Demonstration of waveform selection, frequency adjustment, and output control on a similar DDS Function Generator (FG-200).
7. Especificacions tècniques
| Especificació | Valor |
|---|---|
| Tipus d'element | Generador de funcions |
| Material | ABS |
| Frequency Range (Sine) | 1Hz~500kHz (Magnitude flat up to 200kHz) |
| Frequency Range (Other Waveforms) | 1Hz~20kHz (with good phase noise and small distortion) |
| Resolució | 1 Hz |
| Formes d'ona de sortida | Sine, Square, Triangle, Forward Sawtooth, Reverse Sawtooth, Pulse, ECG |
| Sine Distortion | 1% (frequency = 1kHz) |
| Sortida Ampla latitud | Maximum ±10V (P-P) |
| Impedància de sortida | 50 ohms |
| Offset de corrent continu | Maximum ±10V (can be turned off) |
| Filtre intern | For sine or pulse, can be turned on/off |
| Font d'alimentació | DC 3.5-10V (DC 5V adapter or 3.7V recommended) |
| Pes de l'article | 240 g |
| Fabricant | ASHATA |
| Número de model | RRCc16w9sb5kxiua361 |
| País d'origen | Xina |
8. Cura i Manteniment
- Neteja: Feu servir un drap suau i sec per netejar l'exterior del dispositiu. No utilitzeu productes de neteja abrasius ni dissolvents.
- Emmagatzematge: Store the function generator in a cool, dry place away from direct sunlight and extreme temperatures.
- Manipulació: Handle the device with care to avoid damage to the display or connectors.
9. Guia de resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El dispositiu no s'encén. | No power, faulty USB cable, or power source issue. | Ensure USB cable is securely connected. Try a different USB port or power adapter. Verify power source is active. |
| No waveform output. | Output stopped, incorrect settings, or faulty connection. | Press the RUN/STOP button to start output. Check frequency and amplitude settings. Ensure output cable is correctly connected to the BNC port. |
| Settings are not saved after power off. | This model does not feature memory retention for settings. | Settings must be re-entered after each power cycle. |
| Inaccurate frequency output. | Calibration needed or external interference. | Use an external frequency counter or oscilloscope to verify and adjust settings if necessary. Ensure proper grounding. |
10. Garantia i atenció al client
ASHATA products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official ASHATA weblloc web. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.