UUPAS High Frequency Facial Wand Model U03 Instruction Manual

1. Producte acabatview

The UUPAS High Frequency Facial Wand Model U03 is a portable handheld device designed for various skin applications. It utilizes high-frequency technology with different glass electrode tubes to address specific areas of the face, hair, and body. This manual provides essential information for safe and effective operation.

Image 1.1: UUPAS High Frequency Facial Wand, including the main device, six glass electrode tubes, and the product packaging.

2. Informació important de seguretat

Please read all safety warnings and instructions carefully before using this device. Failure to follow these instructions may result in injury or damage to the device.

• Do not use if you are pregnant, have a pacemaker, heart disease, epilepsy, or any metal implants.
• Avoid using on broken skin, open wounds, or areas with severe acne or inflammation.
• Do not use near water or in a wet environment.
• Mantenir fora de l'abast dels nens.
• Avoid direct contact with eyes. If contact occurs, rinse immediately with water.
• Do not use with flammable products such as alcohol-based cleansers or toners.
• Always ensure the glass electrode is fully inserted into the wand before turning on the device.
• No deixeu el dispositiu sense vigilància mentre està en funcionament.
• Si experimenteu alguna molèstia o reacció adversa, interrompeu l'ús immediatament.

3. Components

The UUPAS High Frequency Facial Wand Model U03 includes the main wand device and six specialized glass electrode tubes, each designed for different applications:

Imatge 3.1: acabatview of the six included glass electrode tubes.

• Mushroom Tube: Suitable for broader areas of the face such as cheeks, forehead, and chin.
• Y-shape Tube: Designed for use on the neck, arms, and knees.
• Tungsten Tube: Ideal for larger, flatter areas like the forehead and other wider body areas.
• Bent Tube: Useful for narrow gaps and hard-to-reach areas, such as around the eyes and nose.
• Tongue Tube: Suitable for use around the eyes or around the nose.
• Comb Tube: Specifically designed for hair and scalp applications.

4. Configuració

Follow these steps to prepare your UUPAS High Frequency Facial Wand for use:

1. Neteja la pell: Ensure your skin is clean and dry before beginning the treatment.
2. Inseriu l'elèctrode: Choose the desired glass electrode tube. Gently insert the metal end of the tube into the high-frequency wand handle. Ensure it is securely in place. Do not force the tube.

Image 4.1: Illustration of inserting a glass electrode tube into the wand handle.

5. Instruccions de funcionament

The UUPAS High Frequency Facial Wand can be used with direct or indirect methods. Always start with the lowest intensity setting and gradually increase as needed.

Passos d'ús generals:

1. Ajustar la intensitat: Turn the power switch to activate the device. Rotate the knob to adjust the intensity level from low to high according to your comfort and needs.

Image 5.1: Adjusting the intensity of the high frequency wand.

2. Test on Hand: Before applying to the treatment area, touch the glass tube with your hand to feel and adapt to the appropriate strength.

Image 5.2: Testing the device on a finger to gauge intensity.

3. Aplica a la zona: Begin by touching the glass tube to the skin. Move the electrode in small circular motions over the treatment area. Do not stay on the same spot for more than 10 seconds.

Image 5.3: Applying the high frequency wand to the skin.

Ús recomanat:

• Use 2-3 times per week.
• Each session should last between 10-20 minutes.

Demostració de vídeo:

6. Manteniment i cura

• Neteja: After each use, gently wipe the glass electrodes with a soft cloth dampened with alcohol or an antiseptic solution. Ensure the electrodes are completely dry before storing.
• Emmagatzematge: Store the device and electrodes in their original packaging or a protective case in a cool, dry place, away from direct sunlight and extreme temperatures.
• Manipulació: Handle glass electrodes with care as they are fragile. Avoid dropping or subjecting them to impact.

7. Solució De Problemes

• El dispositiu no s'encén: Ensure the power cord is securely plugged into a working outlet and the intensity knob is turned up from the 'OFF' position.
• No Glow from Electrode: Verify that the glass electrode is fully and correctly inserted into the wand handle. Ensure the intensity is set to an appropriate level. The glow may be faint in brightly lit rooms.
• Weak Sensation: Increase the intensity level gradually. Ensure good contact between the electrode and your skin.
• Sparking/Zapping Sensation: This is normal when the electrode is first brought into contact with the skin or lifted away. To minimize this, place the electrode on the skin before turning the device on, and turn it off before removing it from the skin. Ensure the intensity is not set too high.

8. Especificacions

9. Garantia i Suport

For detailed warranty information, product registration, or customer support, please refer to the documentation included with your product packaging or visit the official UUPAS weblloc. Conserveu el rebut de compra per a reclamacions de garantia.