AUTOOL CS605 OBD2 Scanner User Manual

Producte acabatview

The AUTOOL CS605 OBD2 Scanner is a professional diagnostic tool designed for automotive technicians and DIY enthusiasts. It offers comprehensive vehicle system diagnosis and a range of special service functions to identify and resolve vehicle issues efficiently.

Image: The AUTOOL CS605 diagnostic scanner, showcasing its user interface with options for Diagnose, Special Function, OBDII, Settings, Update, and About.

Característiques principals:

• Diagnòstic de tot el sistema: Capable of diagnosing issues across PCM (Drive System), Chassis System, BCM (Body System), and Electrical System.
• Five Special Service Resets: Includes Oil Reset, Electronic Parking Brake (EPB) Reset, Steering Angle Sensor (SAS) Calibration, Anti-lock Braking System (ABS) Bleeding, and Throttle Learn.
• 10 Modes OBDII Function: Supports full OBDII functions such as Reading Codes, Erasing Codes, Data Stream, I/M Readiness Status, Live Data Stream, Freeze Frame Data, O2 Sensor Test, On-Board Monitor Test, Read Vehicle Information, and Active Test.
• AUTOVIN Function: Provides quick and easy vehicle diagnosis by automatically identifying VIN information.
• Bi-Directional Control / Active Test: Allows the tool to send commands to vehicle systems to perform specific tests, such as activating fuel pumps or A/C clutches.
• Suport en diversos idiomes: Offers a wide range of language options for global usability.
• Actualitzacions gratuïtes de per vida: Software updates are available free of charge via Wi-Fi or USB connection.

Configuració i ús inicial

Before using your AUTOOL CS605 scanner, ensure your vehicle's ignition is in the ON position (engine off or running, depending on the test). The device is designed for plug-and-play operation.

1. Localitza el port OBDII: The OBDII port is typically located under the dashboard on the driver's side, though its exact position may vary by vehicle model.
2. Connecteu l'escàner: Plug the diagnostic cable from the AUTOOL CS605 into the vehicle's OBDII port. Ensure a secure connection.
3. Encès: The scanner will automatically power on once connected to the vehicle's OBDII port.
4. Configuració inicial: Upon first use, you may be prompted to select your preferred language and time zone. Follow the on-screen instructions.
5. AUTOVIN Function: The device features an AUTOVIN function that can automatically identify your vehicle's VIN for quick diagnosis. Allow the scanner to perform this function or manually enter VIN if prompted.

Instruccions de funcionament

1. Diagnòstic de tot el sistema

This function allows you to scan and diagnose all available electronic control systems in the vehicle, including the Powertrain Control Module (PCM), Chassis System, Body Control Module (BCM), and Electrical System. This comprehensive scan helps identify fault codes and live data from various vehicle components.

Image: Visual representation of the four main diagnostic systems covered by the AUTOOL CS605: PCM (Drive System), Chassis System, BCM (Body System), and Electrical System.

• Al menú principal, seleccioneu "Diagnòstic".
• Choose "Auto Scan" or select a specific system for diagnosis.
• The scanner will communicate with the vehicle's ECUs and display any detected Diagnostic Trouble Codes (DTCs) and live data.

2. 5 Special Service Resets

The CS605 provides access to five commonly used maintenance and reset functions:

Image: Icons illustrating the five special service resets available: Oil Reset, SAS Calibration, EPB Reset, ABS Bleeding, and Throttle Learn.

• Reinicialització d'oli: Restableix el sistema de vida útil de l'oli del motor després d'un canvi d'oli.
• Restabliment de l'EPB: Restableix el sistema de fre d'estacionament electrònic després de la substitució de les pastilles de fre.
• Calibració SAS: Calibra el sensor d'angle de direcció després de reparacions o alineacions del sistema de direcció.
• Sagnat de l'ABS: Performs bleeding procedures for the Anti-lock Braking System.
• Throttle Learn: Relearns the throttle body position after cleaning or replacement.
• To access these functions, select "Special Function" from the main menu and choose the desired reset. Follow the on-screen prompts carefully.

3. 10 Modes OBDII Function

This section covers standard OBDII diagnostic functions, essential for emissions-related checks and basic engine diagnostics.

Image: A comprehensive display of the 10 OBDII mode functions, including reading and clearing codes, viewing live data, I/M readiness, and more.

• From the main menu, select "OBDII".
• Llegir codis: Mostra els codis de diagnòstic d'errors (DTC) actuals, pendents i permanents.
• Esborra codis: Esborra els DTC de l'ordinador del vehicle i apaga l'indicador de fallades Lamp (MIL).
• Flux de dades: Shows real-time data from various sensors and components.
• Estat de preparació I/M: Comprova l'estat dels monitors relacionats amb les emissions.
• View Congela les dades del fotograma: Displays a snapshot of vehicle conditions when an emission-related fault code was set.
• Prova del sensor d'O2: Recupera els resultats de la prova de monitorització del sensor d'O2.
• Prova del monitor integrat: Recupera resultats per a components i sistemes de transmissió relacionats amb les emissions que no es controlen contínuament.
• Llegir la informació del vehicle: Displays the vehicle's VIN, Calibration ID (CALID), and Calibration Verification Number (CVN).
• Prova activa: Allows the scanner to control vehicle components for testing purposes.

4. Bi-Directional Control / Active Test

This advanced function allows the diagnostic tool to send commands to the vehicle's Electronic Control Units (ECUs) to activate specific components or perform tests. This is crucial for verifying the functionality of actuators and diagnosing issues that cannot be identified through passive monitoring.

Imatge: Examples of bi-directional control tests, specifically for the fuel pump and A/C clutch, demonstrating the scanner's ability to command vehicle components.

• From the main menu, navigate to "Diagnose" and then select the specific system or function that supports active tests.
• Common active tests include turning the fuel pump on/off, cycling the A/C clutch, or performing evaporative emissions leak tests.
• Follow the on-screen instructions to perform the desired active test. Observe the component's response to verify its operation.

5. Multi-Language Options and Software Updates

The AUTOOL CS605 supports a wide array of languages for user convenience and offers flexible software update options.

Image: The scanner's interface displaying various language options and an indicator for Wi-Fi connectivity for software updates.

• Selecció d'idioma: To change the language, go to "Settings" from the main menu and select "Language". Choose from English, Portuguese, Hungarian, Russian, Polish, Dutch, Italian, Spanish, French, German, Turkish, Simplified Chinese, Traditional Chinese.
• Actualitzacions de programari: The device supports lifetime free updates via Wi-Fi or USB.
  • Actualització Wi-Fi: Connect the device to a stable Wi-Fi network via "Settings" > "WLAN". Then, select "Update" from the main menu to check for and install available updates.
  • Actualització USB: Connect the scanner to a computer using the provided USB Type-C cable. Follow instructions on the AUTOOL website for PC-based updates.

Manteniment i cura

Proper maintenance ensures the longevity and optimal performance of your AUTOOL CS605 scanner.

• Neteja: Feu servir un drap suau i sec per netejar el dispositiu. Eviteu utilitzar productes de neteja abrasius o dissolvents que puguin danyar la pantalla o el dispositiu.asing.
• Emmagatzematge: Store the scanner in a cool, dry place, away from direct sunlight and extreme temperatures. Use the provided carrying case for protection when not in use.
• Cura del cable: Inspect the diagnostic cable regularly for any signs of wear or damage. Do not bend or crimp the cable excessively.
• Actualitzacions de programari: Regularly check for and install software updates to ensure compatibility with the latest vehicle models and to access new features and bug fixes.

Resolució de problemes

If you encounter issues while using your AUTOOL CS605, refer to the following common troubleshooting steps:

For issues not covered here, please contact AUTOOL customer support.

Especificacions del producte

Garantia i Suport

AUTOOL is committed to providing high-quality products and customer satisfaction.

• Actualitzacions gratuïtes de per vida: The AUTOOL CS605 comes with lifetime free software updates, ensuring your device remains compatible with new vehicle models and features. Regularly check for updates via Wi-Fi or USB.
• Atenció al client: For technical assistance, troubleshooting, or compatibility inquiries, please contact AUTOOL customer support. When contacting support, please have your product model (CS605) and vehicle VIN (if applicable) ready.
• Nota de compatibilitat: As stated in the product features, service functions and special functions are not universally compatible with all vehicles. It is recommended to send your vehicle's VIN to AUTOOL support to check compatibility for specific functions before purchase or use.