MOLLOM VFD 220V 5.5KW 7.5HP Variable Frequency Drive User Manual

1. Introducció

This manual provides essential information for the safe and efficient operation of your MOLLOM 220V 5.5KW 7.5HP Variable Frequency Drive (VFD). Please read this manual thoroughly before installation, operation, or maintenance to ensure proper usage and prevent potential hazards.

The MOLLOM VFD is designed to control the speed of three-phase AC motors, offering precise control for various applications such as CNC routers, milling machines, and pumps. It supports both single-phase and three-phase 220V input.

2. Precaucions de seguretat

Observeu sempre les següents precaucions de seguretat per evitar lesions personals o danys a l'equip.

• Risc elèctric: Ensure power is disconnected before wiring or performing maintenance. Only qualified personnel should perform electrical work.
• Posada a terra: El variador de freqüència (VFD) ha d'estar correctament connectat a terra per evitar descàrregues elèctriques.
• Connexió del motor: The frequency converter must be directly connected to the motor. Control motor start/stop exclusively through the VFD to avoid damage.
• Medi ambient: Avoid operating the VFD in humid environments, or where water mist, water droplets, or metal objects may fall into the unit, as this can cause short circuits.
• External Resistor: If your motor operates under heavy load, consider using an external braking resistor.

3. Especificacions

4. Components i dimensions del producte

The MOLLOM VFD unit includes the main inverter and a detachable control panel. Below are images illustrating the unit's appearance and dimensions.

Figura 4.1: Davant view of the MOLLOM VFD 5.5KW 7.5HP unit. This image shows the main body of the Variable Frequency Drive with its control panel integrated, displaying the brand logo and warning symbols.

Figura 4.2: Dimensions of the MOLLOM VFD. This image provides a side view of the VFD unit with measurements indicating its length (10.2 inches), width (7.3 inches), and depth (5.9 inches).

Figura 4.3: Detallada view of the VFD control panel. This image highlights the various buttons and indicators on the control panel, including the State LED, Unit LED, Code Display, UP/DOWN buttons, Potentiometer, PRG (Programming/Return), ENTER, SHIFT-Right, RUN, MF.K (Function/Jog), and STOP/RST (Stop/Reset) buttons.

Figura 4.4: MOLLOM VFD with its detachable control panel. This image shows the main VFD unit alongside its separated control panel, illustrating the remote control capability.

5. Configuració i cablejat

Proper wiring is crucial for the safe and correct operation of the VFD. Refer to the wiring diagram below and follow these instructions carefully.

Figura 5.1: Wiring diagram for connecting the VFD to a motor. This diagram illustrates the connections for single or three-phase 220V input (R, S, T terminals), grounding (PE terminal), three-phase 220V output to the motor (U, V, W terminals), and optional braking resistor connections (P+, BR terminals).

5.1 Connexió d'alimentació d'entrada

• Connect the AC 220V input power to the terminals labeled R, S, i T.
• For single-phase 220V input, connect the live wire to R and the neutral wire to T (o L i N if labeled differently).
• For three-phase 220V input, connect each phase to R, S, i T respectivament.
• Ensure proper circuit breakers are installed upstream for protection.

5.2 Connexió del motor

• Connect the three-phase motor wires to the VFD output terminals labeled U, V, i W.
• Refer to your motor's wiring diagram to ensure it is configured for 220V operation (typically Delta connection for 220V).
• If the motor rotates in the wrong direction, you can swap any two of the U, V, W output wires, or adjust the rotation direction in the VFD's parameters.
• Important: The motor must be directly connected to the VFD. Do not place any switches or contactors between the VFD and the motor.

5.3 Posada a terra

• Connect the ground wire from your power supply and the motor frame to the VFD's PE (Protective Earth) terminal.
• Ensure a solid, low-impedance ground connection.

5.4 Braking Resistor (Optional)

• For applications requiring rapid deceleration or operating with high inertia loads, an external braking resistor can be connected to terminals P+ i BR.
• Consult the VFD specifications and your application requirements to select an appropriate braking resistor.

6. Funcionament

This section covers basic operation and parameter settings for the MOLLOM VFD.

6.1 Funcions del tauler de control

• PRG (Programming/Return): Enters/exits parameter setting mode, or returns to the previous menu.
• ENTRAR: Confirms parameter changes or enters sub-menus.
• Fletxes AMUNT/AVALL: Navigate through parameters or adjust values.
• SHIFT-Right: Shifts the cursor during parameter value entry.
• CORRER: Engega el motor.
• STOP/RST: Stops the motor or resets fault conditions.
• MF.K (Function/Jog): Activates special functions or jog mode.
• Potenciòmetre: Adjusts the output frequency (speed) in manual mode.

6.2 Configuració de paràmetres bàsics

The VFD comes with default settings. You may need to adjust certain parameters for your specific motor and application. Common parameters include:

• P0.03: Control mode selection (e.g., V/F control, vector control).
• P0.04: Maximum output frequency (e.g., 60Hz for standard motors).
• P0.10: Accelerating time.
• P0.11: Decelerating time.
• F0.02: Restabliment de fàbrica.

For detailed parameter descriptions and advanced settings, refer to the comprehensive user manual PDF available for download or contact technical support.

Figura 6.1: Example of VFD parameter settings for spindle control. This image displays a table of various parameters (e.g., P0.03, P0.04, P0.10, F0.02) with their setting ranges and instructions, useful for configuring the VFD for specific applications like CNC spindle motors.

6.3 Starting and Stopping the Motor

• Inici: Premeu el botó CÓRRER botó del tauler de control.
• Atura: Premeu el botó STOP/RST botó del tauler de control.
• Adjust motor speed using the potentiometer or programmed external controls.

7. Manteniment

Un manteniment regular garanteix la longevitat i el funcionament fiable del vostre variador de freqüència.

• Neteja: Keep the VFD clean and free from dust and debris. Use a soft, dry cloth for cleaning. Do not use liquid cleaners.
• Ventilació: Ensure adequate airflow around the VFD. Regularly check that cooling fans and vents are not obstructed.
• Connexions: Comproveu periòdicament totes les connexions elèctriques per assegurar-vos que estiguin ben ajustades. Les connexions soltes poden provocar sobreescalfament o un funcionament intermitent.
• Control ambiental: Verifiqueu que l'entorn operatiu es mantingui dins dels rangs de temperatura i humitat especificats.

Figura 7.1: Illustration of the VFD's cooling airflow. This image shows blue arrows indicating the path of air entering through the side vents and exiting through the top, demonstrating the cooling mechanism of the unit.

8. Solució De Problemes

Aquesta secció ofereix orientació per a problemes comuns. Per a problemes complexos, contacteu amb l'assistència tècnica.

9. Suport tècnic i garantia

For further assistance with parameter settings, troubleshooting, or any other technical inquiries, please contact MOLLOM customer support.

When contacting support, please provide your VFD model number (G75-220V) and a detailed description of your issue, including any error codes displayed on the VFD.

També podeu descarregar un manual d'usuari complet en format PDF: MOLLOM VFD User Manual (PDF).

Informació de la garantia: Please refer to the warranty card included with your product or contact MOLLOM customer service for details regarding warranty coverage and terms.

Figura 9.1: Illustration representing technical support. This image shows a stylized figure interacting with a parameter setting screen, symbolizing the availability of assistance for VFD configuration.