Informació important de seguretat
Please read these instructions carefully before installation. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer. The manufacturer is not liable for damage or injury caused by incorrect assembly or use.
- Capacitat de pes: Do not exceed the maximum weight capacity specified for your model. Overloading can result in serious injury or property damage.
- Estructura de la paret: The wall mount must be securely attached to a suitable wall structure. Do not install on drywall alone. Ensure the mounting surface can safely support the combined weight of the mount and the television.
- Compatibilitat VESA: Verify your TV's VESA mounting pattern (hole spacing) is compatible with this mount.
- Nens: Mantingueu els nens allunyats de la zona d'instal·lació. Les peces petites poden ser un perill d'asfíxia.
- Eines: Utilitzeu les eines adequades per a la instal·lació.
Compatibilitat de productes
This instruction manual covers two models of PERLESMITH Full Motion TV Wall Mounts, PSMFK7 and PSMFK1. Please identify your model and confirm your television's specifications before proceeding with installation.
Model PSMFK7
- Compatibilitat de la mida de la pantalla: Most 26-55 inch TVs.
- Capacitat de pes: Up to 70 lbs (31.7 kg).
- Patrons VESA: 100x100mm to 400x400mm.
Figure 1: PSMFK7 Model Compatibility Overview. This image illustrates the supported screen sizes (26-55 inches), maximum weight capacity (70 lbs), and VESA mounting patterns (100x100mm to 400x400mm) for the PSMFK7 TV wall mount.
Model PSMFK1
- Compatibilitat de la mida de la pantalla: Most 26-60 inch TVs.
- Capacitat de pes: Up to 77 lbs (35 kg).
- Patrons VESA: Up to 400x400mm (16x16 inches).
Figure 2: PSMFK1 Model Compatibility and Wall Types. This image details the wide compatibility of the PSMFK1 model, supporting TVs up to 60 inches and various VESA patterns. It also indicates suitability for single wood stud, brick, and concrete walls.
Confirm Before Purchase
Abans de la compraasing or installing, ensure your TV meets the following criteria:
- Pes del televisor: Your TV's weight is within the mount's capacity (70 lbs for PSMFK7, 77 lbs for PSMFK1).
- Mida del televisor: Your TV's screen size is within the recommended range (26-55" for PSMFK7, 26-60" for PSMFK1).
- Patró VESA: Your TV's VESA mounting holes match one of the supported patterns.
- Tipus de paret: Your wall is suitable for installation (single wood stud, concrete, or brick).
- Cable Blockage: Ensure the mounting holes on your TV do not block any cables or inputs.
Figure 3: Pre-Purchase Confirmation Checklist. This image provides a visual summary of essential checks to perform before installing the TV mount, including TV weight, size, VESA, wall type, and potential cable interference.
Què s'inclou
Carefully unpack the box and ensure all parts are present and undamaged. If any parts are missing or damaged, do not attempt to install. Contact customer service for assistance.
Figure 4: Package Contents. This image displays the main components of the PERLESMITH full motion TV wall mount kit, including the mount assembly, a bubble level for installation, and cable ties for cable management.
Typical Package Contents:
- Muntatge de paret per a TV de moviment complet
- Suports per a TV (x2)
- Kit de ferreteria de muntatge (diversos cargols, volanderes, separadors, ancoratges)
- Nivell de bombolla
- Lligadures de cable (x3)
- Manual d'instruccions
Configuració i instal·lació
Proper installation is crucial for the safety and stability of your TV. Follow these steps carefully.
Abans de començar
- Gather all necessary tools (e.g., drill, stud finder, level, screwdriver, tape measure).
- Ensure you have a clear, safe workspace.
- Confirm your TV and wall meet the compatibility requirements.
Wall Type Considerations
This mount is designed for installation on:
- Single Wood Stud: Locate the center of the wood stud using a stud finder.
- Solid Concrete Wall: Requires a masonry drill bit and concrete anchors.
- Mur de maó: Requires a masonry drill bit and brick anchors.
ADVERTIMENT: Do not install this TV mount on drywall alone. Drywall cannot support the weight of the mount and TV.
Passos generals d'instal·lació
- Fixeu els suports de TV al televisor: Secure the vertical TV brackets to the back of your television using the appropriate screws, washers, and spacers from the hardware kit. Ensure the brackets are centered and level.
- Determine Wall Plate Position: Mantingueu la placa de paret contra la paret a la posició desitjada viewing height. Use the included bubble level to ensure it is perfectly horizontal. Mark the drilling locations.
- Perforar forats pilot: Drill pilot holes at the marked locations. For wood studs, drill directly. For concrete or brick, use a masonry bit and insert concrete/brick anchors.
- Placa de paret segura: Fixeu la placa de paret a la paret amb els cargols i les volanderes. Estrenyeu-la fermament, però no l'estrenyeu massa.
- Penjar el televisor a la placa de paret: Carefully lift the TV (with brackets attached) and hook the brackets onto the wall plate. Ensure the TV is securely seated.
- Fixar el televisor al muntatge: Use the safety screws or locking mechanisms on the TV brackets to secure the TV to the wall mount, preventing accidental dislodgement.
Figure 5: Centering Your TV. This image demonstrates a TV mounted centrally on a wall, providing a visual guide for optimal placement above a feature like a fireplace.
Figure 6: Corner Mounting Example. This image illustrates how the full motion design allows for effective TV placement in a room corner, maximizing viewangles d'ajust.
Ajustaments de funcionament
The full motion design allows for flexible viewing angles. Adjustments can be made after installation.
- Inclinació: The TV can be tilted +5° upwards to -15° downwards to reduce glare or optimize viewing from different heights. Loosen the tilt knobs on the TV brackets, adjust to the desired angle, and re-tighten.
- Girar: The articulating arm allows the TV to swivel up to +/-90° (180° total range) left or right, depending on TV size and wall distance. Gently push or pull the TV to the desired angle.
- Extensió/Retracció: The mount can extend the TV up to 19.17 inches (48.7 cm) from the wall for optimal viewing or retract it back to 3.2 inches (8.1 cm) for a low-profile mira.
- Nivell: After installation, the TV can be leveled +/-3° to correct any minor misalignments. Loosen the leveling screws, adjust, and re-tighten.
Figure 7: Full Motion Adjustments. This image visually explains the tilt, extension, swivel, and leveling features of the TV mount, demonstrating the range of motion available for optimal viewing.
Manteniment
Un manteniment regular garanteix la longevitat i el funcionament segur del suport de paret per a televisors.
- Neteja: Netegeu el suport amb un drap suau i sec per eliminar la pols. Eviteu netejadors o dissolvents abrasius.
- Comproveu les connexions: Reviseu periòdicament tots els cargols i connexions per assegurar-vos que estiguin ben ajustats i segurs. Torneu a apretar-los si cal.
- Inspeccionar per danys: Regularly inspect the mount for any signs of wear, corrosion, or damage. If any issues are found, discontinue use and contact customer support.
Resolució de problemes
Si teniu problemes durant o després de la instal·lació, consulteu els problemes i solucions habituals següents.
| Problema | Causa possible | Solució |
|---|---|---|
| El televisor no està anivellat després de la instal·lació. | Petit desajust durant la instal·lació. | Use the +/-3° leveling adjustment feature. Loosen leveling screws, adjust, and re-tighten. |
| La muntura sembla fluixa o inestable. | Screws not fully tightened; incorrect wall anchors used; wall structure insufficient. | Ensure all mounting screws are securely tightened. Verify correct anchors for your wall type. If the wall is insufficient, consult a professional. |
| Difficulty adjusting tilt or swivel. | Adjustment knobs/bolts are too tight. | Loosen the relevant adjustment knobs or bolts slightly, make the adjustment, then re-tighten to hold the position. |
| El televisor no encaixa amb el suport. | Incorrect TV size, weight, or VESA pattern for the mount model. | Verify your TV's specifications against the mount's compatibility (refer to Product Compatibility section). |
Especificacions del producte
| Característica | PSMFK7 Model | PSMFK1 Model |
|---|---|---|
| Tipus de muntatge | Muntatge de paret | |
| Tipus de moviment | Articulat, giratori, inclinable | |
| Mides de pantalla compatibles | 26 - 55 polzades | 26 - 60 polzades |
| Capacitat màxima de pes | 70 lliures (31.7 kg) | 77 lliures (35 kg) |
| Compatibilitat VESA | 100x100mm a 400x400mm | Fins a 400x400mm |
| Angle d'inclinació | +5° / -15° | |
| Angle de gir | +/-90° (up to 180° total, depending on TV size) | |
| Ajust d'anivellament | +/-3° | |
| Extensió des de la paret | 3.2 polzades (retret) a 19.17 polzades (estès) | |
| Material | Acer d'aliatge | |
| Tipus de paret compatibles | Single Wood Stud, Solid Concrete, Brick Wall | |
Garantia i Suport
For warranty information or technical support, please refer to the product packaging or contact PERLESMITH customer service directly. Keep your purchase receipt for warranty claims.
If you have any questions or require assistance with installation or operation, please do not hesitate to reach out to our support team.