XPG Cybercore 1300W Modular Power Supply User Manual

1. Introducció

The XPG Cybercore 1300W Modular Power Supply is designed for high-performance computing, offering 80 Plus Platinum efficiency and robust power delivery. This manual provides essential information for the proper installation, operation, and maintenance of your power supply unit.

Figure 1: XPG Cybercore 1300W Modular Power Supply Unit.

2. Configuració i instal·lació

Proper installation is crucial for the optimal performance and longevity of your XPG Cybercore PSU. Follow these steps carefully.

2.1 Desembalatge i contingut del paquet

Before beginning installation, ensure all components are present and undamaged.

Figure 2: Contents of the XPG Cybercore 1300W Power Supply package, including the PSU, modular cables, power cord, and documentation.

El paquet normalment inclou:

• XPG Cybercore 1300W Power Supply Unit
• Modular Cable Set (various PCIe, SATA, CPU, Motherboard cables)
• Cable d'alimentació CA
• Cargols de muntatge
• Guia d'inici ràpid i informació de garantia

2.2 Instal·lació física

1. Prepare your PC Case: Ensure your PC case is powered off and unplugged. Remove the side panel to access the PSU mounting area.
2. Muntar la font d'alimentació: Position the XPG Cybercore PSU in the designated power supply bay of your PC case. Secure it using the provided mounting screws.
3. Connecteu els cables modulars: Identify the necessary cables for your motherboard, CPU, GPU, and storage devices. Connect them to the corresponding ports on the modular PSU.
   

   Figure 3: Diagram showing the modular cable connection ports on the XPG Cybercore Power Supply.
   • Placa base: Connect the 24-pin ATX cable.
   • CPU: Connect the 8-pin (or 4+4-pin) EPS cable(s) to your motherboard.
   • GPU (PCIe): Connect the appropriate PCIe cables (e.g., 6+2 pin, 12VHPWR) to your graphics card. The XPG Cybercore 1300W supports ATX 3.0 and PCIe 5.0, including the 12VHPWR connector for modern GPUs.
   • Storage (SATA/Molex): Connect SATA power cables to SSDs/HDDs and Molex cables for other peripherals as needed.
4. Gestió de cables: Route cables neatly behind the motherboard tray or through designated channels in your case to ensure optimal airflow and a clean build.
5. Connexions finals: Connect the other ends of the modular cables to your components. Double-check all connections to ensure they are secure.
6. Connecteu l'alimentació de CA: Plug the AC power cord into the PSU and then into a wall outlet.

3. Instruccions de funcionament

The XPG Cybercore PSU is designed for efficient and quiet operation. Understand its features for optimal use.

3.1 Engegada/apagada

• Encès: After all connections are secure, flip the main power switch on the back of the PSU to the 'I' (On) position. Then, power on your computer via the case power button.
• Apagar: Shut down your computer through the operating system. Once the system is off, you can optionally flip the main power switch on the PSU to the 'O' (Off) position for complete power disconnection.

3.2 Intelligent Low-Noise Fan-Curve and ECO Mode

The XPG Cybercore PSU features an intelligent fan control system with an ECO mode for quiet operation.

Figure 4: Power Supply Fan Curve illustrating fan speed relative to load conditions, demonstrating quiet operation at lower loads.

• The fan is designed to operate silently at low loads, only increasing speed as power demand rises.
• If an ECO mode switch is present on your PSU, activating it will enable a Zero RPM Fan Mode, where the fan will not spin under low load conditions (typically below 30% load) for silent operation.

4. Manteniment

Regular maintenance helps ensure the longevity and stable performance of your power supply.

• Neteja de pols: Periodically clean dust from the PSU fan and ventilation grilles using compressed air. Ensure the PSU is powered off and unplugged before cleaning.
• Inspecció del cable: Check all modular cable connections regularly to ensure they are firmly seated. Loose connections can lead to instability or component damage.
• Medi ambient: Ensure the PC operates in a well-ventilated area to prevent overheating. Avoid placing the PC in enclosed spaces that restrict airflow.
• No obrir: Do not attempt to open the power supply unit. It contains high voltage components and poses a risk of electric shock. Opening the unit will also void the warranty.

5. Solució De Problemes

If you encounter issues with your XPG Cybercore PSU, refer to these common troubleshooting steps.

• Sense energia:
  • Assegureu-vos que el cable d'alimentació de CA estigui ben connectat tant a la font d'alimentació com a la presa de corrent.
  • Verify the main power switch on the PSU is in the 'I' (On) position.
  • Check the wall outlet with another device to confirm it has power.
  • Ensure all modular cables (24-pin ATX, CPU, GPU) are correctly and firmly connected to both the PSU and the respective components.
• Inestabilitat/Avaries del sistema:
  • Ensure your system's total power draw does not exceed the PSU's 1300W capacity.
  • Check for loose cable connections, especially to the motherboard and graphics card.
  • Monitor component temperatures to rule out overheating issues.
• Soroll excessiu del ventilador:
  • If the ECO mode is enabled, the fan should remain off at low loads. If it's constantly spinning loudly at low loads, ensure the ECO mode is functioning correctly or disable it if preferred.
  • Netegeu qualsevol acumulació de pols del ventilador i de les reixetes de ventilació.
• Burning Smell/Smoke:
  • Immediately power off and unplug the system. Do not attempt to restart it.
  • Contact XPG customer support or a qualified technician.

6. Especificacions

Detailed technical specifications for the XPG Cybercore 1300W Modular Power Supply.

Figure 5: Detailed specifications table for XPG Cybercore 1300W and 1000W models.

7. Informació de la garantia

The XPG Cybercore 1300W Modular Power Supply comes with a 10 any de garantia, reflecting its high quality and durability. Please retain your proof of purchase for warranty claims.

For detailed warranty terms and conditions, please refer to the official XPG website or the warranty card included in your product packaging.

8. Suport

For further assistance, technical support, or service inquiries, please contact XPG customer support through their official channels:

• Oficial Weblloc: Visita el XPG Official Weblloc per obtenir informació sobre el producte, preguntes freqüents i dades de contacte d'assistència.
• Atenció al client: Refer to your product's quick start guide or the XPG website for regional customer service contact information.