1. Introducció
This manual provides detailed instructions for the setup, operation, and maintenance of your Odokee Digital Dual Alarm Clock, Model UE218-Wood-1. Please read this manual thoroughly before using the product to ensure proper function and longevity.
Figure 1: Odokee Digital Dual Alarm Clock (Model UE218-Wood-1)
2. Característiques del producte
- Easy Setup & Dimmable Display: Intuitive controls with clearly labeled buttons. Large 1.6-inch white LED digits with 0-100% adjustable brightness via a dimmer dial.
- Customizable Dual Alarms: Set two independent alarms with 7-5-2 alarm modes (every day, weekdays, or weekends).
- 5 Alarm Sounds: Choose from Beep, Birds Chirping, Buzzer, Soft Music, or Siren. Alarm volume is adjustable from 30dB to 110dB.
- Easy Snooze: A large, accessible snooze button provides an additional 9 minutes of rest.
- Port de càrrega USB: Integrated USB port for charging mobile devices.
- Còpia de seguretat de la bateria: Requereix 3 piles AAA (no incloses) per mantenir la configuració de l'hora i l'alarma durant l'apagadatages.
- Visualització de l'hora: Admet els formats de 12 hores i de 24 hores.
3. Configuració
3.1 Connexió d'alimentació
- Connect the provided AC adapter to the DC 5V input port on the back of the alarm clock.
- Plug the AC adapter into a standard wall outlet. The display will light up.
Figure 2: Powering the Alarm Clock
3.2 Instal·lació de la bateria de reserva
For battery backup functionality, install 3 AAA batteries (not included) into the battery compartment located on the bottom of the clock. This ensures time and alarm settings are retained during a power outage. Note that the display will not remain continuously lit and the USB charging port will not function when operating solely on battery backup.
4. Instruccions de funcionament
Figure 3: Rear Controls Overview
4.1 Configuració de l'hora
- Manteniu premut el botó HORA CONFIGURADA button on the back of the clock. The hour digits will begin to flash.
- Utilitza el HORA i MIN buttons on the top of the clock to adjust the hour and minute respectively.
- Premeu HORA CONFIGURADA de nou per confirmar l'hora.
- To set the day of the week, press the DIA DE LA SETMANA button repeatedly until the correct day is displayed.
Format 4.2 12/24 hores
Premeu el botó 12/24 h button on the back of the clock to switch between 12-hour (with AM/PM indicator) and 24-hour time formats.
Figure 4: 12-Hour vs. 24-Hour Display
4.3 Configuració d'alarmes (alarma 1 i alarma 2)
The clock features two independent alarms. The setup process is identical for both.
- Manteniu premut el botó CONJUNT ALARMA 1 or CONJUNT ALARMA 2 botó. Els dígits de l'hora de l'alarma parpellejaran.
- Utilitza el HORA i MIN botons per configurar l'hora d'alarma desitjada.
- Premeu el botó corresponent CONJUNT D'ALARMES de nou el botó per confirmar l'hora.
- Next, the alarm mode will flash. Use the SON D’ALARMA button to cycle through the 7-5-2 alarm modes:
- DS-DG: Weekend alarm (Saturday and Sunday only).
- DL-DV: Weekday alarm (Monday to Friday only).
- DL-DG: All 7 days alarm.
- Premeu el botó corresponent CONJUNT D'ALARMES button again to confirm the alarm mode.
- Per activar o desactivar una alarma, premeu la tecla ON/OFF button located on the front side of the clock corresponding to Alarm 1 or Alarm 2. An alarm icon (1 or 2) will appear on the display when active.
Figure 5: Dual Alarms with 7-5-2 Modes
Figure 6: Alarm 1 and Alarm 2 Indicators
4.4 Selecting Alarm Sounds
After setting the alarm time and mode, you can select one of five alarm sounds:
- During alarm setting, after confirming the alarm mode, the current alarm sound will flash.
- Premeu el botó SON D’ALARMA button repeatedly to cycle through the available sounds: Beep, Birds Chirping, Buzzer, Soft Music, or Siren.
- Premeu el botó corresponent CONJUNT D'ALARMES botó per confirmar la selecció.
Figure 7: Selectable Alarm Sounds
4.5 Ajust del volum de l'alarma
The alarm volume can be adjusted from 30dB (low) to 110dB (high) using the VOLUM dial located on the left side of the clock.
4.6 Funció de repetició
Quan soni una alarma, premeu la tecla gran DORMITAR button on the top of the clock to temporarily silence the alarm for 9 minutes. The alarm will sound again after 9 minutes.
Figure 8: Using the Snooze Function
4.7 Ajust de la brillantor de la pantalla (regulador d'intensitat)
The display brightness can be adjusted from 0% (fully dark) to 100% (very bright) using the DIMMER dial located on the right side of the clock.
Figure 9: Display Brightness Adjustment
4.8 port de càrrega USB
A USB charging port is located on the back of the clock. Connect your mobile device's USB cable to this port to charge it. This port is active only when the clock is powered by the AC adapter.
Figure 10: USB Charging Port in Use
5. Battery Backup Functionality
The battery backup feature requires 3 AAA batteries (not included). When AC power is interrupted, the batteries will preserve the time and alarm settings. The display will turn off to conserve battery power, but the internal clock will continue to run, and alarms will still activate at the set time. The USB charging port will not function during battery backup mode. It is recommended to use the battery backup only for power outage situations, as continuous use on batteries will drain them quickly.
6. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Display is blank or not lighting up. | Sense corrent, apagadatage, or dimmer set to 0%. | Ensure AC adapter is securely plugged in. Check power outlet. Adjust the DIMMER dial. If on battery backup, press any button to briefly illuminate the display. |
| L'alarma no sona. | Alarm not activated, volume too low, or incorrect alarm mode. | Ensure the alarm is activated (alarm icon visible). Adjust the VOLUME dial. Verify the alarm mode (7-5-2) is set correctly for the current day. |
| L'hora és incorrecta. | Time not set correctly, or power interruption without battery backup. | Re-set the time using the TIME SET button. Install fresh AAA batteries for backup. |
| La càrrega USB no funciona. | Clock is on battery backup, or cable/device issue. | Ensure the clock is connected to AC power. Try a different USB cable or device to rule out external issues. |
7. Especificacions
- Marca: Odokee
- Número de model: UE218-Wood-1
- Tipus de visualització: LED digital (blanc)
- Mida de la pantalla: 1.6 inches (digit height)
- Dimensions del producte: 5.3"W x 2.9"H x 1.95"D (approximate, based on image a7e9cdcf-2bbb-4f2d-b58e-081cedcaeaaa)
- Font d'alimentació: Corded Electric (AC adapter included), 3x AAA batteries for backup (not included)
- Sons d'alarma: 5 selectable (Beep, Birds Chirping, Buzzer, Soft Music, Siren)
- Volum de l'alarma: Adjustable (30dB-110dB)
- Brillantor de la pantalla: 0-100% adjustable dimmer
- Durada de la posposació: 9 minuts
- Format horari: 12/24 hores seleccionables
- Material: Plàstic (acrilonitril butadiè estirè)
- Pes de l'article: 6.3 unces (178.6 grams)
Figura 11: Dimensions del producte
8. Garantia i Suport
Odokee products come with a hassle-free 18-month warranty. For any questions, issues, or warranty claims, please contact Odokee customer service. Odokee is dedicated to providing functional and stylish products and values customer feedback.
You can visit the official Odokee store for more information: Odokee Store on Amazon.