Yato YT-84995 43cc Gasoline Brush Cutter

1. Instruccions de seguretat importants

Read all safety warnings and instructions carefully before operating this brush cutter. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury. Keep this manual for future reference.

Seguretat general

• Always wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, gloves, long pants, and sturdy footwear.
• Do not operate the brush cutter when tired, under the influence of drugs, alcohol, or medication.
• Keep bystanders, children, and pets at a safe distance (at least 15 meters) from the operating area.
• Inspect the work area for objects that could be thrown or entangled in the cutting attachment. Remove any debris.
• Never modify the brush cutter. Use only manufacturer-approved attachments and replacement parts.

Seguretat del combustible

• Handle fuel with extreme care. Fuel is highly flammable.
• Mix fuel outdoors or in a well-ventilated area.
• Do not smoke or bring any flame or sparks near the fuel or the brush cutter.
• Store fuel in approved containers in a cool, well-ventilated area, away from ignition sources.

2. Contingut del paquet

Verify that all items are present and undamaged upon unpacking. If any parts are missing or damaged, contact your retailer.

• Yato YT-84995 Engine Unit
• Muntatge d’eixos
• Muntatge del manillar
• Cutting Blade (255mm)
• Assemblea de Guàrdia
• Arnès d'espatlla
• Tool Kit (for assembly)
• Ampolla de mescla de combustible
• Manual d'instruccions

3. Muntatge i muntatge

Assembly is required before first use. Follow these steps carefully.

3.1 Col·locació del manillar

1. Afloixeu els cargols del manillar.amp located on the shaft.
2. Position the handlebar assembly onto the shaft, ensuring it is centered and at a comfortable operating height.
3. Tighten the bolts securely to fix the handlebar in place.

3.2 Installing the Guard and Cutting Attachment

1. Attach the guard to the lower part of the shaft using the provided screws. Ensure it is firmly secured to protect against debris.
2. Mount the cutting blade onto the spindle, ensuring the correct orientation. Use the provided washers and nut, tightening them firmly.

Figura 1: Assembled Yato YT-84995 43cc Gasoline Brush Cutter. This image shows the complete brush cutter with its engine, shaft, handlebar, guard, and cutting blade. The main components are visible, including the fuel tank and the ergonomic handles.

3.3 Barreja de combustible

This brush cutter uses a 2-stroke engine and requires a specific fuel mixture.

• Barregeu gasolina sense plom amb oli de motor de 2 temps en una proporció de 40:1 (40 parts de gasolina per 1 part d'oli).
• Use the provided mixing bottle for accurate measurement.
• Shake the mixture thoroughly before pouring it into the fuel tank.

4. Instruccions de funcionament

Familiaritzeu-vos amb els controls i els procediments d'operació abans d'engegar el motor.

4.1 Arrencada del motor

1. Col·loqueu la desbrossadora sobre una superfície plana i estable.
2. Fill the fuel tank with the correct fuel mixture (0.85 L capacity).
3. Premeu la bombeta d'encebament diverses vegades fins que el combustible sigui visible.
4. Move the choke lever to the 'CLOSED' position.
5. Set the ignition switch to 'ON'.
6. Pull the starter cord firmly and steadily until the engine fires (usually 1-3 pulls).
7. Un cop el motor s'hagi engegat, moveu la palanca de l'estrangulador a la posició "OBERT".
8. Estireu de nou el cordó d'arrencada fins que el motor arrenqui i funcioni suaument.
9. Deixeu que el motor s'escalfi uns instants abans d'actuar amb l'accelerador.

4.2 Ús de la desbrossadora

• Attach the shoulder harness and adjust it for comfortable and balanced operation. The anti-vibration system helps reduce fatigue.
• Hold the handlebar firmly with both hands. The adjustable contoured handle provides precise control.
• Maintain a firm footing and balance.
• Engage the throttle gradually to bring the cutting attachment up to speed.
• Cut with a sweeping motion, moving from right to left for optimal cutting and debris ejection.
• Avoid hitting hard objects like rocks or fences, as this can damage the blade or the machine.

4.3 Parar el motor

• Release the throttle to allow the engine to idle.
• Move the ignition switch to the 'OFF' position.
• Wait for all moving parts to come to a complete stop before setting the machine down.

5. Manteniment

Regular maintenance ensures optimal performance and extends the life of your brush cutter.

5.1 Després de cada ús

• Clean the exterior of the brush cutter, removing grass, dirt, and debris.
• Inspect the cutting blade for damage or dullness. Sharpen or replace as needed.
• Check all nuts, bolts, and fasteners for tightness.

5.2 Manteniment periòdic

• Filtre d'aire: Clean or replace the air filter regularly (every 10-20 hours of operation) to ensure proper engine performance.
• Bujía: Inspect and clean the spark plug. Replace if worn or fouled (every 50 hours of operation).
• Filtre de combustible: Check and replace the fuel filter annually or if fuel delivery issues occur.
• Capçal d'engranatge: Lubricate the gear head with appropriate grease periodically.

5.3 Emmagatzematge

• Buideu completament el dipòsit de combustible o utilitzeu un estabilitzador de combustible si el guardeu durant més de 30 dies.
• Clean the brush cutter thoroughly.
• Store in a dry, well-ventilated area, away from children and ignition sources.

6. Solució De Problemes

Consulteu aquesta secció per conèixer els problemes comuns i les seves solucions.

7. Especificacions

• Marca: Yato - Poland
• Model: YT-84995
• Cilindrada del motor: 43 cm³
• Potència de sortida: 1.4 kW (1.7 CV)
• Tipus de combustible: Gasoline (2-stroke mix)
• Fuel Mix Ratio: 40:1 (Gasoline:2-stroke oil)
• Capacitat del dipòsit de combustible: 0.85 L
• Cutting Blade Diameter: 255 mm
• Cutting Diameter (Line): 430 mm
• Font d'alimentació: De gasolina
• Muntatge requerit: Sí

8. Garantia i Suport

For warranty information, please refer to the warranty card included with your product or contact your authorized Yato dealer. Keep your proof of purchase for any warranty claims.

For technical support, spare parts, or service, please contact your local Yato service center or visit the official Yato website. Provide your model number (YT-84995) and purchase details when seeking assistance.

Fabricant: Yato - Poland