Sunco Lighting DL_DK56-15W-3K_65K-12PK

Sunco 6-Inch LED Flush Mount Disc Light Instruction Manual

Model: DL_DK56-15W-3K_65K-12PK

1. Introducció

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Sunco 6-Inch LED Flush Mount Disc Lights. Please read this manual thoroughly before installation and retain it for future reference.

2. Informació de seguretat

ADVERTIMENT: Risc de descàrrega elèctrica. Desconnecteu l'alimentació al fusible o al disjuntor abans de la instal·lació o el manteniment.
La instal·lació ha de ser realitzada per un electricista qualificat d'acord amb les normes elèctriques nacionals i locals.
No modifiqueu ni altereu el dispositiu.
Assegureu-vos el subministrament voltage és compatible amb els requisits de l'aparell (120 volts).
Do not handle live wires with bare hands.
Aquest producte és Damp Valorat, suitable for use in bathrooms and other damp locations, but not directly exposed to water.

3. Què hi ha a la caixa

Each Sunco 6-Inch LED Flush Mount Disc Light package includes the following components:

LED Disc Light Fixture (12 units per pack)
Connector TP24
adaptador E26
Spring Clips (pre-attached or included for installation)
Filferro
Cargols de muntatge
Manual d'instruccions

Explotat view of Sunco LED Disc Light components including friction springs, screws, LED board, and anti-yellowing lens. — **Figura 1:** Explotat view of the LED Disc Light showing its components: friction springs, included screws, energy-saving LED board, and anti-yellowing lens.

4. Instruccions d'instal·lació

The Sunco LED Disc Light offers versatile installation options for both recessed cans (5-inch or 6-inch) and junction boxes.

4.1. Eines necessàries

Tornavís
Wire Strippers (if connecting to junction box)
Ulleres de seguretat

4.2. Recessed Can Installation (5-inch or 6-inch)

Apagueu l'alimentació: Ensure power to the fixture is OFF at the circuit breaker.
Remove existing trim: Carefully remove the existing bulb and trim from the recessed can.
Connect E26 adapter: Screw the provided E26 adapter into the existing socket of the recessed can.
Connect TP24 connector: Plug the TP24 connector from the disc light into the E26 adapter's connector.
Adjust spring clips: The spring clips on the disc light can be adjusted for 5-inch or 6-inch cans. Ensure they are set to the correct position for your can size.
Insert fixture: Gently push the LED disc light into the recessed can until the spring clips secure it flush with the ceiling.

Diagram showing installation of Sunco LED Disc Light into a recessed can with TP24 connection and adjustable spring clips. — **Figura 2:** Illustration of the LED Disc Light installation into a recessed can, highlighting the TP24 connector and adjustable spring clips for 5-6 inch cans.

4.3. Instal·lació de la caixa de connexions

Apagueu l'alimentació: Ensure power to the junction box is OFF at the circuit breaker.
Prepare wires: Strip the ends of the black (live), white (neutral), and green/bare copper (ground) wires from the junction box, if necessary.
Connecteu els cables: Use the provided wire nuts to connect the corresponding wires:
- Black fixture wire to Black junction box wire.
- White fixture wire to White junction box wire.
- Green/Yellow fixture wire to Green/Bare Copper junction box wire.
Secure fixture: Use the provided mounting screws to attach the disc light's base directly to the junction box.
Attach diffuser: Twist the diffuser onto the fixture base until securely fastened.

Image showing the three ways to install the Sunco LED Disc Light: into a J-Box with wire nuts, or into an E26 can connection. — **Figura 3:** Visual guide for installing the LED Disc Light, including options for J-Box and E26 can connections.

Vídeo 1: Acabatview of Sunco 5/6-inch LED Disc Light installation, demonstrating both recessed can and junction box methods.

5. Instruccions de funcionament

5.1. Encendre/apagar

Once installed, restore power at the circuit breaker. The light can be turned on or off using a standard wall switch.

5.2. Selectable Color Temperature (CCT)

This fixture features a selectable CCT switch located on the back of the light. Before final installation, select your desired color temperature from the available options: 3000K (Warm White), 4000K (Cool White), 5000K (Daylight), 6000K (Daylight Deluxe), or 6500K (Daylight Deluxe).

Close-up of the CCT selection switch on the back of the LED Disc Light. — **Figura 4:** The CCT switch allows selection of various color temperatures.

Vídeo 2: Demonstration of the selectable color temperature feature on the Sunco 6-inch LED Disc Light.

5.3. Funcionalitat de regulació de la intensitat

The Sunco LED Disc Light is dimmable from 10% to 100% with compatible LED dimmers. Refer to the compatibility list below for recommended dimmer models.

Image illustrating the dimming range of the LED Disc Light from 10% to 100% with a dimmer switch. — **Figura 5:** The LED Disc Light supports dimming from 10% to 100% with compatible dimmers.

Reguladors compatibles:

Marca	Model	Marca	Model
LUTRÓ	MACL-153M	LUTRÓ	NLV-1000-LA
LUTRÓ	DVCL-153P	LUTRÓ	SLV-600P
LUTRÓ	PD-6WCL-WH-P	LUTRÓ	RRD-6CL
LUTRÓ	MACL-153MH	LUTRÓ	AYCL-153P
LUTRÓ	TGCL-153P	LUTRÓ	P-PKG1WB
LUTRÓ	DVCL-15PR	LEVITON	6674 600W
LUTRÓ	CTCL-153PDH	LEVITON	6672 600W
LUTRÓ	P-PKG1W	LEVITON	IPL06 600W
LUTRÓ	DVELV-300P	LEVITON	DW6HD-1BZ
LEVITON	DSL06-001-1LZ	LEVITON	RHCL453PW
LEVITON	IPL06-011-10Z	EATON	SAL06P3
LEVITON	06674-002-10W	WEMO	F7C05
LEVITON	TSM10-012-1LW	TP LINK	KASA SMART HS220
LEVITON	RDL06-001-10Z	WATTSTOPPER	DCD267
LEVITON	DSE06-001-10Z	CLOUD BAY	CBD001WH
LEVITON	DDMX1-011-BLZ
LEVITON	DDE06-BLZ 600W
LEVITON	SURSLIDE

6. Manteniment

The Sunco LED Disc Light is designed for long-lasting performance with minimal maintenance. The LED components are non-removable.

Neteja: Assegureu-vos que l'alimentació estigui apagada abans de netejar-la. Netegeu l'aparell amb un drap suau i sec.amp tela. No utilitzeu netejadors abrasius ni dissolvents.
Substitució de bombetes: Aquest llum utilitza LED integrats i no requereix substitució de bombeta.

7. Solució De Problemes

Problema	Causa possible	Solució
La llum no s’encén.	No hi ha energia a l’aparell. Connexió de cablejat solta. Interruptor defectuós.	Comproveu l'interruptor. Comproveu que totes les connexions dels cables siguin segures. Proveu o substituïu l'interruptor.
La llum parpelleja o s'atenua inesperadament.	Interruptor regulador d'intensitat incompatible. Cablejat solt. Voltage fluctuacions.	Ensure dimmer is on the compatible list. Comproveu i fixeu totes les connexions dels cables. Consulteu un electricista per al volumtage qüestions.
Temperatura de color incorrecta.	L'interruptor CCT està mal configurat.	Adjust the CCT switch on the back of the fixture to the desired setting.

8. Especificacions

Característica	Detall
Marca	Il·luminació Sunco
Número de model	DL_DK56-15W-3K_65K-12PK
Mida	6 polzades
Wattage	15 W (equivalent a 75 W)
Brillantor	1050 lúmens
Temperatura de color (CCT)	Seleccionable: 3000K, 4000K, 5000K, 6000K, 6500K
Regulable	Sí (10%-100%)
Voltage	120 Volts
CRI	90+
Vida Mitjana	50,000 hores
Material	Alumini, Policarbonat
Tipus d'instal·lació	Flush Mount, Recessed (E26/TP24)
Damp Valorat	Sí
Certificacions	ETL
Dimensions del producte	7.5 cm de llargada x 1 cm d'amplada x 7.5 cm d'alçada
Pes de l'article	7.8 lliures (per a un paquet de 12)

9. Garantia i Suport

Sunco Lighting offers a Protecció d'7 any warranty on this product. For any questions, technical assistance, or warranty claims, please contact Sunco Lighting customer support. Visit the Botiga d'il·luminació Sunco per a més informació.

Image showing Sunco's 7-year coverage and reliable customer support. — **Figura 6:** Sunco Lighting provides 7-year coverage and dedicated customer support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.